00000 The operation completed successfully. 00001 Incorrect function. 00002 The system cannot find the file specified. 00003 The system cannot find the path specified. 00004 The system cannot open the file. 00005 Access is denied. 00006 The handle is invalid. 00007 The storage control blocks were destroyed. 00008 Not enough storage is available to process this command. 00009 The storage control block address is invalid. 00010 The environment is incorrect. 00011 An attempt was made to load a program with an incorrect format. 00012 The access code is invalid. 00013 The data is invalid. 00014 Not enough storage is available to complete this operation. 00015 The system cannot find the drive specified. 00016 The directory cannot be removed. 00017 The system cannot move the file to a different disk drive. 00018 There are no more files. 00019 The media is write protected. 00020 The system cannot find the device specified. 00021 The device is not ready. 00022 The device does not recognize the command. 00023 Data error (cyclic redundancy check). 00024 The program issued a command but the command length is incorrect. 00025 The drive cannot locate a specific area or track on the disk. 00026 The specified disk or diskette cannot be accessed. 00027 The drive cannot find the sector requested. 00028 The printer is out of paper. 00029 The system cannot write to the specified device. 00030 The system cannot read from the specified device. 00031 A device attached to the system is not functioning. 00032 The process cannot access the file because it is being used by another process. 00033 The process cannot access the file because another process has locked a portion of the file. 00036 Too many files opened for sharing. 00038 Reached the end of the file. 00039 The disk is full. 00050 The network request is not supported. 00051 The remote computer is not available. 00052 A duplicate name exists on the network. 00053 The network path was not found. 00054 The network is busy. 00055 The specified network resource or device is no longer available. 00056 The network BIOS command limit has been reached. 00057 A network adapter hardware error occurred. 00058 The specified server cannot perform the requested operation. 00059 An unexpected network error occurred. 00060 The remote adapter is not compatible. 00061 The printer queue is full. 00062 Space to store the file waiting to be printed is not available on the server. 00063 Your file waiting to be printed was deleted. 00064 The specified network name is no longer available. 00065 Network access is denied. 00066 The network resource type is not correct. 00067 The network name cannot be found. 00068 The name limit for the local computer network adapter card was exceeded. 00069 The network BIOS session limit was exceeded. 00070 The remote server has been paused or is in the process of being started. 00071 No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. 00072 The specified printer or disk device has been paused. 00080 The file exists. 00082 The directory or file cannot be created. 00083 Fail on INT 24. 00084 Storage to process this request is not available. 00085 The local device name is already in use. 00086 The specified network password is not correct. 00087 The parameter is incorrect. 00088 A write fault occurred on the network. 00089 The system cannot start another process at this time. 00100 Cannot create another system semaphore. 00101 The exclusive semaphore is owned by another process. 00102 The semaphore is set and cannot be closed. 00103 The semaphore cannot be set again. 00104 Cannot request exclusive semaphores at interrupt time. 00105 The previous ownership of this semaphore has ended. 00107 The program stopped because an alternate diskette was not inserted. 00108 The disk is in use or locked by 00108 another process. 00109 The pipe has been ended. 00110 The system cannot open the 00110 device or file specified. 00111 The file name is too long. 00112 There is not enough space on the disk. 00113 No more internal file identifiers available. 00114 The target internal file identifier is incorrect. 00117 The IOCTL call made by the application program is not correct. 00118 The verify-on-write switch parameter value is not correct. 00119 The system does not support the command requested. 00120 This function is not supported on this system. 00121 The semaphore timeout period has expired. 00122 The data area passed to a system call is too small. 00123 The filename, directory name, or volume label syntax is incorrect. 00124 The system call level is not correct. 00125 The disk has no volume label. 00126 The specified module could not be found. 00127 The specified procedure could not be found. 00128 There are no child processes to wait for. 00130 Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O. 00131 An attempt was made to move the file pointer before the beginning of the file. 00132 The file pointer cannot be set on the specified device or file. 00133 A JOIN or SUBST command cannot be used for a drive that contains previously joined drives. 00134 An attempt was made to use a JOIN or SUBST command on a drive that has already been joined. 00135 An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted. 00136 The system tried to delete the JOIN of a drive that is not joined. 00137 The system tried to delete the substitution of a drive that is not substituted. 00138 The system tried to join a drive to a directory on a joined drive. 00139 The system tried to substitute a drive to a directory on a substituted drive. 00140 The system tried to join a drive to a directory on a substituted drive. 00141 The system tried to SUBST a drive to a directory on a joined drive. 00142 The system cannot perform a JOIN or SUBST at this time. 00143 The system cannot join or substitute a drive to or for a directory on the same drive. 00144 The directory is not a subdirectory of the root directory. 00145 The directory is not empty. 00146 The path specified is being used in a substitute. 00147 Not enough resources are available to process this command. 00148 The path specified cannot be used at this time. 00149 An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. 00150 System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed. 00151 The number of specified semaphore events for DosMuxSemWait is not correct. 00152 DosMuxSemWait did not execute; too many semaphores are already set. 00153 The DosMuxSemWait list is not correct. 00154 The volume label you entered exceeds the label character 00154 limit of the target file system. 00155 Cannot create another thread. 00156 The recipient process has refused the signal. 00157 The segment is already discarded and cannot be locked. 00158 The segment is already unlocked. 00159 The address for the thread ID is not correct. 00160 The argument string passed to DosExecPgm is not correct. 00161 The specified path is invalid. 00162 A signal is already pending. 00164 No more threads can be created in the system. 00167 Unable to lock a region of a file. 00170 The requested resource is in use. 00173 A lock request was not outstanding for the supplied cancel region. 00174 The file system does not support atomic changes to the lock type. 00180 The system detected a segment number that was not correct. 00183 Cannot create a file when that file already exists. 00186 The flag passed is not correct. 00187 The specified system semaphore name was not found. 00196 The operating system cannot run this application program. 00197 The operating system is not presently configured to run this application. 00199 The operating system cannot run this application program. 00200 The code segment cannot be greater than or equal to 64K. 00203 The system could not find the environment 00203 option that was entered. 00205 No process in the command subtree has a 00205 signal handler. 00206 The filename or extension is too long. 00207 The ring 2 stack is in use. 00208 The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified. 00209 The signal being posted is not correct. 00210 The signal handler cannot be set. 00212 The segment is locked and cannot be reallocated. 00214 Too many dynamic-link modules are attached to this program or dynamic-link module. 00215 Cannot nest calls to LoadModule. 00230 The pipe state is invalid. 00231 All pipe instances are busy. 00232 The pipe is being closed. 00233 No process is on the other end of the pipe. 00234 More data is available. 00240 The session was canceled. 00254 The specified extended attribute name was invalid. 00255 The extended attributes are inconsistent. 00258 The wait operation timed out. 00259 No more data is available. 00266 The copy functions cannot be used. 00267 The directory name is invalid. 00275 The extended attributes did not fit in the buffer. 00276 The extended attribute file on the mounted file system is corrupt. 00277 The extended attribute table file is full. 00278 The specified extended attribute handle is invalid. 00282 The mounted file system does not support extended attributes. 00288 Attempt to release mutex not owned by caller. 00298 Too many posts were made to a semaphore. 00299 Only part of a ReadProcessMemory or WriteProcessMemory request was completed. 00300 The oplock request is denied. 00301 An invalid oplock acknowledgment was received by the system. 00487 Attempt to access invalid address. 00534 Arithmetic result exceeded 32 bits. 00535 There is a process on other end of the pipe. 00536 Waiting for a process to open the other end of the pipe. 00994 Access to the extended attribute was denied. 00995 The I/O operation has been aborted because of either a thread exit or an application request. 00996 Overlapped I/O event is not in a signaled state. 00997 Overlapped I/O operation is in progress. 00998 Invalid access to memory location. 00999 Error performing inpage operation. 01001 Recursion too deep; the stack overflowed. 01002 The window cannot act on the sent message. 01003 Cannot complete this function. 01004 Invalid flags. 01005 The volume does not contain a recognized file system. 01005 Please make sure that all required file system drivers are loaded and that the volume is not corrupted. 01006 The volume for a file has been externally altered so that the opened file is no longer valid. 01007 The requested operation cannot be performed in full-screen mode. 01008 An attempt was made to reference a token that does not exist. 01009 The configuration registry database is corrupt. 01010 The configuration registry key is invalid. 01011 The configuration registry key could not be opened. 01012 The configuration registry key could not be read. 01013 The configuration registry key could not be written. 01014 One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful. 01015 The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted. 01016 An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry. 01017 The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format. 01018 Illegal operation attempted on a registry key that has been marked for deletion. 01019 System could not allocate the required space in a registry log. 01020 Cannot create a symbolic link in a registry key that already has subkeys or values. 01021 Cannot create a stable subkey under a volatile parent key. 01022 A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes. 01051 A stop control has been sent to a service that other running services are dependent on. 01052 The requested control is not valid for this service. 01053 The service did not respond to the start or control request in a timely fashion. 01054 A thread could not be created for the service. 01055 The service database is locked. 01056 An instance of the service is already running. 01057 The account name is invalid or does not exist, or the password is invalid for the account name specified. 01058 The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. 01059 Circular service dependency was specified. 01060 The specified service does not exist as an installed service. 01061 The service cannot accept control messages at this time. 01062 The service has not been started. 01063 The service process could not connect to the service controller. 01064 An exception occurred in the service when handling the control request. 01065 The database specified does not exist. 01066 The service has returned a service-specific error code. 01067 The process terminated unexpectedly. 01068 The dependency service or group failed to start. 01069 The service did not start due to a logon failure. 01070 After starting, the service hung in a start-pending state. 01071 The specified service database lock is invalid. 01072 The specified service has been marked for deletion. 01073 The specified service already exists. 01074 The system is currently running with the last-known-good configuration. 01075 The dependency service does not exist or has been marked for deletion. 01076 The current boot has already been accepted for use as the last-known-good control set. 01077 No attempts to start the service have been made since the last boot. 01078 The name is already in use as either a service name or a service display name. 01079 The account specified for this service is different from the account specified for other services running in the same process. 01080 Failure actions can only be set for Win32 services, not for drivers. 01081 This service runs in the same process as the service control manager. 01081 Therefore, the service control manager cannot take action if this service's process terminates unexpectedly. 01082 No recovery program has been configured for this service. 01083 The executable program that this service is configured to run in does not implement the service. 01100 The physical end of the tape has been reached. 01101 A tape access reached a filemark. 01102 The beginning of the tape or a partition was encountered. 01103 A tape access reached the end of a set of files. 01104 No more data is on the tape. 01105 Tape could not be partitioned. 01106 When accessing a new tape of a multivolume partition, the current block size is incorrect. 01107 Tape partition information could not be found when loading a tape. 01108 Unable to lock the media eject mechanism. 01109 Unable to unload the media. 01110 The media in the drive may have changed. 01111 The I/O bus was reset. 01112 No media in drive. 01113 No mapping for the Unicode character exists in the target multi-byte code page. 01114 A dynamic link library (DLL) initialization routine failed. 01115 A system shutdown is in progress. 01116 Unable to abort the system shutdown because no shutdown was in progress. 01117 The request could not be performed because of an I/O device error. 01118 No serial device was successfully initialized. The serial driver will unload. 01119 Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened. 01120 A serial I/O operation was completed by another write to the serial port. 01120 (The IOCTL_SERIAL_XOFF_COUNTER reached zero.) 01121 A serial I/O operation completed because the timeout period expired. 01121 (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.) 01122 No ID address mark was found on the floppy disk. 01123 Mismatch between the floppy disk sector ID field and the floppy disk controller track address. 01124 The floppy disk controller reported an error that is not recognized by the floppy disk driver. 01125 The floppy disk controller returned inconsistent results in its registers. 01126 While accessing the hard disk, a recalibrate operation failed, even after retries. 01127 While accessing the hard disk, a disk operation failed even after retries. 01128 While accessing the hard disk, a disk controller reset was needed, but even that failed. 01129 Physical end of tape encountered. 01130 Not enough server storage is available to process this command. 01131 A potential deadlock condition has been detected. 01132 The base address or the file offset specified does not have the proper alignment. 01140 An attempt to change the system power state was vetoed by another application or driver. 01141 The system BIOS failed an attempt to change the system power state. 01142 An attempt was made to create more links on a file than the file system supports. 01150 The specified program requires a newer version of Windows. 01151 The specified program is not a Windows or MS-DOS program. 01152 Cannot start more than one instance of the specified program. 01153 The specified program was written for an earlier version of Windows. 01154 One of the library files needed to run this application is damaged. 01155 No application is associated with the specified file for this operation. 01156 An error occurred in sending the command to the application. 01157 One of the library files needed to run this application cannot be found. 01158 The current process has used all of its system allowance of handles for Window Manager objects. 01159 The message can be used only with synchronous operations. 01160 The indicated source element has no media. 01161 The indicated destination element already contains media. 01162 The indicated element does not exist. 01163 The indicated element is part of a magazine that is not present. 01164 The indicated device requires reinitialization due to hardware errors. 01165 The device has indicated that cleaning is required before further operations are attempted. 01166 The device has indicated that its door is open. 01167 The device is not connected. 01168 Element not found. 01169 There was no match for the specified key in the index. 01170 The property set specified does not exist on the object. 01171 The point passed to GetMouseMovePoints is not in the buffer. 01172 The tracking (workstation) service is not running. 01173 The Volume ID could not be found. 01175 Unable to remove the file to be replaced. 01176 Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name. 01177 Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name. 01178 The volume change journal is being deleted. 01179 The volume change journal service is not active. 01180 A file was found, but it may not be the correct file. 01181 The journal entry has been deleted from the journal. 01200 The specified device name is invalid. 01201 The device is not currently connected but it is a remembered connection. 01202 An attempt was made to remember a device that had previously been remembered. 01203 No network provider accepted the given network path. 01204 The specified network provider name is invalid. 01205 Unable to open the network connection profile. 01206 The network connection profile is corrupted. 01207 Cannot enumerate a noncontainer. 01208 An extended error has occurred. 01209 The format of the specified group name is invalid. 01210 The format of the specified computer name is invalid. 01211 The format of the specified event name is invalid. 01212 The format of the specified domain name is invalid. 01213 The format of the specified service name is invalid. 01214 The format of the specified network name is invalid. 01215 The format of the specified share name is invalid. 01216 The format of the specified password is invalid. 01217 The format of the specified message name is invalid. 01218 The format of the specified message destination is invalid. 01219 The credentials supplied conflict with an existing set of credentials. 01220 An attempt was made to establish a session to a network server, but there are already too many sessions established to that server. 01221 The workgroup or domain name is already in use by another computer on the network. 01222 The network is not present or not started. 01223 The operation was canceled by the user. 01224 The requested operation cannot be performed on a file with a user-mapped section open. 01225 The remote system refused the network connection. 01226 The network connection was gracefully closed. 01227 The network transport endpoint already has an address associated with it. 01228 An address has not yet been associated with the network endpoint. 01229 An operation was attempted on a nonexistent network connection. 01230 An invalid operation was attempted on an active network connection. 01231 The network location cannot be reached. For information about network troubleshooting, see Windows Help. 01232 The network location cannot be reached. For information about network troubleshooting, see Windows Help. 01233 The network location cannot be reached. For information about network troubleshooting, see Windows Help. 01234 No service is operating at the destination network endpoint on the remote system. 01235 The request was aborted. 01236 The network connection was aborted by the local system. 01237 The operation could not be completed. A retry should be performed. 01238 A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached. 01239 Attempting to log in during an unauthorized time of day for this account. 01240 The account is not authorized to log in from this station. 01241 The network address could not be used for the operation requested. 01242 The service is already registered. 01243 The specified service does not exist. 01244 The operation being requested was not performed because the user has not been authenticated. 01245 The operation being requested was not performed because the user has not logged on to the network. 01245 The specified service does not exist. 01246 Continue with work in progress. 01247 An attempt was made to perform an initialization operation when initialization has already been completed. 01248 No more local devices. 01249 The specified site does not exist. 01250 A domain controller with the specified name already exists. 01251 This operation is supported only when you are connected to the server. 01252 The group policy framework should call the extension even if there are no changes. 01253 The specified user does not have a valid profile. 01254 This operation is not supported on a Microsoft Small Business Server 01300 Not all privileges referenced are assigned to the caller. 01301 Some mapping between account names and security IDs was not done. 01302 No system quota limits are specifically set for this account. 01303 No encryption key is available. A well-known encryption key was returned. 01304 The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string. 01305 The revision level is unknown. 01306 Indicates two revision levels are incompatible. 01307 This security ID may not be assigned as the owner of this object. 01308 This security ID may not be assigned as the primary group of an object. 01309 An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client. 01310 The group may not be disabled. 01311 There are currently no logon servers available to service the logon request. 01312 A specified logon session does not exist. It may already have been terminated. 01313 A specified privilege does not exist. 01314 A required privilege is not held by the client. 01315 The name provided is not a properly formed account name. 01316 The specified user already exists. 01317 The specified user does not exist. 01318 The specified group already exists. 01319 The specified group does not exist. 01320 Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member. 01321 The specified user account is not a member of the specified group account. 01322 The last remaining administration account cannot be disabled or deleted. 01323 Unable to update the password. The value provided as the current password is incorrect. 01324 Unable to update the password. The value provided for the new password contains values that are not allowed in passwords. 01325 Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirement of the domain. 01326 Logon failure: unknown user name or bad password. 01327 Logon failure: user account restriction. 01328 Logon failure: account logon time restriction violation. 01329 Logon failure: user not allowed to log on to this computer. 01330 Logon failure: the specified account password has expired. 01331 Logon failure: account currently disabled. 01332 No mapping between account names and security IDs was done. 01333 Too many local user identifiers (LUIDs) were requested at one time. 01334 No more local user identifiers (LUIDs) are available. 01335 The subauthority part of a security ID is invalid for this particular use. 01336 The access control list (ACL) structure is invalid. 01337 The security ID structure is invalid. 01338 The security descriptor structure is invalid. 01340 The inherited access control list (ACL) or access control entry (ACE) could not be built. 01341 The server is currently disabled. 01342 The server is currently enabled. 01343 The value provided was an invalid value for an identifier authority. 01344 No more memory is available for security information updates. 01345 The specified attributes are invalid, or incompatible with the attributes for the group as a whole. 01346 Either a required impersonation level was not provided, or the provided impersonation level is invalid. 01347 Cannot open an anonymous level security token. 01348 The validation information class requested was invalid. 01349 The type of the token is inappropriate for its attempted use. 01350 Unable to perform a security operation on an object that has no associated security. 01351 Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied. 01352 The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation. 01353 The domain was in the wrong state to perform the security operation. 01354 This operation is only allowed for the Primary Domain Controller of the domain. 01355 The specified domain either does not exist or could not be contacted. 01356 The specified domain already exists. 01357 An attempt was made to exceed the limit on the number of domains per server. 01358 Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk. 01359 An internal error occurred. 01360 Generic access types were contained in an access mask which should already be mapped to nongeneric types. 01361 A security descriptor is not in the right format (absolute or self-relative). 01362 The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process. 01363 Cannot start a new logon session with an ID that is already in use. 01364 A specified authentication package is unknown. 01365 The logon session is not in a state that is consistent with the requested operation. 01366 The logon session ID is already in use. 01367 A logon request contained an invalid logon type value. 01368 Unable to impersonate using a named pipe until data has been read from that pipe. 01369 The transaction state of a registry subtree is incompatible with the requested operation. 01370 An internal security database corruption has been encountered. 01371 Cannot perform this operation on built-in accounts. 01372 Cannot perform this operation on this built-in special group. 01373 Cannot perform this operation on this built-in special user. 01374 The user cannot be removed from a group because the group is currently the user's primary group. 01375 The token is already in use as a primary token. 01376 The specified local group does not exist. 01377 The specified account name is not a member of the local group. 01378 The specified account name is already a member of the local group. 01379 The specified local group already exists. 01380 Logon failure: the user has not been granted the requested logon type at this computer. 01381 The maximum number of secrets that may be stored in a single system has been exceeded. 01382 The length of a secret exceeds the maximum length allowed. 01383 The local security authority database contains an internal inconsistency. 01384 During a logon attempt, the user's security context accumulated too many security IDs. 01385 Logon failure: the user has not been granted the requested logon type at this computer. 01386 A cross-encrypted password is necessary to change a user password. 01387 A member could not be added to or removed from the local group because the member does not exist. 01388 A new member could not be added to a local group because the member has the wrong account type. 01389 Too many security IDs have been specified. 01390 A cross-encrypted password is necessary to change this user password. 01391 Indicates an ACL contains no inheritable components. 01392 The file or directory is corrupted and unreadable. 01393 The disk structure is corrupted and unreadable. 01394 There is no user session key for the specified logon session. 01395 The service being accessed is licensed for a particular number of connections. 01395 No more connections can be made to the service at this time because there are already as many connections as the service can accept. 01396 Logon Failure: The target account name is incorrect. 01397 Mutual Authentication failed. The server's password is out of date at the domain controller. 01398 There is a time difference between the client and server. 01400 Invalid window handle. 01401 Invalid menu handle. 01402 Invalid cursor handle. 01403 Invalid accelerator table handle. 01404 Invalid hook handle. 01405 Invalid handle to a multiple-window position structure. 01406 Cannot create a top-level child window. 01407 Cannot find window class. 01408 Invalid window; it belongs to other thread. 01409 Hot key is already registered. 01410 Class already exists. 01411 Class does not exist. 01412 Class still has open windows. 01413 Invalid index. 01414 Invalid icon handle. 01415 Using private DIALOG window words. 01416 The list box identifier was not found. 01417 No wildcards were found. 01418 Thread does not have a clipboard open. 01419 Hot key is not registered. 01420 The window is not a valid dialog window. 01421 Control ID not found. 01422 Invalid message for a combo box because it does not have an edit control. 01423 The window is not a combo box. 01424 Height must be less than 256. 01425 Invalid device context (DC) handle. 01426 Invalid hook procedure type. 01427 Invalid hook procedure. 01428 Cannot set nonlocal hook without a module handle. 01429 This hook procedure can only be set globally. 01430 The journal hook procedure is already installed. 01431 The hook procedure is not installed. 01432 Invalid message for single-selection list box. 01433 LB_SETCOUNT sent to non-lazy list box. 01434 This list box does not support tab stops. 01435 Cannot destroy object created by another thread. 01436 Child windows cannot have menus. 01437 The window does not have a system menu. 01438 Invalid message box style. 01439 Invalid system-wide (SPI_*) parameter. 01440 Screen already locked. 01441 All handles to windows in a multiple-window position structure must have the same parent. 01442 The window is not a child window. 01443 Invalid GW_* command. 01444 Invalid thread identifier. 01445 Cannot process a message from a window that is not a multiple document interface (MDI) window. 01446 Popup menu already active. 01447 The window does not have scroll bars. 01448 Scroll bar range cannot be greater than MAXLONG. 01449 Cannot show or remove the window in the way specified. 01450 Insufficient system resources exist to complete the requested service. 01451 Insufficient system resources exist to complete the requested service. 01452 Insufficient system resources exist to complete the requested service. 01453 Insufficient quota to complete the requested service. 01454 Insufficient quota to complete the requested service. 01455 The paging file is too small for this operation to complete. 01456 A menu item was not found. 01457 Invalid keyboard layout handle. 01458 Hook type not allowed. 01459 This operation requires an interactive window station. 01460 This operation returned because the timeout period expired. 01461 Invalid monitor handle. 01500 The event log file is corrupted. 01501 No event log file could be opened, so the event logging service did not start. 01502 The event log file is full. 01503 The event log file has changed between read operations. 01601 The Windows Installer service could not be accessed. Contact your support personnel to verify that the Windows Installer service is properly registered. 01602 User cancelled installation. 01603 Fatal error during installation. 01604 Installation suspended, incomplete. 01605 This action is only valid for products that are currently installed. 01606 Feature ID not registered. 01607 Component ID not registered. 01608 Unknown property. 01609 Handle is in an invalid state. 01610 The configuration data for this product is corrupt. Contact your support personnel. 01611 Component qualifier not present. 01612 The installation source for this product is not available. Verify that the source exists and that you can access it. 01613 This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service. 01614 Product is uninstalled. 01615 SQL query syntax invalid or unsupported. 01616 Record field does not exist. 01617 The device has been removed. 01618 Another installation is already in progress. Complete that installation before proceeding with this install. 01619 This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. 01620 This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package. 01621 There was an error starting the Windows Installer service user interface. Contact your support personnel. 01622 Error opening installation log file. Verify that the specified log file location exists and that you can write to it. 01623 The language of this installation package is not supported by your system. 01624 Error applying transforms. Verify that the specified transform paths are valid. 01625 This installation is forbidden by system policy. Contact your system administrator. 01626 Function could not be executed. 01627 Function failed during execution. 01628 Invalid or unknown table specified. 01629 Data supplied is of wrong type. 01630 Data of this type is not supported. 01631 The Windows Installer service failed to start. Contact your support personnel. 01632 The temp folder is either full or inaccessible. Verify that the temp folder exists and that you can write to it. 01633 This installation package is not supported by this processor type. Contact your product vendor. 01634 Component not used on this computer. 01635 This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package. 01636 This patch package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer patch package. 01637 This patch package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service. 01638 Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel. 01639 Invalid command line argument. Consult the Windows Installer SDK for detailed command line help. 01640 Only administrators have permission to add, remove, or configure server software during a Terminal services remote session. If you want to install or configure software on the server, contact your network administrator. 01641 The requested operation completed successfully. The system will be restarted so the changes can take effect. 01642 The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch. 01700 The string binding is invalid. 01701 The binding handle is not the correct type. 01702 The binding handle is invalid. 01703 The RPC protocol sequence is not supported. 01704 The RPC protocol sequence is invalid. 01705 The string universal unique identifier (UUID) is invalid. 01706 The endpoint format is invalid. 01707 The network address is invalid. 01708 No endpoint was found. 01709 The timeout value is invalid. 01710 The object universal unique identifier (UUID) was not found. 01711 The object universal unique identifier (UUID) has already been registered. 01712 The type universal unique identifier (UUID) has already been registered. 01713 The RPC server is already listening. 01714 No protocol sequences have been registered. 01715 The RPC server is not listening. 01716 The manager type is unknown. 01717 The interface is unknown. 01718 There are no bindings. 01719 There are no protocol sequences. 01720 The endpoint cannot be created. 01721 Not enough resources are available to complete this operation. 01722 The RPC server is unavailable. 01723 The RPC server is too busy to complete this operation. 01724 The network options are invalid. 01725 There are no remote procedure calls active on this thread. 01726 The remote procedure call failed. 01727 The remote procedure call failed and did not execute. 01728 A remote procedure call (RPC) protocol error occurred. 01730 The transfer syntax is not supported by the RPC server. 01732 The universal unique identifier (UUID) type is not supported. 01733 The tag is invalid. 01734 The array bounds are invalid. 01735 The binding does not contain an entry name. 01736 The name syntax is invalid. 01737 The name syntax is not supported. 01739 No network address is available to use to construct a universal unique identifier (UUID). 01740 The endpoint is a duplicate. 01741 The authentication type is unknown. 01742 The maximum number of calls is too small. 01743 The string is too long. 01744 The RPC protocol sequence was not found. 01745 The procedure number is out of range. 01746 The binding does not contain any authentication information. 01747 The authentication service is unknown. 01748 The authentication level is unknown. 01749 The security context is invalid. 01750 The authorization service is unknown. 01751 The entry is invalid. 01752 The server endpoint cannot perform the operation. 01753 There are no more endpoints available from the endpoint mapper. 01754 No interfaces have been exported. 01755 The entry name is incomplete. 01756 The version option is invalid. 01757 There are no more members. 01758 There is nothing to unexport. 01759 The interface was not found. 01760 The entry already exists. 01761 The entry is not found. 01762 The name service is unavailable. 01763 The network address family is invalid. 01764 The requested operation is not supported. 01765 No security context is available to allow impersonation. 01766 An internal error occurred in a remote procedure call (RPC). 01767 The RPC server attempted an integer division by zero. 01768 An addressing error occurred in the RPC server. 01769 A floating-point operation at the RPC server caused a division by zero. 01770 A floating-point underflow occurred at the RPC server. 01771 A floating-point overflow occurred at the RPC server. 01772 The list of RPC servers available for the binding of auto handles has been exhausted. 01773 Unable to open the character translation table file. 01774 The file containing the character translation table has fewer than 512 bytes. 01775 A null context handle was passed from the client to the host during a remote procedure call. 01777 The context handle changed during a remote procedure call. 01778 The binding handles passed to a remote procedure call do not match. 01779 The stub is unable to get the remote procedure call handle. 01780 A null reference pointer was passed to the stub. 01781 The enumeration value is out of range. 01782 The byte count is too small. 01783 The stub received bad data. 01784 The supplied user buffer is not valid for the requested operation. 01785 The disk media is not recognized. It may not be formatted. 01786 The workstation does not have a trust secret. 01787 The security database on the server does not have a computer account for this workstation trust relationship. 01788 The trust relationship between the primary domain and the trusted domain failed. 01789 The trust relationship between this workstation and the primary domain failed. 01790 The network logon failed. 01791 A remote procedure call is already in progress for this thread. 01792 An attempt was made to logon, but the network logon service was not started. 01793 The user's account has expired. 01794 The redirector is in use and cannot be unloaded. 01795 The specified printer driver is already installed. 01796 The specified port is unknown. 01797 The printer driver is unknown. 01798 The print processor is unknown. 01799 The specified separator file is invalid. 01800 The specified priority is invalid. 01801 The printer name is invalid. 01802 The printer already exists. 01803 The printer command is invalid. 01804 The specified datatype is invalid. 01805 The environment specified is invalid. 01806 There are no more bindings. 01807 The account used is an interdomain trust account. Use your global user account or local user account to access this server. 01808 The account used is a computer account. Use your global user account or local user account to access this server. 01809 The account used is a server trust account. Use your global user account or local user account to access this server. 01810 The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain. 01811 The server is in use and cannot be unloaded. 01812 The specified image file did not contain a resource section. 01813 The specified resource type cannot be found in the image file. 01814 The specified resource name cannot be found in the image file. 01815 The specified resource language ID cannot be found in the image file. 01816 Not enough quota is available to process this command. 01817 No interfaces have been registered. 01818 The remote procedure call was cancelled. 01819 The binding handle does not contain all required information. 01820 A communications failure occurred during a remote procedure call. 01821 The requested authentication level is not supported. 01822 No principal name registered. 01823 The error specified is not a valid Windows RPC error code. 01824 A UUID that is valid only on this computer has been allocated. 01825 A security package specific error occurred. 01826 Thread is not canceled. 01827 Invalid operation on the encoding/decoding handle. 01828 Incompatible version of the serializing package. 01829 Incompatible version of the RPC stub. 01830 The RPC pipe object is invalid or corrupted. 01831 An invalid operation was attempted on an RPC pipe object. 01832 Unsupported RPC pipe version. 01898 The group member was not found. 01899 The endpoint mapper database entry could not be created. 01900 The object universal unique identifier (UUID) is the nil UUID. 01901 The specified time is invalid. 01902 The specified form name is invalid. 01903 The specified form size is invalid. 01904 The specified printer handle is already being waited on 01905 The specified printer has been deleted. 01906 The state of the printer is invalid. 01907 The user's password must be changed before logging on the first time. 01908 Could not find the domain controller for this domain. 01909 The referenced account is currently locked out and may not be logged on to. 01910 The object exporter specified was not found. 01911 The object specified was not found. 01912 The object resolver set specified was not found. 01913 Some data remains to be sent in the request buffer. 01914 Invalid asynchronous remote procedure call handle. 01915 Invalid asynchronous RPC call handle for this operation. 01916 The RPC pipe object has already been closed. 01917 The RPC call completed before all pipes were processed. 01918 No more data is available from the RPC pipe. 01919 No site name is available for this machine. 01920 The file can not be accessed by the system. 01921 The name of the file cannot be resolved by the system. 01922 The entry is not of the expected type. 01923 Not all object UUIDs could be exported to the specified entry. 01924 Interface could not be exported to the specified entry. 01925 The specified profile entry could not be added. 01926 The specified profile element could not be added. 01927 The specified profile element could not be removed. 01928 The group element could not be added. 01929 The group element could not be removed. 02000 The pixel format is invalid. 02001 The specified driver is invalid. 02002 The window style or class attribute is invalid for this operation. 02003 The requested metafile operation is not supported. 02004 The requested transformation operation is not supported. 02005 The requested clipping operation is not supported. 02010 The specified color management module is invalid. 02011 The specified color profile is invalid. 02012 The specified tag was not found. 02013 A required tag is not present. 02014 The specified tag is already present. 02015 The specified color profile is not associated with any device. 02016 The specified color profile was not found. 02017 The specified color space is invalid. 02018 Image Color Management is not enabled. 02019 There was an error while deleting the color transform. 02020 The specified color transform is invalid. 02021 The specified transform does not match the bitmap's color space. 02022 The specified named color index is not present in the profile. 02102 The workstation driver is not installed. 02102 EXPLANATION 02102 02102 Windows NT is not installed, or your configuration file is incorrect. 02102 02102 ACTION 02102 02102 Install Windows NT, or see your network administrator about possible problems 02102 with your configuration file. 02102 02103 The server could not be located. 02103 EXPLANATION 02103 This message should occur only on a down-level computer. Any action to correct 02103 the problem should be performed on that computer. 02103 The server you specified does not exist. 02103 02103 ACTION 02103 02103 You may have misspelled the server's computer name. To see a list of servers in 02103 your domain, type: 02103 02103 NET VIEW 02103 02103 Remember to precede computer names with two backslashes, as in \\computername. 02103 02104 An internal error occurred. The network cannot access a shared memory segment. 02104 EXPLANATION 02104 An internal error occurred. 02104 02104 ACTION 02104 02104 Contact technical support. 02104 02105 A network resource shortage occurred . 02105 EXPLANATION 02105 02105 The network hardware could not access the resources it 02105 needed. 02105 02105 ACTION 02105 02105 Try the command again later. 02105 02106 This operation is not supported on workstations. 02106 EXPLANATION 02106 02106 This operation can be performed only on a server. 02106 02106 ACTION 02106 02106 See your network administrator if you need more information. 02106 02107 The device is not connected. 02107 EXPLANATION 02107 02107 This message should occur only on a down-level computer. Any action to correct 02107 the problem should be performed on that computer. 02107 This device name is not assigned to a shared resource. 02107 02107 ACTION 02107 02107 Check the spelling of the device name first. 02107 02107 To see which local device names are assigned to shared resources, type: 02107 02107 NET USE 02107 02114 The Server service is not started. 02114 EXPLANATION 02114 02114 The specified server is not started. The server must be started before you can 02114 run this command. 02114 02114 ACTION 02114 02114 Use the Services option in Computer Management System Tools to start the Server 02114 service. Try the command again after the server has been started. If you need 02114 assistance, contact your network administrator. 02114 02115 The queue is empty. 02115 EXPLANATION 02115 02115 If you do not see your document listed, it has either completed printing, or 02115 the printer did not receive your document. 02115 02115 ACTION 02115 02115 No action is needed. 02115 02116 The device or directory does not exist. 02116 EXPLANATION 02116 02116 You specified an unknown device or directory. 02116 02116 ACTION 02116 02116 Check the spelling of the device or directory name. 02116 02116 02117 The operation is invalid on a redirected resource. 02117 EXPLANATION 02117 02117 This message should occur only on a down-level computer. Any action to correct 02117 the problem should be performed on that computer. 02117 The device name you specified is assigned to a shared resource. 02117 02117 ACTION 02117 02117 To perform this operation on this device name, you first must end its 02117 connection to the shared resource. 02117 02118 The name has already been shared. 02118 EXPLANATION 02118 02118 This share name is already in use on this server. 02118 02118 ACTION 02118 02118 Choose a share name that is not currently used on this server. To see a list of 02118 resources currently shared on this server, type: 02118 02118 NET SHARE 02118 02119 The server is currently out of the requested resource. 02119 EXPLANATION 02119 02119 The server could not access enough of a resource, such as memory, to complete 02119 this task. 02119 02119 ACTION 02119 02119 Try again later. If you continue to receive this message, stop some 02119 nonessential processes or applications and try to complete the task again. If 02119 you still have problems, your network administrator may need to reconfigure 02119 your system. 02119 02121 Requested addition of items exceeds the maximum allowed. 02121 EXPLANATION 02121 02121 The list of items in the command is too long. 02121 02121 ACTION 02121 02121 If your command included a list of items, split the list into two smaller 02121 lists. Type the command with the first list, and then again with the second 02121 list. 02121 02121 02122 The Peer service supports only two simultaneous users. 02122 EXPLANATION 02122 02122 This message should occur only on a down-level computer. Any action to correct 02122 the problem should be performed on that computer. 02122 On a workstation running the Peer service, only you and one other user can have 02122 connections to a shared resource at the same time. 02122 02122 ACTION 02122 02122 Retype the command, specifying two as the maximum number of users for the 02122 resource. 02122 02123 The API return buffer is too small. 02123 EXPLANATION 02123 02123 The program you are running created a buffer that is too 02123 small for the data being used. 02123 02123 ACTION 02123 02123 The program should correct this problem. If it does not, see your network 02123 administrator or the vendor who supplied the program. 02123 02127 A remote API error occurred. 02127 EXPLANATION 02127 02127 This message should occur only on a down-level computer. Any action to correct 02127 the problem should be performed on that computer. 02127 The program or command you were running on a server could not be completed. 02127 There may be communication problems on the network, or the remote server may be 02127 short of resources. 02127 02127 ACTION 02127 02127 Contact your network administrator. Your administrator 02127 should make sure that the server is configured with enough resources. 02127 Specifically, the NUMBIGBUF entry in the server's configuration file may need 02127 to be increased. 02127 02131 An error occurred when opening or reading the configuration file. 02131 EXPLANATION 02131 02131 This message should occur only on a down-level computer. Any action to correct 02131 the problem should be performed on that computer. 02131 The configuration file is missing or contains invalid 02131 information. 02131 02131 ACTION 02131 02131 Ask your network administrator to review the contents of the configuration 02131 file. 02131 02136 A general network error occurred. 02136 EXPLANATION 02136 02136 A general failure occurred in the network hardware. This problem may be due to 02136 a hardware conflict and could have been generated by any number of other Server 02136 service commands (for example, Replicator). 02136 02136 ACTION 02136 02136 See your network administrator. The problem could have occurred because of the 02136 hardware or software installed on your computer. 02136 02137 The Workstation service is in an inconsistent state. Restart the computer 02137 before restarting the Workstation service. 02137 EXPLANATION 02137 02137 The workstation is in an inconsistent state. 02137 02137 ACTION 02137 02137 Restart the computer. 02137 02138 The Workstation service has not been started. 02138 EXPLANATION 02138 02138 You have tried to use the network before starting the 02138 Workstation service. 02138 02138 ACTION 02138 02138 Start the Workstation service by typing: 02138 02138 NET START WORKSTATION 02138 02139 The requested information is not available. 02139 EXPLANATION 02139 02139 This message should occur only on a down-level computer. Any action to correct 02139 the problem should be performed on that computer. 02139 Your command could not be completed because the MAILSLOTS entry of your 02139 workstation's configuration file is incorrect. 02139 02139 ACTION 02139 02139 Change the MAILSLOTS entry of the configuration file to YES. Then stop and 02139 restart the Workstation service. 02139 02140 An internal Windows 2000 error occurred. 02140 EXPLANATION 02140 02140 A software error occurred. 02140 02140 ACTION 02140 02140 Contact technical support. 02140 02141 The server is not configured for transactions. 02141 EXPLANATION 02141 02141 The specified server is not configured to accept the command you typed. 02141 02141 ACTION 02141 02141 Ask your network administrator if the server is configured properly. The 02141 administrator may choose to share the server's IPC$ resource to correct this 02141 problem. 02141 02142 The requested API is not supported on the remote server. 02142 EXPLANATION 02142 02142 The server does not support the request that was sent to it. This can happen if 02142 two or more versions of networking software are on the network. However, no 02142 program included with Windows NT should cause this error. 02142 02142 ACTION 02142 02142 Contact the vendor of the program that was running when the 02142 error occurred. 02142 02143 The event name is invalid. 02143 EXPLANATION 02143 02143 This message should occur only on a down-level computer. Any action to correct 02143 the problem should be performed on that computer. 02143 A software error occurred. 02143 02143 ACTION 02143 02143 Contact technical support. 02143 02144 The computer name already exists on the network. Change it and restart the 02144 computer. 02144 EXPLANATION 02144 02144 The computer name already exists on the network. 02144 02144 ACTION 02144 02144 Change the computer name and restart the computer before restarting 02144 the Workstation service. 02144 02146 The specified component could not be found in the configuration information. 02146 EXPLANATION 02146 02146 Windows NT could not find the required information in your 02146 configuration. 02146 02146 ACTION 02146 02146 Ask your network administrator to check your configuration. 02146 The administrator should make sure your system configuration contains 02146 all information required to run Windows NT and any associated applications. 02146 02147 The specified parameter could not be found in the configuration information. 02147 EXPLANATION 02147 02147 Windows NT could not find a particular entry in your 02147 configuration. 02147 02147 ACTION 02147 02147 Ask your network administrator to check your configuration. 02147 The administrator should make sure your system configuration contains 02147 all information required to run Windows NT and any 02147 associated applications. 02147 02149 A line in the configuration file is too long. 02149 EXPLANATION 02149 02149 This message should occur only on a down-level computer. Any action to correct 02149 the problem should be performed on that computer. 02149 A line in the configuration file is too long. 02149 02149 ACTION 02149 02149 Edit the configuration file. 02149 02150 The printer does not exist. 02150 EXPLANATION 02150 02150 The printer you have specified is invalid. 02150 02150 ACTION 02150 02150 Check the spelling of the printer name. 02150 02150 To see the list of printers shared on this server, type: 02150 02150 NET VIEW \\computername 02150 02151 The print job does not exist. 02151 EXPLANATION 02151 02151 There is no print job matching the print job identification number you typed. 02151 02151 ACTION 02151 02151 Be sure you typed the correct print job identification 02151 number. To see a list of current print jobs, type: 02151 02151 NET PRINT \\computername\sharename 02151 02152 The printer destination cannot be found. 02152 EXPLANATION 02152 02152 This message should occur only on a down-level computer. Any action to correct 02152 the problem should be performed on that computer. 02152 This printer is not used by a printer queue. 02152 02152 ACTION 02152 02152 Check the spelling of the printer name and then retype the command. 02152 02153 The printer destination already exists. 02153 EXPLANATION 02153 02153 This message should occur only on a down-level computer. Any action to correct 02153 the problem should be performed on that computer. 02153 This printer has already been installed. 02153 02153 ACTION 02153 02153 Be sure you typed the correct device name. 02153 02154 The printer queue already exists. 02154 EXPLANATION 02154 02154 This message should occur only on a down-level computer. Any action to correct 02154 the problem should be performed on that computer. 02154 You tried to create a printer queue with a name that is 02154 already in use on this server. 02154 02154 ACTION 02154 02154 Give the new queue a different name. To see a list of printer queues already 02154 existing on the server, type: 02154 02154 NET PRINT 02154 02155 No more printers can be added. 02155 EXPLANATION 02155 02155 This message should occur only on a down-level computer. Any action to correct 02155 the problem should be performed on that computer. 02155 The server does not have enough memory available to add another printer queue. 02155 02155 ACTION 02155 02155 To free memory, delete an existing printer queue. Then create and share the new 02155 queue. 02155 02155 You can also reconfigure the server to allow more printer queues by increasing 02155 the value of the MAXQUEUES entry in the server's configuration file. 02155 This entry defines the maximum number of queues the server can share. 02155 After you edit the configuration file, stop and start the server's spooler for 02155 the changes to take effect. 02155 02156 No more print jobs can be added. 02156 EXPLANATION 02156 02156 This message should occur only on a down-level computer. Any action to correct 02156 the problem should be performed on that computer. 02156 The server does not have enough memory available to add another print job. 02156 02156 ACTION 02156 02156 Wait a while, then send the print job again. 02156 02156 If the problem persists, you may want to contact your network administrator 02156 about changing the MAXJOBS entry 02156 in the server's configuration file. This entry defines the maximum number of 02156 print jobs allowed on the server at one time. 02156 02156 If the configuration file is changed, you must stop and restart the server's 02156 spooler for the changes to take effect. 02156 02157 No more printer destinations can be added. 02157 EXPLANATION 02157 02157 This message should occur only on a down-level computer. Any action to correct 02157 the problem should be performed on that computer. 02157 The server does not have enough memory available to add another printer. 02157 02157 ACTION 02157 02157 Change the MAXPRINTERS entry in the server's configuration file. This entry 02157 defines the maximum number of printers the server can share. Then stop and 02157 restart the spooler for the changes to take effect. 02157 02158 This printer destination is idle and cannot accept control operations. 02158 EXPLANATION 02158 02158 This message should occur only on a down-level computer. Any action to correct 02158 the problem should be performed on that computer. 02158 The specified printer is not in use. 02158 02158 ACTION 02158 02158 Be sure you are referring to the correct printer. 02158 02159 This printer destination request contains an invalid control function. 02159 EXPLANATION 02159 02159 This message should occur only on a down-level computer. Any action to correct 02159 the problem should be performed on that computer. 02159 An internal control function is invalid. 02159 02159 ACTION 02159 02159 Contact technical support. 02159 02160 The print processor is not responding. 02160 EXPLANATION 02160 02160 This message should occur only on a down-level computer. Any action to correct 02160 the problem should be performed on that computer. 02160 The spooler is failing to communicate with the print 02160 processor. 02160 02160 ACTION 02160 02160 See your network administrator. There may be software 02160 problems with the print processor or hardware problems with 02160 the associated printer. 02160 02161 The spooler is not running. 02161 EXPLANATION 02161 02161 This message should occur only on a down-level computer. Any action to correct 02161 the problem should be performed on that computer. 02161 The spooler has not been started. 02161 02161 ACTION 02161 02161 Use the Print Manager to start the spooler. 02161 02162 This operation cannot be performed on the print destination in its current 02162 state. 02162 EXPLANATION 02162 02162 This message should occur only on a down-level computer. Any action to correct 02162 the problem should be performed on that computer. 02162 The requested change cannot be made because a software error occurred. 02162 02162 ACTION 02162 02162 Contact technical support. 02162 02163 This operation cannot be performed on the printer queue in its current state. 02163 EXPLANATION 02163 02163 This message should occur only on a down-level computer. Any action to correct 02163 the problem should be performed on that computer. 02163 The requested change cannot be made because a software error occurred. 02163 02163 ACTION 02163 02163 Contact technical support. 02163 02164 This operation cannot be performed on the print job in its current state. 02164 EXPLANATION 02164 02164 This message should occur only on a down-level computer. Any action to correct 02164 the problem should be performed on that computer. 02164 The requested change cannot be made because a software error occurred. 02164 02164 ACTION 02164 02164 Contact technical support. 02164 02165 A spooler memory allocation failure occurred. 02165 EXPLANATION 02165 02165 This message should occur only on a down-level computer. Any action to correct 02165 the problem should be performed on that computer. 02165 The spooler ran out of memory. 02165 02165 ACTION 02165 02165 To free memory for the spooler, delete one or more printer queues or print 02165 jobs, or remove one or more printers from all print queues on the server. 02165 02166 The device driver does not exist. 02166 EXPLANATION 02166 02166 This message should occur only on a down-level computer. Any action to correct 02166 the problem should be performed on that computer. 02166 The device driver you specified has not been installed for the printer queue. 02166 02166 ACTION 02166 02166 Check the spelling of the name of the device driver. 02166 02166 To use a new device driver with this printer queue, you must first use Control 02166 Panel to install the device driver. For more information about Control Panel, 02166 see your operating system manual(s). 02166 02167 The data type is not supported by the print processor. 02167 EXPLANATION 02167 02167 This message should occur only on a down-level computer. Any action to correct 02167 the problem should be performed on that computer. 02167 The data type of the print job is not supported by the queue's print processor. 02167 02167 ACTION 02167 02167 Use a different print processor for jobs that have this data type, or rewrite 02167 the application so that it uses a data type the print processor can recognize. 02167 02168 The print processor is not installed. 02168 EXPLANATION 02168 02168 This message should occur only on a down-level computer. Any action to correct 02168 the problem should be performed on that computer. 02168 The print processor you specified has not been installed on the server. 02168 02168 ACTION 02168 02168 Use Control Panel to install a print processor. 02168 For more information about the Control Panel, see your operating system 02168 manual(s). 02168 02180 The service database is locked. 02180 EXPLANATION 02180 02180 Another program is holding the service database lock. 02180 02180 ACTION 02180 02180 Wait for the lock to be released and try again later. If it is possible to 02180 determine which program is holding the lock, then end that program. 02180 02181 The service table is full. 02181 EXPLANATION 02181 02181 This message should occur only on a down-level computer. Any action to correct 02181 the problem should be performed on that computer. 02181 You cannot start another service because you have reached the maximum number of 02181 services specified in your configuration file. 02181 02181 ACTION 02181 02181 You can start another service if you first stop a nonessential one. To display 02181 the list of services that are running, type: 02181 02181 NET START 02181 02181 You could also change the maximum number of services allowed to run 02181 simultaneously on the computer by changing the value of the NUMSERVICES entry 02181 in the computer's configuration file. If you need assistance, contact your 02181 network administrator. 02181 02182 The requested service has already been started. 02182 EXPLANATION 02182 02182 You tried to start a service that is already running. 02182 02182 ACTION 02182 02182 To display a list of active services, type: 02182 02182 NET START 02182 02183 The service does not respond to control actions. 02183 EXPLANATION 02183 02183 This message should occur only on a down-level computer. Any action to correct 02183 the problem should be performed on that computer. 02183 A software error occurred. 02183 02183 ACTION 02183 02183 Contact technical support. 02183 02184 The service has not been started. 02184 EXPLANATION 02184 02184 You tried to use a service that is not running. 02184 02184 ACTION 02184 02184 To display a list of active services, type: 02184 02184 NET START 02184 02184 To start a service, type: 02184 02184 NET START service 02184 02185 The service name is invalid. 02185 EXPLANATION 02185 02185 You tried to start a service that is not configured on this system. 02185 02185 ACTION 02185 02185 Check the spelling of the service name or check the configuration information 02185 for the service using the Services option from Server Manager. 02185 02186 The service is not responding to the control function. 02186 EXPLANATION 02186 02186 The service cannot run your command at this time. 02186 02186 ACTION 02186 02186 Try the command again later. 02186 02186 If the problem persists, stop and restart the service. 02186 02186 However, if the problem continues after you have restarted the service, report 02186 the problem. Be sure to include the name of the service and the command that 02186 was refused, to technical support. 02186 02187 The service control is busy. 02187 EXPLANATION 02187 02187 The service is not responding to requests now. Another program may be 02187 controlling the service or there may be a software problem. 02187 02187 ACTION 02187 02187 Try to stop the service by typing: 02187 02187 NET STOP service 02187 02187 If this fails, stop all programs running on the computer 02187 and try typing the NET STOP command again. 02187 02187 If the problem persists, contact technical support. 02187 Be prepared to give the name of the service and other information about the 02187 system, such as the services and applications that were running on the 02187 computer, and the amount and type of network activity when the problem 02187 occurred. 02187 02188 The configuration file contains an invalid service program name. 02188 EXPLANATION 02188 02188 This message should occur only on a down-level computer. Any action to correct 02188 the problem should be performed on that computer. 02188 Your configuration file has associated a service with a nonexistent program 02188 file. 02188 02188 ACTION 02188 02188 Be sure that each entry shown in the [services] 02188 section of your configuration file lists a valid pathname 02188 for the service's executable file. If you need assistance, contact your 02188 network administrator. 02188 02189 The service could not be controlled in its present state. 02189 EXPLANATION 02189 02189 The service is not currently accepting requests. If 02189 the service is starting, it cannot process requests until it is fully started. 02189 02189 ACTION 02189 02189 Try the operation again in a minute or two. 02189 02189 If this problem persists, the service may be stuck in a partially running 02189 state. Contact technical support. Be prepared to give the name of the service 02189 and other information about the system, such as the services and applications 02189 that were running, and the type and amount of network activity on the computer 02189 at the time of the problem. 02189 02190 The service ended abnormally. 02190 EXPLANATION 02190 02190 This message should occur only on a down-level computer. Any action to correct 02190 the problem should be performed on that computer. 02190 The service was not running properly and would not respond to a command. The 02190 service was terminated. 02190 02190 ACTION 02190 02190 Stop the service by typing: 02190 02190 NET STOP service 02190 02190 Then restart the service by typing: 02190 02190 NET START service 02190 02190 If the problem occurs frequently, contact technical support. 02190 02191 The requested pause or stop is not valid for this service. 02191 EXPLANATION 02191 02191 This command is invalid for this service, or the service cannot accept the 02191 command right now. 02191 02191 ACTION 02191 02191 If the service normally accepts this command, try typing it 02191 again later. 02191 02191 To display a list of valid commands, type: 02191 02191 NET HELP 02191 02192 The service control dispatcher could not find the service name in the dispatch 02192 table. 02193 The service control dispatcher pipe read failed. 02194 A thread for the new service could not be created. 02200 This workstation is already logged on to the local-area network. 02200 EXPLANATION 02200 02200 This message should occur only on a down-level computer. Any action to correct 02200 the problem should be performed on that computer. 02200 A user is already logged on at this workstation. 02200 02200 ACTION 02200 02200 To see who is currently logged on at the workstation, type: 02200 02200 NET CONFIG WORKSTATION 02200 02201 The workstation is not logged on to the local-area network. 02202 The user name or group name parameter is invalid. 02202 EXPLANATION 02202 02202 You specified an invalid user name or group name. 02202 02202 ACTION 02202 02202 Use a different user name or group name. 02202 02203 The password parameter is invalid. 02203 EXPLANATION 02203 02203 You specified an invalid password. 02203 02203 ACTION 02203 02203 Use a valid password. 02203 02204 The logon processor did not add the message alias. 02204 EXPLANATION 02204 02204 This message should occur only on a down-level computer. Any action to correct 02204 the problem should be performed on that computer. 02204 Your user name was not added as a new message alias for one of the following 02204 reasons: 02204 02204 - The Messenger service is not started on your workstation. 02204 02204 - Your user name and your workstation's computer name are the 02204 same, and your workstation's computer name is already a 02204 message alias. 02204 02204 - Your user name is in use as a message alias on another 02204 computer on the network. In this case, you cannot 02204 receive messages at the local workstation using this name. 02204 02204 ACTION 02204 02204 Start the Messenger service on your workstation if it is not already started. 02204 Then use the NET NAME command to add your user name as a message alias. 02204 02204 If your user name is being used as a message alias on another computer, delete 02204 the alias on that computer. Then use the NET NAME command to add your user name 02204 as a message alias on this computer. 02204 02205 The logon processor did not add the message alias. 02205 EXPLANATION 02205 02205 This message should occur only on a down-level computer. Any action to correct 02205 the problem should be performed on that computer. 02205 Your user name is already established as a message 02205 alias. Either your user name and computer name are the same, or your user name 02205 is in use as a message alias on another computer on the network. 02205 If your user name is being used as a message alias on another computer, you 02205 cannot receive messages at the loca 02205 l workstation using this name. 02205 02205 ACTION 02205 02205 If your user name is being used as a message alias on another computer, delete 02205 the alias on that computer. Then log on again at this computer. 02205 02206 The logoff processor did not delete the message alias. 02206 EXPLANATION 02206 02206 This message should occur only on a down-level computer. Any action to correct 02206 the problem should be performed on that computer. 02206 The message alias corresponding to your user name was not 02206 deleted. Either your user name is the same as the computer name, or your user 02206 name is being used as a message alias on some other network computer. 02206 02206 ACTION 02206 02206 No action is needed. 02206 02207 The logoff processor did not delete the message alias. 02207 EXPLANATION 02207 02207 This message should occur only on a down-level computer. Any action to correct 02207 the problem should be performed on that computer. 02207 The message alias corresponding to your user name was not 02207 deleted because your user name is the same as the computer name. 02207 02207 ACTION 02207 02207 No action is needed. 02207 02209 Network logons are paused. 02209 EXPLANATION 02209 02209 This message should occur only on a down-level computer. Any action to correct 02209 the problem should be performed on that computer. 02209 An administrator has paused the Netlogon service. No one can log on until the 02209 Netlogon service is continued. 02209 02209 ACTION 02209 02209 The administrator must continue the Netlogon service by typing: 02209 02209 NET CONTINUE NETLOGON 02209 02210 A centralized logon-server conflict occurred. 02210 EXPLANATION 02210 02210 You can't start the Netlogon service on this server because a server in the 02210 domain with an earlier version the software is running the Netlogon service. 02210 02210 ACTION 02210 02210 Before you can start the Netlogon service on this server, you must stop the 02210 Netlogon service on all servers in the domain running earlier versions of the 02210 software. 02210 02210 02211 The server is configured without a valid user path. 02212 An error occurred while loading or running the logon script. 02212 EXPLANATION 02212 02212 This message should occur only on a down-level computer. Any action to correct 02212 the problem should be performed on that computer. 02212 The logon script for your account may contain unrecognized commands or commands 02212 that could not run. 02212 02212 ACTION 02212 02212 Ask your network administrator to review your logon script. 02212 02214 The logon server was not specified. Your computer will be logged on as 02214 STANDALONE. 02214 EXPLANATION 02214 02214 This message should occur only on a down-level computer. Any action to correct 02214 the problem should be performed on that computer. 02214 The logon was not validated by a logon server. 02214 02214 ACTION 02214 02214 No action is needed. 02214 02215 The logon server could not be found. 02215 EXPLANATION 02215 02215 This message should occur only on a down-level computer. Any action to correct 02215 the problem should be performed on that computer. 02215 No domain controller is responding to your command. 02215 02215 ACTION 02215 02215 See your network administrator. 02215 02216 There is already a logon domain for this computer. 02216 EXPLANATION 02216 02216 This message should occur only on a down-level computer. Any action to correct 02216 the problem should be performed on that computer. 02216 This workstation already has a logon domain established. 02216 02216 ACTION 02216 02216 To log on in a different domain, you must first log off from the current domain 02216 and then log on again to a different domain. 02216 02217 The logon server could not validate the logon. 02217 EXPLANATION 02217 02217 This message should occur only on a down-level computer. Any action to correct 02217 the problem should be performed on that computer. 02217 Your logon server is running an earlier version of LAN Manager. 02217 02217 ACTION 02217 02217 No action is needed. 02217 02219 The security database could not be found. 02219 EXPLANATION 02219 02219 Windows NT could not find the security database file. 02219 02219 ACTION 02219 02219 Copy the backup version of the file. 02219 02219 02220 The group name could not be found. 02220 EXPLANATION 02220 02220 You specified an unknown group name. 02220 02220 ACTION 02220 02220 Check the spelling of the group name. To display a list of the groups in the 02220 security database, type: 02220 02220 NET GROUP 02220 02221 The user name could not be found. 02221 EXPLANATION 02221 02221 You specified an unknown user name. 02221 02221 ACTION 02221 02221 Check the spelling of the user name. To display 02221 a list of the users in the security database, type: 02221 02221 NET USER 02221 02222 The resource name could not be found. 02222 EXPLANATION 02222 02222 You tried to access the permissions for a resource that has no permissions 02222 assigned to it. 02222 02222 ACTION 02222 02222 Check the spelling of the resource's name. 02222 02222 Before you can assign user permissions for a particular resource, you must 02222 create a record of that resource in the database of resource permissions. 02222 02222 02223 The group already exists. 02223 EXPLANATION 02223 02223 You tried to create a group with a group name that already exists. 02223 02223 ACTION 02223 02223 Use a different group name for the new group. To display 02223 a list of group names established on the server, type: 02223 02223 NET GROUP 02223 02224 The account already exists. 02224 EXPLANATION 02224 02224 You tried to create a user account with a user name that already exists. 02224 02224 ACTION 02224 02224 Use a different user name for the new user account. 02224 To display a list of existing user names, type: 02224 02224 NET USER 02224 02225 The resource permission list already exists. 02225 EXPLANATION 02225 02225 This message should occur only on a down-level computer. Any action to correct 02225 the problem should be performed on that computer. 02225 You tried to create an access record for a resource that already has one. 02225 02225 ACTION 02225 02225 To view or change permissions for this resource, use the Permissions editor 02225 from the File Manager. 02225 02226 This operation is only allowed on the primary domain controller of the domain. 02226 EXPLANATION 02226 02226 The specified server is not the domain controller, so you cannot update its 02226 security database. 02226 02226 ACTION 02226 02226 Run the command on the domain controller. If you are using User Manager, set 02226 the focus on the domain controller, and then retry the command. 02226 02227 The security database has not been started. 02227 EXPLANATION 02227 02227 The security database is not active. This database must be active for the 02227 command to run. 02227 02227 ACTION 02227 02227 The security database should have started when the Workstation service started. 02227 Check the error log with Event Viewer to determine why the database did not 02227 start. 02227 02228 There are too many names in the user accounts database. 02228 EXPLANATION 02228 02228 This message should occur only on a down-level computer. Any action to correct 02228 the problem should be performed on that computer. 02228 The user accounts database is full. 02228 02228 ACTION 02228 02228 Make space in the database by deleting users, groups, and resource permissions. 02228 02229 A disk I/O failure occurred. 02229 EXPLANATION 02229 02229 A software error occurred while Windows NT tried to access a down-level 02229 security database file. 02229 02229 ACTION 02229 02229 Type the command again. If the error persists, use a backup copy of the 02229 security database from a server and try the command again. If the error 02229 persists, your disk drive may have hardware problems. 02229 02230 The limit of 64 entries per resource was exceeded. 02230 EXPLANATION 02230 02230 This message should occur only on a down-level computer. Any action to correct 02230 the problem should be performed on that computer. 02230 Each resource can have no more than 64 access records defined. 02230 02230 ACTION 02230 02230 Put the users into groups and specify permissions for the groups, rather than 02230 for each user. 02230 02231 Deleting a user with a session is not allowed. 02231 EXPLANATION 02231 02231 This message should occur only on a down-level computer. Any action to correct 02231 the problem should be performed on that computer. 02231 The user currently has a session with the server. 02231 02231 ACTION 02231 02231 The session must be ended before you can delete a user. 02231 02232 The parent directory could not be located. 02232 EXPLANATION 02232 02232 This message should occur only on a down-level computer. Any action to correct 02232 the problem should be performed on that computer. 02232 No permissions have been assigned for the parent directory. 02232 02232 ACTION 02232 02232 Your network administrator must assign permissions for this resource. 02232 02233 Unable to add to the security database session cache segment. 02233 EXPLANATION 02233 02233 The security database has reached its size limit. Nothing can be added to it. 02233 02233 ACTION 02233 02233 No action is needed. 02233 02234 This operation is not allowed on this special group. 02234 EXPLANATION 02234 02234 You cannot perform this task on special groups such as Users, Administrators 02234 and Guests. 02234 02234 ACTION 02234 02234 No action is needed. 02234 02235 This user is not cached in user accounts database session cache. 02235 EXPLANATION 02235 02235 This message should occur only on a down-level computer. Any action to correct 02235 the problem should be performed on that computer. 02235 A software error occurred. 02235 02235 ACTION 02235 02235 Contact technical support. 02235 02236 The user already belongs to this group. 02236 EXPLANATION 02236 02236 The user you are trying to add to this group is already 02236 a member. 02236 02236 ACTION 02236 02236 No action is needed. 02236 02237 The user does not belong to this group. 02237 EXPLANATION 02237 02237 This user is not a member of this group. 02237 02237 ACTION 02237 02237 To see a list of users in this group, type: 02237 02237 NET GROUP groupname 02237 02238 This user account is undefined. 02238 EXPLANATION 02238 02238 This message should occur only on a down-level computer. Any action to correct 02238 the problem should be performed on that computer. 02238 A software error occurred. 02238 02238 ACTION 02238 02238 Contact technical support. 02238 02239 This user account has expired. 02239 EXPLANATION 02239 02239 Only an administrator can access an expired account. 02239 02239 ACTION 02239 02239 The administrator must reinstate this account before the action you specified 02239 can be taken. 02239 02240 The user is not allowed to log on from this workstation. 02240 EXPLANATION 02240 02240 You are not allowed to log on from this workstation. 02240 02240 ACTION 02240 02240 If you need to log on from this workstation, have your network administrator 02240 change the logon workstation(s) listed in your account. 02240 02241 The user is not allowed to log on at this time. 02241 EXPLANATION 02241 02241 You are not allowed to log on at this time of day. 02241 02241 ACTION 02241 02241 If you need to log on, have your network administrator change the logon hours 02241 listed in your account. 02241 02242 The password of this user has expired. 02242 EXPLANATION 02242 02242 Your password has expired. You will not be able to perform any network tasks 02242 until you change your password. 02242 02242 ACTION 02242 02242 To change your password, press Ctrl+Alt+Del and then select Change Password. 02242 02243 The password of this user cannot change. 02243 EXPLANATION 02243 02243 This message should occur only on a down-level computer. Any action to correct 02243 the problem should be performed on that computer. 02243 You cannot change your password. 02243 02243 ACTION 02243 02243 See your network administrator if you want your password changed. 02243 02244 This password cannot be used now. 02244 EXPLANATION 02244 02244 This message should occur only on a down-level computer. Any action to correct 02244 the problem should be performed on that computer. 02244 You cannot use a password that has just expired. Your network administrator may 02244 also have configured your account so that you cannot use any of your previous 02244 passwords. 02244 02244 ACTION 02244 02244 Change your password to one that you have not used before. 02244 02245 The password does not meet the password policy requirements. Check the minimum 02245 password length, password complexity and password history requirements. 02245 EXPLANATION 02245 02245 The password you specified is not long enough. 02245 02245 ACTION 02245 02245 Use a longer password. See your network administrator to find the required 02245 length for passwords on your system. 02245 02245 02246 The password of this user is too recent to change. 02246 EXPLANATION 02246 02246 You cannot change your password again for a certain length of time. 02246 02246 ACTION 02246 02246 No action is needed. See your network administrator to find the length of time 02246 that you must use your current password. 02246 02247 The security database is corrupted. 02247 EXPLANATION 02247 02247 The security database is damaged. 02247 02247 ACTION 02247 02247 Restore the security database from a backup. 02247 02247 02248 No updates are necessary to this replicant network/local security database. 02248 EXPLANATION 02248 02248 This message should occur only on a down-level computer. Any action to correct 02248 the problem should be performed on that computer. 02248 A server requested an update of the user accounts database, even though no 02248 update was required. 02248 02248 ACTION 02248 02248 No action is needed. 02248 02249 This replicant database is outdated; synchronization is required. 02249 EXPLANATION 02249 02249 The local server's security database is completely out of synchronization with 02249 that of the domain controller, so a complete synchronization is needed. 02249 02249 ACTION 02249 02249 Use the Synchronize With Domain option in Server Manager to synchronize the 02249 local server's database with that of the domain controller. 02249 02250 The network connection could not be found. 02250 EXPLANATION 02250 02250 This network connection does not exist. 02250 02250 ACTION 02250 02250 To display a list of shared resources to which your computer 02250 is connected, type: 02250 02250 NET USE 02250 02251 This asg_type is invalid. 02251 EXPLANATION 02251 02251 A software error occurred. 02251 02251 ACTION 02251 02251 Contact technical support. 02251 02252 This device is currently being shared. 02252 EXPLANATION 02252 02252 This message should occur only on a down-level computer. Any action to correct 02252 the problem should be performed on that computer. 02252 The device name you have tried to assign to a shared resource represents a 02252 local device that is already being shared. 02252 02252 ACTION 02252 02252 Select another device name or stop sharing the device you specified. 02252 02270 The computer name could not be added as a message alias. The name may already 02270 exist on the network. 02270 EXPLANATION 02270 02270 A software error occurred. 02270 02270 ACTION 02270 02270 Contact technical support. 02270 02271 The Messenger service is already started. 02271 EXPLANATION 02271 02271 This message should occur only on a down-level computer. Any action to correct 02271 the problem should be performed on that computer. 02271 You tried to start the Messenger service, but it is already running. 02271 02271 ACTION 02271 02271 No action is needed. If this error occurs often, contact technical support. 02271 02272 The Messenger service failed to start. 02272 EXPLANATION 02272 02272 This message should occur only on a down-level computer. Any action to correct 02272 the problem should be performed on that computer. 02272 The initialization sequence of the Messenger service failed, 02272 so the service could not start. 02272 02272 ACTION 02272 02272 Check the error log for error messages related to the 02272 Messenger service failing to start. This problem may be 02272 caused by the way your workstation or server is configured, 02272 or by hardware or software errors. 02272 02273 The message alias could not be found on the network. 02273 EXPLANATION 02273 02273 This message alias could not be located. 02273 02273 ACTION 02273 02273 Check the spelling of the message alias. If it is correct, then the computer 02273 that is to receive your message may be busy. Try sending the message again 02273 later. 02273 02274 This message alias has already been forwarded. 02275 This message alias has been added but is still forwarded. 02275 EXPLANATION 02275 02275 This message should occur only on a down-level computer. Any action to correct 02275 the problem should be performed on that computer. 02275 Messages for this alias are being forwarded to another computer. 02275 02275 ACTION 02275 02275 Stop forwarding messages and allow messages to be 02275 received by the local computer again. 02275 02276 This message alias already exists locally. 02276 EXPLANATION 02276 02276 You tried to add a message alias that already exists on this computer. 02276 02276 ACTION 02276 02276 Use a different name if you want to add a new message alias. 02276 02276 To display the list of aliases on this computer, type 02276 02276 NET NAME 02276 02277 The maximum number of added message aliases has been exceeded. 02277 EXPLANATION 02277 02277 The maximum number of message aliases on each computer is 02277 limited by the system hardware. You have reached this limit. 02277 02277 This limit also affects the number of other domains you can specify with the 02277 OTHDOMAINS option of the NET CONFIG WORKSTATION command. 02277 02277 ACTION 02277 02277 To find the limit for your system, see your hardware documentation or ask your 02277 administrator. 02277 02277 To display a list of current message aliases, type: 02277 02277 NET NAME 02277 02277 To delete a message alias to make room for a new message alias or another 02277 domain specified by the OTHDOMAINS option, type: 02277 02277 NET NAME alias /DELETE 02277 02278 The computer name could not be deleted. 02278 EXPLANATION 02278 02278 You cannot delete a message alias that is also a computer name. 02278 02278 ACTION 02278 02278 No action is needed. 02278 02279 Messages cannot be forwarded back to the same workstation. 02279 EXPLANATION 02279 02279 This message should occur only on a down-level computer. Any action to correct 02279 the problem should be performed on that computer. 02279 You cannot forward a message to yourself at your own 02279 workstation. 02279 02279 ACTION 02279 02279 No action is needed. 02279 02280 An error occurred in the domain message processor. 02280 EXPLANATION 02280 02280 An error occurred when the workstation was receiving or processing a 02280 domain-wide message. 02280 02280 ACTION 02280 02280 Check the workstation's Event log, by selecting System from the Log menu using 02280 Event Viewer. Stop and restart the Messenger service. 02280 02280 If the problem persists, contact technical support. 02280 02281 The message was sent, but the recipient has paused the Messenger service. 02281 EXPLANATION 02281 02281 The person receiving your message has paused the Messenger service, so your 02281 message could not be received. 02281 02281 ACTION 02281 02281 Send your message again later. If the error persists, see your network 02281 administrator. 02281 02282 The message was sent but not received. 02282 EXPLANATION 02282 02282 The remote workstation was unable to receive your message. The Workstation or 02282 Messenger service may not be running on that workstation, it may have been 02282 receiving another message as yours arrived, or its message buffer may be too 02282 small. 02282 02282 ACTION 02282 02282 Send your message again later. If the error persists, see your network 02282 administrator. 02282 02283 The message alias is currently in use. Try again later. 02283 EXPLANATION 02283 02283 The computer to which you tried to send a message was receiving another 02283 message. A computer can receive only one message at a time. 02283 02283 ACTION 02283 02283 Send the message again later. 02283 02284 The Messenger service has not been started. 02284 EXPLANATION 02284 02284 This message should occur only on a down-level computer. Any action to correct 02284 the problem should be performed on that computer. 02284 The Messenger service must be running for you to use this command. 02284 02284 ACTION 02284 02284 To start the Messenger service, type: 02284 02284 NET START MESSENGER 02284 02285 The name is not on the local computer. 02285 EXPLANATION 02285 02285 You tried to delete a message alias that is not on 02285 your computer. 02285 02285 ACTION 02285 02285 To display a list of aliases on your computer and to check the spelling of the 02285 aliases, type: 02285 02285 NET NAME 02285 02286 The forwarded message alias could not be found on the network. 02286 EXPLANATION 02286 02286 This message should occur only on a down-level computer. Any action to correct 02286 the problem should be performed on that computer. 02286 This alias no longer exists on the workstation that was receiving the alias's 02286 forwarded messages. The alias may have been deleted at that workstation, or the 02286 workstation may have been restarted. 02286 02286 ACTION 02286 02286 Restart the workstation or add the alias to the workstation again. 02286 02287 The message alias table on the remote station is full. 02287 EXPLANATION 02287 02287 This message should occur only on a down-level computer. Any action to correct 02287 the problem should be performed on that computer. 02287 The workstation to which you are trying to forward the 02287 message alias has no room for new aliases. 02287 02287 ACTION 02287 02287 Ask the user on that workstation if an existing alias can be deleted so yours 02287 can be added, or forward your alias to a different workstation. 02287 02288 Messages for this alias are not currently being forwarded. 02288 EXPLANATION 02288 02288 This message should occur only on a down-level computer. Any action to correct 02288 the problem should be performed on that computer. 02288 Messages for this alias are not being forwarded. 02288 02288 ACTION 02288 02288 No action is needed. 02288 02289 The broadcast message was truncated. 02289 EXPLANATION 02289 02289 The broadcast message was too long. Only the first 128 characters of the 02289 message were sent. 02289 02289 ACTION 02289 02289 Keep broadcast messages to 128 characters or less. 02289 02294 This is an invalid device name. 02294 EXPLANATION 02294 02294 You typed a command or ran a program that specified an invalid device name. 02294 02294 ACTION 02294 02294 If you specified the device name, be sure that it is valid and that you have 02294 typed it correctly. 02294 02294 If a program specified the device name, consult the 02294 program's documentation. 02294 02295 A write fault occurred. 02295 EXPLANATION 02295 02295 This message should occur only on a down-level computer. Any action to correct 02295 the problem should be performed on that computer. 02295 LAN Manager found an error when writing to the message log file. 02295 02295 ACTION 02295 02295 Contact your network administrator. 02295 02297 A duplicate message alias exists on the network. 02297 EXPLANATION 02297 02297 The name you specified is already in use as a message alias on the network. 02297 02297 ACTION 02297 02297 Use a different name. 02297 02298 This message alias will be deleted later. 02298 EXPLANATION 02298 02298 Some hardware configurations have a delay between the typing of a command and 02298 the deletion of an alias. 02298 02298 ACTION 02298 02298 No action is needed. The deletion will occur soon. 02298 02299 The message alias was not successfully deleted from all networks. 02299 EXPLANATION 02299 02299 The message alias could not be deleted from all networks of which this computer 02299 is a member. This should cause no problems. 02299 02299 ACTION 02299 02299 If this error occurs frequently, contact technical support. 02299 02300 This operation is not supported on computers with multiple networks. 02300 EXPLANATION 02300 02300 This message should occur only on a down-level computer. Any action to correct 02300 the problem should be performed on that computer. 02300 You cannot run this command on a computer that is on multiple networks. 02300 02300 ACTION 02300 02300 No action is needed. 02300 02310 This shared resource does not exist. 02310 EXPLANATION 02310 02310 The share name you specified does not exist. 02310 02310 ACTION 02310 02310 Check the spelling of the share name. 02310 02310 To display a list of resources shared on the server, type: 02310 02310 NET SHARE 02310 02311 This device is not shared. 02311 EXPLANATION 02311 02311 The device you specified is not shared. 02311 02311 ACTION 02311 02311 Check the spelling of the device name. 02311 02311 To share the device, type: 02311 02311 NET SHARE sharename=devicename 02311 02312 A session does not exist with that computer name. 02312 EXPLANATION 02312 02312 The specified computer does not have a session with the server. 02312 02312 ACTION 02312 02312 Check the spelling of the computer name. 02312 02312 To display a list of workstations and users that have sessions with the server, 02312 type: 02312 02312 NET SESSION 02312 02314 There is not an open file with that identification number. 02314 EXPLANATION 02314 02314 This message should occur only on a down-level computer. Any action to correct 02314 the problem should be performed on that computer. 02314 There is no open file on the server corresponding to the number you specified. 02314 02314 ACTION 02314 02314 Check the identification number of the open file. To display a list of open 02314 files and their identification numbers, type: 02314 02314 NET FILE 02314 02315 A failure occurred when executing a remote administration command. 02315 EXPLANATION 02315 02315 This message should occur only on a down-level computer. Any action to correct 02315 the problem should be performed on that computer. 02315 The command cannot run on the remote server, probably 02315 because of a problem with the server's operating system configuration. 02315 02315 ACTION 02315 02315 Have your network administrator check the configuration of the server's 02315 operating system. 02315 02316 A failure occurred when opening a remote temporary file. 02316 EXPLANATION 02316 02316 This message should occur only on a down-level computer. Any action to correct 02316 the problem should be performed on that computer. 02316 The command could not be completed because it could not open a temporary file 02316 on the server. 02316 02316 ACTION 02316 02316 See your network administrator. If you need further help, contact technical 02316 support. 02316 02317 The data returned from a remote administration command has been truncated to 02317 64K. 02317 NET2317 02318 This device cannot be shared as both a spooled and a non-spooled resource. 02318 EXPLANATION 02318 02318 This message should occur only on a down-level computer. Any action to correct 02318 the problem should be performed on that computer. 02318 You cannot route requests from both a printer queue and a communication-device 02318 queue to the same device. 02318 02318 ACTION 02318 02318 To assign the device to a printer queue, you must first remove it from all 02318 communication-device queues. 02318 02318 To assign the device to a communication-device queue, you must remove it from 02318 all printer queues. 02318 02319 The information in the list of servers may be incorrect. 02319 EXPLANATION 02319 02319 This message should occur only on a down-level computer. Any action to correct 02319 the problem should be performed on that computer. 02319 A software error occurred. 02319 02319 ACTION 02319 02319 Contact technical support. 02319 02320 The computer is not active in this domain. 02320 EXPLANATION 02320 02320 This message should occur only on a down-level computer. Any action to correct 02320 the problem should be performed on that computer. 02320 Your computer is not active in the domain you specified. 02320 02320 ACTION 02320 02320 To perform tasks in the specified domain, you must add the domain to the list 02320 of domains in which the workstation is a member. 02320 02321 The share must be removed from the Distributed File System before it can be 02321 deleted. 02331 The operation is invalid for this device. 02331 EXPLANATION 02331 02331 This message should occur only on a down-level computer. Any action to correct 02331 the problem should be performed on that computer. 02331 The command cannot be used on a communication-device queue. 02331 02331 ACTION 02331 02331 If you need further help, contact your network administrator. 02331 02332 This device cannot be shared. 02332 EXPLANATION 02332 02332 This message should occur only on a down-level computer. Any action to correct 02332 the problem should be performed on that computer. 02332 The device name you typed does not represent a valid local device that can be 02332 shared. 02332 02332 ACTION 02332 02332 Select a valid device name. 02332 02333 This device was not open. 02333 EXPLANATION 02333 02333 This message should occur only on a down-level computer. Any action to correct 02333 the problem should be performed on that computer. 02333 You tried to purge an empty communication-device queue. 02333 02333 ACTION 02333 02333 No action is needed. 02333 02334 This device name list is invalid. 02334 EXPLANATION 02334 02334 This message should occur only on a down-level computer. Any action to correct 02334 the problem should be performed on that computer. 02334 A software error occurred. 02334 02334 ACTION 02334 02334 Contact technical support. 02334 02334 02335 The queue priority is invalid. 02335 EXPLANATION 02335 02335 This message should occur only on a down-level computer. Any action to correct 02335 the problem should be performed on that computer. 02335 A software error occurred. 02335 02335 ACTION 02335 02335 Contact technical support. 02335 02337 There are no shared communication devices. 02337 EXPLANATION 02337 02337 This message should occur only on a down-level computer. Any action to correct 02337 the problem should be performed on that computer. 02337 The server is not sharing any communication-device queues, so the command you 02337 typed is invalid. 02337 02337 ACTION 02337 02337 No action is needed. 02337 02338 The queue you specified does not exist. 02338 EXPLANATION 02338 02338 This message should occur only on a down-level computer. Any action to correct 02338 the problem should be performed on that computer. 02338 The queue name you typed does not exist. 02338 02338 ACTION 02338 02338 Check the spelling of the queue name. 02338 02340 This list of devices is invalid. 02340 EXPLANATION 02340 02340 This message should occur only on a down-level computer. Any action to correct 02340 the problem should be performed on that computer. 02340 A software error occurred. 02340 02340 ACTION 02340 02340 Contact technical support. 02340 02341 The requested device is invalid. 02341 EXPLANATION 02341 02341 This message should occur only on a down-level computer. Any action to correct 02341 the problem should be performed on that computer. 02341 The device name is invalid because it does not represent a physical device or 02341 because the device hardware is faulty. 02341 02341 ACTION 02341 02341 Check the spelling of the device name, and then retype the command. 02341 02341 If the problem persists, contact your network administrator. 02341 Your administrator should use diagnostics to check that the device hardware is 02341 properly installed and working. 02341 02341 For more assistance, contact your hardware dealer. 02341 02342 This device is already in use by the spooler. 02342 EXPLANATION 02342 02342 This message should occur only on a down-level computer. Any action to correct 02342 the problem should be performed on that computer. 02342 This device is used with a printer queue. You cannot use a device with both 02342 printer queues and communication-device queues. 02342 02342 ACTION 02342 02342 To use this device with a communication-device queue, you must first disconnect 02342 all printer queues from it. 02342 02343 This device is already in use as a communication device. 02343 EXPLANATION 02343 02343 This message should occur only on a down-level computer. Any action to correct 02343 the problem should be performed on that computer. 02343 This device is used with a communication-device queue. 02343 You cannot use a device with both communication-device queues and printer 02343 queues. 02343 02343 ACTION 02343 02343 To use this device with a printer queue, you must 02343 disconnect all communication-device queues from it. 02343 02351 This computer name is invalid. 02351 EXPLANATION 02351 02351 The specified computer name is invalid. 02351 02351 ACTION 02351 02351 Contact technical support. 02351 02351 02354 The string and prefix specified are too long. 02354 EXPLANATION 02354 02354 This message should occur only on a down-level computer. Any action to correct 02354 the problem should be performed on that computer. 02354 A software error occurred. 02354 02354 ACTION 02354 02354 Contact technical support. 02354 02354 02356 This path component is invalid. 02356 EXPLANATION 02356 02356 This message should occur only on a down-level computer. Any action to correct 02356 the problem should be performed on that computer. 02356 A software error occurred. 02356 02356 ACTION 02356 02356 Contact technical support. 02356 02357 Could not determine the type of input. 02357 EXPLANATION 02357 02357 A software error occurred. 02357 02357 ACTION 02357 02357 Contact technical support. 02357 02362 The buffer for types is not big enough. 02362 EXPLANATION 02362 02362 A software error occurred. 02362 02362 ACTION 02362 02362 Contact technical support. 02362 02370 Profile files cannot exceed 64K. 02370 EXPLANATION 02370 02370 This message should occur only on a down-level computer. Any action to correct 02370 the problem should be performed on that computer. 02370 The profile is too large. Profile files can be no larger than 64 kilobytes. 02370 02370 ACTION 02370 02370 Remove unnecessary commands from the profile and try loading it again. 02370 02371 The start offset is out of range. 02371 EXPLANATION 02371 02371 This message should occur only on a down-level computer. Any action to correct 02371 the problem should be performed on that computer. 02371 A software error occurred. 02371 02371 ACTION 02371 02371 Contact technical support. 02371 02372 The system cannot delete current connections to network resources. 02372 EXPLANATION 02372 02372 This message should occur only on a down-level computer. Any action to correct 02372 the problem should be performed on that computer. 02372 Loading the profile failed because one or more connections between your 02372 computer and other network computers are active. LAN Manager could not delete 02372 the active connections. 02372 02372 ACTION 02372 02372 If you were trying to load the profile onto a workstation, be sure the 02372 workstation is not actively using any shared resources. Be sure the current 02372 directory in each session is not a shared directory. 02372 02372 If you were trying to load the profile onto a server, you must wait until none 02372 of the server's shared resources are being actively used. To see which users 02372 are actively using the server's resources, type: 02372 02372 NET FILE 02372 02373 The system was unable to parse the command line in this file. 02373 EXPLANATION 02373 02373 This message should occur only on a down-level computer. Any action to correct 02373 the problem should be performed on that computer. 02373 The profile contains an invalid command. 02373 02373 ACTION 02373 02373 Check the profile. See your network administrator if you need assistance. 02373 02374 An error occurred while loading the profile file. 02374 EXPLANATION 02374 02374 This message should occur only on a down-level computer. Any action to correct 02374 the problem should be performed on that computer. 02374 The system could not open the profile. 02374 02374 ACTION 02374 02374 The profile file may be damaged. Create a new profile. If you need assistance, 02374 contact your network administrator. 02374 02375 Errors occurred while saving the profile file. The profile was partially 02375 saved. 02375 EXPLANATION 02375 02375 This message should occur only on a down-level computer. Any action to correct 02375 the problem should be performed on that computer. 02375 You are logged on with an account that does not have sufficient privilege to 02375 save the server's entire current configuration. Only part of the configuration 02375 was saved to the profile. 02375 02375 ACTION 02375 02375 Log on with an account that has administrative privilege (or server operator 02375 privilege) before saving a server profile. 02375 02375 02377 Log file *** is full. 02377 EXPLANATION 02377 02377 This message should occur only on a down-level computer. Any action to correct 02377 the problem should be performed on that computer. 02377 The log file is too large. 02377 02377 ACTION 02377 02377 Clear the log file or increase the MAXERRORLOG entry in the computer's 02377 configuration file. If you need assistance, contact your network 02377 administrator. 02377 02378 This log file has changed between reads. 02378 EXPLANATION 02378 02378 You cannot begin reading the log file from the previously established position 02378 because the log file has changed since the last time you read it. 02378 02378 ACTION 02378 02378 Read the log file from the beginning. 02378 02379 Log file *** is corrupt. 02379 NET2379 02380 The source path cannot be a directory. 02380 EXPLANATION 02380 02380 This message should occur only on a down-level computer. Any action to correct 02380 the problem should be performed on that computer. 02380 The source path you typed is a directory name, which is not 02380 allowed. 02380 02380 ACTION 02380 02380 You must include a filename or wildcard in the path. 02380 02380 To copy all files in a directory, type: 02380 02380 COPY [source]\*.* destination 02380 02381 The source path is illegal. 02381 EXPLANATION 02381 02381 This message should occur only on a down-level computer. Any action to correct 02381 the problem should be performed on that computer. 02381 You referred to a nonexistent drive, directory, or 02381 filename, or you typed the command incorrectly. 02381 02381 ACTION 02381 02381 Check the spelling of the source or pathname you have typed. 02381 Remember to precede computer names with two backslashes, as in \\computername. 02381 02382 The destination path is illegal. 02382 EXPLANATION 02382 02382 This message should occur only on a down-level computer. Any action to correct 02382 the problem should be performed on that computer. 02382 The destination path does not exist. 02382 02382 ACTION 02382 02382 Check the spelling of the destination path. If you need more information, see 02382 your network administrator. 02382 02383 The source and destination paths are on different servers. 02383 EXPLANATION 02383 02383 This message should occur only on a down-level computer. Any action to correct 02383 the problem should be performed on that computer. 02383 A software error occurred. 02383 02383 ACTION 02383 02383 Contact technical support. 02383 02385 The Run server you requested is paused. 02385 EXPLANATION 02385 02385 This message should occur only on a down-level computer. Any action to correct 02385 the problem should be performed on that computer. 02385 You tried to run a program or command on a server that is paused. 02385 02385 ACTION 02385 02385 See your network administrator. The administrator must continue the server for 02385 your command to run. 02385 02389 An error occurred when communicating with a Run server. 02389 EXPLANATION 02389 02389 This message should occur only on a down-level computer. Any action to correct 02389 the problem should be performed on that computer. 02389 LAN Manager found a problem while trying to complete the task. 02389 02389 ACTION 02389 02389 Type the command again in a few minutes. If you continue to receive this 02389 message, see your network administrator. 02389 02391 An error occurred when starting a background process. 02391 EXPLANATION 02391 02391 This message should occur only on a down-level computer. Any action to correct 02391 the problem should be performed on that computer. 02391 LAN Manager found a problem while trying to complete the task. 02391 02391 ACTION 02391 02391 Type the command again in a few minutes. If you continue to receive this 02391 message, see your network administrator. 02391 02392 The shared resource you are connected to could not be found. 02392 EXPLANATION 02392 02392 This message should occur only on a down-level computer. Any action to correct 02392 the problem should be performed on that computer. 02392 LAN Manager found a problem while trying to complete the task. 02392 02392 ACTION 02392 02392 Type the command again in a few minutes. If you continue to receive this 02392 message, see your network administrator. 02392 02400 The LAN adapter number is invalid. 02400 EXPLANATION 02400 02400 This message should occur only on a down-level computer. Any action to correct 02400 the problem should be performed on that computer. 02400 The LAN adapter number in the configuration file is incorrect. 02400 02400 ACTION 02400 02400 A NETn entry in the [networks] section of the computer's configuration file 02400 needs to be corrected. See your network administrator if you need assistance. 02400 02401 There are open files on the connection. 02401 EXPLANATION 02401 02401 You tried to delete an active connection. There 02401 are open files or requests pending on this connection. 02401 02401 ACTION 02401 02401 Close all files and end all programs related to the connection before you try 02401 to delete it. 02401 02402 Active connections still exist. 02402 EXPLANATION 02402 02402 This message should occur only on a down-level computer. Any action to correct 02402 the problem should be performed on that computer. 02402 You tried to delete a network connection that has an active process, or you 02402 tried to log off while you have an active process. 02402 02402 ACTION 02402 02402 Be sure that the processes running on a server are completed before you break 02402 the connection to that server, and that processes on all remote servers are 02402 completed before you log off. 02402 02403 This share name or password is invalid. 02403 EXPLANATION 02403 02403 Either the share name or password you typed is incorrect. 02403 02403 ACTION 02403 02403 Check the spelling of the share name or password. If you still have problems, 02403 ask your network administrator to verify the password and the share name. Your 02403 administrator should also verify that you have access to the resource. 02403 02403 This problem can also be caused by duplicate computer names. Do not give 02403 computers on different networks identical computer names if there is any 02403 computer that is on both networks. 02403 02404 The device is being accessed by an active process. 02404 EXPLANATION 02404 02404 The drive letter you specified is the current drive of a session. You tried to 02404 delete a drive redirection (x:) while it is in use, possibly as your current 02404 drive. 02404 02404 ACTION 02404 02404 Be sure the drive you are trying to delete is not the current drive in any of 02404 your sessions. 02404 02405 The drive letter is in use locally. 02405 EXPLANATION 02405 02405 This message should occur only on a down-level computer. Any action to correct 02405 the problem should be performed on that computer. 02405 You tried to assign a local drive letter to a shared resource. 02405 02405 ACTION 02405 02405 Use a drive letter that does not correspond to a local drive. 02405 02430 The specified client is already registered for the specified event. 02430 EXPLANATION 02430 02430 This message should occur only on a down-level computer. Any action to correct 02430 the problem should be performed on that computer. 02430 A program requested the alerter notify it of an event for which it is already 02430 receiving notifications. 02430 02430 ACTION 02430 02430 Contact technical support. 02430 02431 The alert table is full. 02431 EXPLANATION 02431 02431 This message should occur only on a down-level computer. Any action to correct 02431 the problem should be performed on that computer. 02431 The number of alert notifications requested exceeded the 02431 number specified by the NUMALERTS entry in your configuration 02431 file. 02431 02431 ACTION 02431 02431 Increase the value of the NUMALERTS entry. Then stop and 02431 restart the Workstation service. 02431 02432 An invalid or nonexistent alert name was raised. 02432 EXPLANATION 02432 02432 A software error occurred. 02432 02432 ACTION 02432 02432 Be sure the Alerter service is started. 02432 02432 If this error occurs while the Alerter service is started, contact technical 02432 support. 02432 02433 The alert recipient is invalid. 02433 EXPLANATION 02433 02433 This message should occur only on a down-level computer. Any action to correct 02433 the problem should be performed on that computer. 02433 A software error occurred. 02433 02433 ACTION 02433 02433 Contact technical support. 02433 02434 A user's session with this server has been deleted 02434 because the user's logon hours are no longer valid. 02434 EXPLANATION 02434 02434 This message should occur only on a down-level computer. Any action to correct 02434 the problem should be performed on that computer. 02434 LAN Manager ended a user's session with this server because the user's logon 02434 time expired. 02434 02434 ACTION 02434 02434 No action is needed. 02434 02434 To define the times during which a user can access the server, type: 02434 02434 NET USER username /TIMES:times 02434 02440 The log file does not contain the requested record number. 02440 EXPLANATION 02440 02440 This message should occur only on a down-level computer. Any action to correct 02440 the problem should be performed on that computer. 02440 A software error occurred. 02440 02440 ACTION 02440 02440 Contact technical support. 02440 02440 02450 The user accounts database is not configured correctly. 02450 EXPLANATION 02450 02450 This message should occur only on a down-level computer. Any action to correct 02450 the problem should be performed on that computer. 02450 The user accounts database is not configured properly. There may be a conflict 02450 between the computer's role, which defines how this server participates in 02450 logon security, and the server's record of the name of the primary domain 02450 controller. 02450 02450 For example, the role of this computer may be set to PRIMARY while the primary 02450 domain controller entry names a different server. 02450 02450 ACTION 02450 02450 Contact your network administrator. 02450 02451 This operation is not permitted when the Netlogon service is running. 02451 EXPLANATION 02451 02451 This message should occur only on a down-level computer. Any action to correct 02451 the problem should be performed on that computer. 02451 You cannot perform this task while the Netlogon service is running. 02451 02451 ACTION 02451 02451 To perform this task, stop the Netlogon service on the server. Retype the 02451 command, and then restart the Netlogon service. 02451 02452 This operation is not allowed on the last administrative account. 02452 EXPLANATION 02452 02452 This message should occur only on a down-level computer. Any action to correct 02452 the problem should be performed on that computer. 02452 This is the only account with administrative privilege. You cannot delete it. 02452 02452 ACTION 02452 02452 You must add another account with administrative privilege before 02452 deleting this one. 02452 02452 02453 Could not find domain controller for this domain. 02453 EXPLANATION 02453 02453 Windows NT could not find the domain controller for this domain. This task 02453 cannot be completed unless the domain controller is running in this domain. 02453 02453 ACTION 02453 02453 Start the Netlogon service on the domain controller. 02453 02454 Could not set logon information for this user. 02454 EXPLANATION 02454 02454 This message should occur only on a down-level computer. Any action to correct 02454 the problem should be performed on that computer. 02454 The logon server could not update the logon or logoff information. 02454 02454 ACTION 02454 02454 Stop and restart the Netlogon service at the server that returned this error. 02454 02454 02455 The Netlogon service has not been started. 02455 EXPLANATION 02455 02455 This message should occur only on a down-level computer. Any action to correct 02455 the problem should be performed on that computer. 02455 The Netlogon service is not running. 02455 02455 ACTION 02455 02455 Start the Netlogon service at the server, and then type the command again. 02455 02456 Unable to add to the user accounts database. 02456 EXPLANATION 02456 02456 This message should occur only on a down-level computer. Any action to correct 02456 the problem should be performed on that computer. 02456 The user accounts database cannot be enlarged because the server's hard disk is 02456 full. 02456 02456 ACTION 02456 02456 Check the server's disk and remove unnecessary and outdated files. 02456 02457 This server's clock is not synchronized with the primary domain controller's 02457 clock. 02458 A password mismatch has been detected. 02460 The server identification does not specify a valid server. 02460 EXPLANATION 02460 02460 This message should occur only on a down-level computer. Any action to correct 02460 the problem should be performed on that computer. 02460 A software error occurred. 02460 02460 ACTION 02460 02460 If this error persists or causes other errors, contact technical support. 02460 02461 The session identification does not specify a valid session. 02461 EXPLANATION 02461 02461 This message should occur only on a down-level computer. Any action to correct 02461 the problem should be performed on that computer. 02461 A software error occurred. 02461 02461 ACTION 02461 02461 If this error persists or causes other errors, contact technical support. 02461 02462 The connection identification does not specify a valid connection. 02462 EXPLANATION 02462 02462 This message should occur only on a down-level computer. Any action to correct 02462 the problem should be performed on that computer. 02462 A software error occurred. 02462 02462 ACTION 02462 02462 If this error persists or causes other errors, contact technical support. 02462 02463 There is no space for another entry in the table of available servers. 02463 EXPLANATION 02463 02463 This message should occur only on a down-level computer. Any action to correct 02463 the problem should be performed on that computer. 02463 The table of available servers is full. You will not be able to see a complete 02463 list of network servers when you type the NET VIEW command or use the LAN 02463 Manager Screen. 02463 02463 ACTION 02463 02463 Stopping other processes or services on the workstation may free enough memory 02463 to correct this problem. 02463 02463 MS-DOS workstations have a NUMSERVERS entry in the configuration file, which 02463 specifies the number of servers that the workstation can list with NET VIEW. 02463 Increasing this value can solve this problem, but will also use more memory. 02463 02464 The server has reached the maximum number of sessions it supports. 02464 EXPLANATION 02464 02464 This message should occur only on a down-level computer. Any action to correct 02464 the problem should be performed on that computer. 02464 The server is supporting the maximum number of sessions. 02464 02464 ACTION 02464 02464 Try the command later. You will not be able to start a session with this server 02464 until another user's session has ended. 02464 02464 Also, see your network administrator. Your administrator may want to purchase 02464 an Additional User Pak for the server or increase the value of the MAXUSERS 02464 entry of the server's configuration file. 02464 02465 The server has reached the maximum number of connections it supports. 02465 EXPLANATION 02465 02465 This message should occur only on a down-level computer. Any action to correct 02465 the problem should be performed on that computer. 02465 The server is supporting the maximum number of connections. 02465 02465 ACTION 02465 02465 To make another connection to the server, first end a current connection. 02465 02465 If you have no connections that you can end, try your command again later. You 02465 will be able to make your connection once another user's connection is ended. 02465 02465 Also, see your network administrator. The administrator may want to increase 02465 the value of the MAXCONNECTIONS entry of the server's configuration file. 02465 02466 The server cannot open more files because it has reached its maximum number. 02466 EXPLANATION 02466 02466 This message should occur only on a down-level computer. Any action to correct 02466 the problem should be performed on that computer. 02466 No more files on the server can be opened. 02466 02466 ACTION 02466 02466 To open another file, you will first have to close a file or stop a network 02466 application that has open files. 02466 02466 Also, see your network administrator. Your administrator may want to increase 02466 the value of the MAXOPENS entry in the server's configuration file. 02466 02467 There are no alternate servers registered on this server. 02467 EXPLANATION 02467 02467 This message should occur only on a down-level computer. Any action to correct 02467 the problem should be performed on that computer. 02467 This server has no alternate servers registered. 02467 02467 ACTION 02467 02467 Contact your network administrator. 02467 02470 Try down-level (remote admin protocol) version of API instead. 02480 The UPS driver could not be accessed by the UPS service. 02480 EXPLANATION 02480 02480 This message should occur only on a down-level computer. Any action to correct 02480 the problem should be performed on that computer. 02480 The UPS service could not access the UPS driver (UPSDRV.OS2). The UPS driver 02480 might not be configured properly. 02480 02480 ACTION 02480 02480 Be sure that your CONFIG.SYS file has a DEVICE line specifying the location of 02480 the UPS device driver and that the /PORT option of that line specifies the 02480 serial port that the UPS is connected to. This line must appear before any 02480 other lines that install other serial port drivers. 02480 02480 If you make changes to CONFIG.SYS, you will need to reboot your system for them 02480 to take effect. 02481 The UPS service is not configured correctly. 02482 The UPS service could not access the specified Comm Port. 02483 The UPS indicated a line fail or low battery situation. Service not started. 02484 The UPS service failed to perform a system shut down. 02500 The program below returned an MS-DOS error code: 02501 The program below needs more memory: 02502 The program below called an unsupported MS-DOS function: 02503 The workstation failed to boot. 02504 The file below is corrupt. 02505 No loader is specified in the boot-block definition file. 02506 NetBIOS returned an error: The NCB and SMB are dumped above. 02507 A disk I/O error occurred. 02508 Image parameter substitution failed. 02509 Too many image parameters cross disk sector boundaries. 02510 The image was not generated from an MS-DOS diskette formatted with /S. 02511 Remote boot will be restarted later. 02512 The call to the Remoteboot server failed. 02513 Cannot connect to the Remoteboot server. 02514 Cannot open image file on the Remoteboot server. 02515 Connecting to the Remoteboot server... 02516 Connecting to the Remoteboot server... 02517 Remote boot service was stopped; check the error log for the cause of the 02517 problem. 02518 Remote boot startup failed; check the error log for the cause of the problem. 02519 A second connection to a Remoteboot resource is not allowed. 02550 The browser service was configured with MaintainServerList=No. 02610 Service failed to start since none of the network adapters started with this 02610 service. 02611 Service failed to start due to bad startup information in the registry. 02612 Service failed to start because its database is absent or corrupt. 02613 Service failed to start because RPLFILES share is absent. 02614 Service failed to start because RPLUSER group is absent. 02615 Cannot enumerate service records. 02616 Workstation record information has been corrupted. 02617 Workstation record was not found. 02618 Workstation name is in use by some other workstation. 02619 Profile record information has been corrupted. 02620 Profile record was not found. 02621 Profile name is in use by some other profile. 02622 There are workstations using this profile. 02623 Configuration record information has been corrupted. 02624 Configuration record was not found. 02625 Adapter id record information has been corrupted. 02626 An internal service error has occurred. 02627 Vendor id record information has been corrupted. 02628 Boot block record information has been corrupted. 02629 The user account for this workstation record is missing. 02630 The RPLUSER local group could not be found. 02631 Boot block record was not found. 02632 Chosen profile is incompatible with this workstation. 02633 Chosen network adapter id is in use by some other workstation. 02634 There are profiles using this configuration. 02635 There are workstations, profiles or configurations using this boot block. 02636 Service failed to backup Remoteboot database. 02637 Adapter record was not found. 02638 Vendor record was not found. 02639 Vendor name is in use by some other vendor record. 02640 (boot name, vendor id) is in use by some other boot block record. 02641 Configuration name is in use by some other configuration. 02660 The internal database maintained by the Dfs service is corrupt 02661 One of the records in the internal Dfs database is corrupt 02662 There is no volume whose entry path matches the input Entry Path 02663 A volume with the given name already exists 02664 The server share specified is already shared in the Dfs 02665 The indicated server share does not support the indicated Dfs volume 02666 The operation is not valid on a non-leaf volume 02667 The operation is not valid on a leaf volume 02668 The operation is ambiguous because the volume has multiple servers 02669 Unable to create a junction point 02670 The server is not Dfs Aware 02671 The specified rename target path is invalid 02672 The specified Dfs volume is offline 02673 The specified server is not a server for this volume 02674 A cycle in the Dfs name was detected 02675 The operation is not supported on a server-based Dfs 02676 This volume is already supported by the specified server-share 02677 Can't remove the last server-share supporting this volume 02678 The operation is not supported for an Inter-Dfs volume 02679 The internal state of the Dfs Service has become inconsistent 02680 The Dfs Service has been installed on the specified server 02681 The Dfs data being reconciled is identical 02682 The Dfs root volume cannot be deleted - Uninstall Dfs if required 02683 A child or parent directory of the share is already in a Dfs 02690 Dfs internal error 02691 This machine is already joined to a domain. 02692 This machine is not currently joined to a domain. 02693 This machine is a domain controller and cannot be unjoined from a domain. 02694 The destination domain controller does not support creating machine accounts in 02694 OUs. 02695 The specified workgroup name is invalid 02696 The specified computer name is incompatible with the default language used on 02696 the domain controller. 02697 The specified computer account could not be found. 02999 This is the last error in NERR range. 03000 Drive *** is nearly full. *** bytes are available. 03000 Please warn users and delete unneeded files. 03001 *** errors were logged in the last *** minutes. 03001 Please review the server's error log. 03002 *** network errors occurred in the last *** minutes. 03002 Please review the server's error log. The server and/or 03002 network hardware may need service. 03003 There were *** bad password attempts in the last *** minutes. 03003 Please review the server's audit trail. 03004 There were *** access-denied errors in the last *** minutes. 03004 Please review the server's audit trail. 03006 The error log is full. No errors will be logged until 03006 the file is cleared or the limit is raised. 03007 The error log is 80% full. 03008 The audit log is full. No audit entries will be logged 03008 until the file is cleared or the limit is raised. 03009 The audit log is 80% full. 03010 An error occurred closing file ***. 03010 Please check the file to make sure it is not corrupted. 03011 The administrator has closed ***. 03012 There were *** access-denied errors in the last *** minutes. 03020 A power failure was detected at ***. The server has been paused. 03021 Power has been restored at ***. The server is no longer paused. 03022 The UPS service is starting shut down at *** due to low battery. 03023 There is a problem with a configuration of user specified 03023 shut down command file. The UPS service started anyway. 03025 A defective sector on drive *** has been replaced (hotfixed). 03025 No data was lost. You should run CHKDSK soon to restore full 03025 performance and replenish the volume's spare sector pool. 03025 03025 The hotfix occurred while processing a remote request. 03026 A disk error occurred on the HPFS volume in drive ***. 03026 The error occurred while processing a remote request. 03027 The user accounts database (NET.ACC) is corrupted. The local security 03027 system is replacing the corrupted NET.ACC with the backup 03027 made on *** at ***. 03027 Any updates made to the database after this time are lost. 03027 03028 The user accounts database (NET.ACC) is missing. The local 03028 security system is restoring the backup database 03028 made on *** at ***. 03028 Any updates made to the database after this time are lost. 03028 03029 Local security could not be started because the user accounts database 03029 (NET.ACC) was missing or corrupted, and no usable backup 03029 database was present. 03029 03029 THE SYSTEM IS NOT SECURE. 03029 03030 The server cannot export directory ***, to client ***. 03030 It is exported from another server. 03031 The replication server could not update directory *** from the source 03031 on *** due to error ***. 03032 Master *** did not send an update notice for directory *** at the expected 03032 time. 03033 User *** has exceeded account limitation *** on server ***. 03034 The primary domain controller for domain *** failed. 03035 Failed to authenticate with ***, a Windows NT or Windows 2000 Domain Controller 03035 for 03035 domain ***. 03036 The replicator attempted to log on at *** as *** and failed. 03037 @I *LOGON HOURS 03038 Replicator could not access *** 03038 on *** due to system error ***. 03039 Replicator limit for files in a directory has been exceeded. 03040 Replicator limit for tree depth has been exceeded. 03041 The replicator cannot update directory ***. It has tree integrity 03041 and is the current directory for some process. 03042 Network error *** occurred. 03045 System error *** occurred. 03046 Cannot log on. User is currently logged on and argument TRYUSER 03046 is set to NO. 03047 IMPORT path *** cannot be found. 03048 EXPORT path *** cannot be found. 03049 Replicated data has changed in directory ***. 03050 Replicator failed to update signal file in directory *** due to 03050 *** system error. 03051 The Registry or the information you just typed includes an illegal 03051 value for "***". 03051 EXPLANATION 03051 03051 You specified invalid values for one or more of the service's options. 03051 03051 ACTION 03051 03051 Retype the command with correct values, or change the values for the listed 03051 options in the configuration file. 03051 03052 The required parameter was not provided on the command 03052 line or in the configuration file. 03052 EXPLANATION 03052 03052 This message should occur only on a down level computer. Any action to correct 03052 the problem should be performed on that computer. 03052 You must specify a value for the listed option. 03052 03052 ACTION 03052 03052 Define a value for the option, either from the command line or in the 03052 configuration file. 03052 03053 LAN Manager does not recognize "***" as a valid option. 03053 EXPLANATION 03053 03053 This message should occur only on a down level computer. Any action to correct 03053 the problem should be performed on that computer. 03053 This option is not valid for this service. 03053 03053 ACTION 03053 03053 Check the spelling of this option. If you did not type it from the command 03053 line, check the configuration file. 03053 03054 A request for resource could not be satisfied. 03054 EXPLANATION 03054 03054 The service required more of the listed resource than was 03054 available. 03054 03054 ACTION 03054 03054 Increase the amount of this resource. Stopping other services or applications 03054 may free some resources, such as memory. 03054 03054 Also check the disk where your pagefile(s) are located. If this disk is full, 03054 delete unnecessary files and directories from it to clear space. 03054 03055 A problem exists with the system configuration. 03055 EXPLANATION 03055 03055 This message should occur only on a down level computer. Any action to correct 03055 the problem should be performed on that computer. 03055 The system is not configured correctly. 03055 03055 ACTION 03055 03055 Contact your network administrator. 03055 03056 A system error has occurred. 03056 EXPLANATION 03056 03056 The system error may be an internal LAN Manager or Windows NT error. 03056 03056 ACTION 03056 03056 If the error code is Error 52, you need to delete the duplicate domain name in 03056 the [othodomains] section of your configuration file. If an error code 03056 beginning with "NET" is displayed, you can use the HELPMSG command to see 03056 more information about the error as follows: 03056 NET HELPMSG message# 03056 03056 where message# is the actual error number. 03056 03056 If no error number was displayed, contact technical support. 03056 03057 An internal consistency error has occurred. 03057 EXPLANATION 03057 03057 A software error occurred. 03057 03057 ACTION 03057 03057 Contact technical support. 03057 03058 The configuration file or the command line has an ambiguous option. 03058 EXPLANATION 03058 03058 This message should occur only on a down level computer. Any action to correct 03058 the problem should be performed on that computer. 03058 Some options can be confused with other options that start with the same 03058 letter. 03058 03058 ACTION 03058 03058 Spell out enough of the option so that it cannot be confused with other command 03058 options. 03058 03059 The configuration file or the command line has a duplicate parameter. 03059 EXPLANATION 03059 03059 This message should occur only on a down level computer. Any action to correct 03059 the problem should be performed on that computer. 03059 An option was used more than once in your command or in the configuration file. 03059 An option can be used only once in a command and once in the configuration 03059 file. If an option is typed from the command line, 03059 it overrides the value in the configuration file. 03059 03059 ACTION 03059 03059 Do not type the same option twice in a command. Be sure not to use different 03059 abbreviations that can specify the same option, such as "wrkserv" and 03059 "wrkservices." 03059 03059 If the error was not caused by a command, check the configuration file for 03059 duplicate options. 03059 03060 The service did not respond to control and was stopped with 03060 the DosKillProc function. 03060 EXPLANATION 03060 03060 The service did not respond to a control signal. The 03060 service may not be running correctly or a fatal error might have occurred. 03060 Windows NT stopped the service. 03060 03060 ACTION 03060 03060 Contact technical support. 03060 03061 An error occurred when attempting to run the service program. 03061 EXPLANATION 03061 03061 The service you specified could not start. 03061 03061 ACTION 03061 03061 In the [services] section of your configuration file, find the name of the 03061 program file for this service. Be sure this file exists and is an executable 03061 file with a filename extension of .EXE or .COM. 03061 03061 If the program file exists, it may be damaged. If possible, restore the file 03061 from a backup version. Otherwise, contact technical support. 03061 03062 The sub-service failed to start. 03062 EXPLANATION 03062 03062 The specified service could not be started automatically when another service 03062 was started. 03062 03062 ACTION 03062 03062 Start the service individually. 03062 03063 There is a conflict in the value or use of these options: ***. 03063 EXPLANATION 03063 03063 This message should occur only on a down level computer. Any action to correct 03063 the problem should be performed on that computer. 03063 Two command-line options or configuration file entries have conflicting values. 03063 03063 ACTION 03063 03063 Check the command you typed or the configuration file for conflicting options. 03063 03064 There is a problem with the file. 03064 03064 03064 03064 03064 03064 03064 03064 03064 03064 03064 03064 03064 03064 03064 03064 03064 03064 03064 * 03070 memory 03071 disk space 03072 thread 03073 process 03074 Security Failure. 03075 Bad or missing LAN Manager root directory. 03076 The network software is not installed. 03077 The server is not started. 03078 The server cannot access the user accounts database (NET.ACC). 03079 Incompatible files are installed in the LANMAN tree. 03080 The LANMAN\LOGS directory is invalid. 03081 The domain specified could not be used. 03082 The computer name is being used as a message alias on another computer. 03083 The announcement of the server name failed. 03084 The user accounts database is not configured correctly. 03085 The server is not running with user-level security. 03087 The workstation is not configured properly. 03088 View your error log for details. 03089 Unable to write to this file. 03090 ADDPAK file is corrupted. Delete LANMAN\NETPROG\ADDPAK.SER 03090 and reapply all ADDPAKs. 03091 The LM386 server cannot be started because CACHE.EXE is not running. 03092 There is no account for this computer in the security database. 03093 This computer is not a member of the group SERVERS. 03094 The group SERVERS is not present in the local security database. 03095 This Windows NT computer is configured as a member of a workgroup, not as 03095 a member of a domain. The Netlogon service does not need to run in this 03095 configuration. 03096 The Windows NT domain controller for this domain could not be located. 03097 This computer is configured to be the primary domain controller of its domain. 03097 However, the computer *** is currently claiming to be the primary domain 03097 controller 03097 of the domain. 03098 The service failed to authenticate with the primary domain controller. 03099 There is a problem with the security database creation date or serial number. 03100 The operation failed because a network software error occurred. 03100 EXPLANATION 03100 03100 A software error occurred. 03100 03100 ACTION 03100 03100 Contact technical support. 03100 03101 The system ran out of a resource controlled by the *** option. 03101 EXPLANATION 03101 03101 This message should occur only on a down-level computer. Any action to correct 03101 the problem should be performed on that computer. 03101 The system required more of a resource than was available. 03101 03101 ACTION 03101 03101 Change the value of the listed option in the configuration file to allow the 03101 system to access more of the resource. 03101 03102 The service failed to obtain a long-term lock on the 03102 segment for network control blocks (NCBs). The error code is the data. 03102 EXPLANATION 03102 03102 This message should occur only on a down-level computer. Any action to correct 03102 the problem should be performed on that computer. 03102 A software error occurred. 03102 03102 ACTION 03102 03102 Contact technical support. 03102 03103 The service failed to release the long-term lock on the 03103 segment for network control blocks (NCBs). The error code is the data. 03103 EXPLANATION 03103 03103 This message should occur only on a down-level computer. Any action to correct 03103 the problem should be performed on that computer. 03103 A software error occurred. 03103 03103 ACTION 03103 03103 Contact technical support. 03103 03104 There was an error stopping service ***. 03104 The error code from NetServiceControl is the data. 03104 EXPLANATION 03104 03104 This message should occur only on a down-level computer. Any action to correct 03104 the problem should be performed on that computer. 03104 A software error occurred. 03104 03104 ACTION 03104 03104 Contact technical support. 03104 03105 Initialization failed because of a system execution failure on 03105 path ***. The system error code is the data. 03105 EXPLANATION 03105 03105 This message should occur only on a down-level computer. Any action to correct 03105 the problem should be performed on that computer. 03105 A software error occurred. 03105 03105 ACTION 03105 03105 Contact technical support. 03105 03106 An unexpected network control block (NCB) was received. The NCB is the data. 03106 EXPLANATION 03106 03106 A software error occurred. 03106 03106 ACTION 03106 03106 Contact technical support. 03106 03107 The network is not started. 03107 EXPLANATION 03107 03107 This message should occur only on a down-level computer. Any action to correct 03107 the problem should be performed on that computer. 03107 A program or command could not run because LAN Manager 03107 is not started or installed. 03107 03107 ACTION 03107 03107 Check that LAN Manager is installed and that the Workstation service is 03107 started. Then type the command again. 03107 03108 A DosDevIoctl or DosFsCtl to NETWKSTA.SYS failed. 03108 The data shown is in this format: 03108 DWORD approx CS:IP of call to ioctl or fsctl 03108 WORD error code 03108 WORD ioctl or fsctl number 03108 EXPLANATION 03108 03108 This message should occur only on a down-level computer. Any action to correct 03108 the problem should be performed on that computer. 03108 A software error occurred. 03108 03108 ACTION 03108 03108 Contact technical support. 03108 03109 Unable to create or open system semaphore ***. 03109 The error code is the data. 03109 EXPLANATION 03109 03109 This message should occur only on a down-level computer. Any action to correct 03109 the problem should be performed on that computer. 03109 A software error occurred. 03109 03109 ACTION 03109 03109 Contact technical support. 03109 03110 Initialization failed because of an open/create error on the 03110 file ***. The system error code is the data. 03110 EXPLANATION 03110 03110 This message should occur only on a down-level computer. Any action to correct 03110 the problem should be performed on that computer. 03110 A software error occurred. 03110 03110 ACTION 03110 03110 Contact technical support. 03110 03111 An unexpected NetBIOS error occurred. 03111 The error code is the data. 03111 EXPLANATION 03111 03111 This message should occur only on a down-level computer. Any action to correct 03111 the problem should be performed on that computer. 03111 A software error occurred. 03111 03111 ACTION 03111 03111 Contact technical support. 03111 03112 An illegal server message block (SMB) was received. 03112 The SMB is the data. 03112 EXPLANATION 03112 03112 A software error occurred. 03112 03112 ACTION 03112 03112 Contact technical support. 03112 03113 Initialization failed because the requested service *** 03113 could not be started. 03113 EXPLANATION 03113 03113 A software error occurred. 03113 03113 ACTION 03113 03113 Contact technical support. 03113 03114 Some entries in the error log were lost because of a buffer 03114 overflow. 03114 EXPLANATION 03114 03114 This message should occur only on a down-level computer. Any action to correct 03114 the problem should be performed on that computer. 03114 The error log is full, and one or more error log entries have been lost. 03114 03114 ACTION 03114 03114 If you want to save the current error log file, copy it to another filename. 03114 Then clear the error log. You may do this remotely with Event Viewer. 03114 03120 Initialization parameters controlling resource usage other 03120 than net buffers are sized so that too much memory is needed. 03120 EXPLANATION 03120 03120 This message should occur only on a down-level computer. Any action to correct 03120 the problem should be performed on that computer. 03120 The server's main information segment is larger than the 03120 largest segment that can be allocated. 03120 03120 ACTION 03120 03120 Decrease the values for one or more of the following entries in the server's 03120 configuration file: 03120 03120 MAXCHDEVJOB MAXCONNECTIONS MAXOPENS 03120 MAXCHDEVQ MAXLOCKS MAXSHARES 03120 MAXCHDEVS 03120 03120 Then restart the Server service. 03120 03121 The server cannot increase the size of a memory segment. 03121 EXPLANATION 03121 03121 This message should occur only on a down-level computer. Any action to correct 03121 the problem should be performed on that computer. 03121 The server cannot increase the size of a memory segment. 03121 03121 ACTION 03121 03121 Be sure that the MEMMAN entry in the server's CONFIG.SYS file allows swapping 03121 and that there is at least 1 megabyte of free space on the swap disk. The swap 03121 disk is specified by the SWAPPATH entry in the CONFIG.SYS file. 03121 03121 You could also decrease the value of the NUMBIGBUF entry 03121 in the server's configuration file. 03121 03122 Initialization failed because account file *** is either incorrect 03122 or not present. 03122 EXPLANATION 03122 03122 This message should occur only on a down-level computer. Any action to correct 03122 the problem should be performed on that computer. 03122 The user accounts database, NET.ACC, is missing, damaged, or in a format that 03122 is incompatible with this version of LAN Manager. 03122 03122 ACTION 03122 03122 Copy the backup file, NETACC.BKP, to NET.ACC. If NETACC.BKP does not exist, 03122 copy NET.ACC or NETACC.BKP from a backup floppy or from the LAN Manager 03122 distribution disks. 03122 03122 If you have upgraded your LAN Manager software, you may need 03122 to convert the user accounts database to a new format. See the instructions 03122 that came with your upgrade. 03122 03123 Initialization failed because network *** was not started. 03123 EXPLANATION 03123 03123 This message should occur only on a down-level computer. Any action to correct 03123 the problem should be performed on that computer. 03123 All networks named in the SRVNETS entry of the server's configuration file must 03123 use the LAN Manager workstation software. 03123 03123 ACTION 03123 03123 Be sure that all networks named in the SRVNETS entry of the server's 03123 configuration file are also named in the WRKNETS entry of that file. 03123 03124 The server failed to start. Either all three chdev 03124 parameters must be zero or all three must be nonzero. 03124 EXPLANATION 03124 03124 This message should occur only on a down-level computer. Any action to correct 03124 the problem should be performed on that computer. 03124 The configuration entries CHARWAIT, CHARTIME, and CHARCOUNT must all be zero or 03124 must all have non-zero values. 03124 03124 ACTION 03124 03124 Correct the entries and restart the Server service. 03124 03125 A remote API request was halted due to the following 03125 invalid description string: ***. 03125 EXPLANATION 03125 03125 This message should occur only on a down-level computer. Any action to correct 03125 the problem should be performed on that computer. 03125 The server received an invalid request to run a command. The request may have 03125 been damaged by the network. 03125 03125 ACTION 03125 03125 No action is needed. 03125 03125 If this error occurs frequently, contact technical support. 03125 03126 The network *** ran out of network control blocks (NCBs). You may need to 03126 increase NCBs 03126 for this network. The following information includes the 03126 number of NCBs submitted by the server when this error occurred: 03126 EXPLANATION 03126 03126 This message should occur only on a down-level computer. Any action to correct 03126 the problem should be performed on that computer. 03126 The server found a resource shortage in a network driver 03126 when it tried to issue a network control block (NCB). 03126 03126 ACTION 03126 03126 Be sure that the NETn entries in the configuration file specify valid NetBIOS 03126 device drivers and that these device drivers are in the LANMAN\DRIVERS 03126 directory. Also be sure that the CONFIG.SYS file contains a DEVICE line 03126 specifying the absolute paths of the device drivers. 03126 03126 You may be able to increase the NCBs for the listed network by changing an 03126 option in the network's NETn entry in the configuration file. See the 03126 installation guide that came with your network adapter for information about 03126 those options. 03126 03126 If you need assistance, contact your network administrator. 03126 03127 The server cannot create the *** mailslot needed to send 03127 the ReleaseMemory alert message. The error received is: 03127 EXPLANATION 03127 03127 This message should occur only on a down-level computer. Any action to correct 03127 the problem should be performed on that computer. 03127 The server cannot respond to a ReleaseMemory alert. Otherwise, the server is 03127 functioning normally. 03127 03127 ACTION 03127 03127 No action is needed. 03127 03128 The server failed to register for the ReleaseMemory alert, 03128 with recipient ***. The error code from 03128 NetAlertStart is the data. 03128 EXPLANATION 03128 03128 This message should occur only on a down-level computer. Any action to correct 03128 the problem should be performed on that computer. 03128 The server cannot respond to a ReleaseMemory alert. Otherwise, the server is 03128 functioning normally. 03128 03128 ACTION 03128 03128 No action is needed. 03128 03129 The server cannot update the AT schedule file. The file 03129 is corrupted. 03129 EXPLANATION 03129 03129 This message should occur only on a down-level computer. Any action to correct 03129 the problem should be performed on that computer. 03129 The schedule file, SCHED.LOG, in the LOGS directory, is damaged. 03129 03129 ACTION 03129 03129 Restore the schedule file from a backup copy, or delete the file and create a 03129 new one using the AT utility. 03129 03130 The server encountered an error when calling 03130 NetIMakeLMFileName. The error code is the data. 03130 EXPLANATION 03130 03130 This message should occur only on a down-level computer. Any action to correct 03130 the problem should be performed on that computer. 03130 The server could not find the NET.MSG file. 03130 03130 ACTION 03130 03130 The NET.MSG file should be in the LANMAN\NETPROG directory. If it is not there, 03130 copy it from the LAN Manager distribution disks. 03130 03131 Initialization failed because of a system execution failure on 03131 path ***. There is not enough memory to start the process. 03131 The system error code is the data. 03131 EXPLANATION 03131 03131 This message should occur only on a down-level computer. Any action to correct 03131 the problem should be performed on that computer. 03131 There is not enough memory available to run the Server service. 03131 03131 ACTION 03131 03131 Stop other applications and services (except the Workstation service) that are 03131 running on the computer and try again. If the problem continues, you will have 03131 to add memory to the computer. 03131 03132 Longterm lock of the server buffers failed. 03132 Check swap disk's free space and restart the system to start the server. 03132 EXPLANANTION 03132 03132 This message should occur only on a down-level computer. Any action to correct 03132 the problem should be performed on that computer. 03132 The server was unable to access required memory. 03132 03132 ACTION 03132 03132 Be sure there is at least 1 megabyte of free space on the swap disk. The swap 03132 disk is specified by the SWAPPATH entry in the CONFIG.SYS file. Then restart 03132 the computer and try to start the Server service again. 03132 03140 The service has stopped due to repeated consecutive 03140 occurrences of a network control block (NCB) error. The last bad NCB follows 03140 in raw data. 03140 EXPLANATION 03140 03140 A software error occurred. 03140 03140 ACTION 03140 03140 Contact technical support. 03140 03141 The Message server has stopped due to a lock on the 03141 Message server shared data segment. 03141 EXPLANATION 03141 03141 This message should occur only on a down-level computer. Any action to correct 03141 the problem should be performed on that computer. 03141 A software error occurred. 03141 03141 ACTION 03141 03141 Contact technical support. 03141 03150 A file system error occurred while opening or writing to the 03150 system message log file ***. Message logging has been 03150 switched off due to the error. The error code is the data. 03150 03151 Unable to display message POPUP due to system VIO call error. 03151 The error code is the data. 03151 EXPLANATION 03151 03151 This message should occur only on a down-level computer. Any action to correct 03151 the problem should be performed on that computer. 03151 The Messenger service could not display a message because an error occurred 03151 while the message box was being created. 03151 03151 ACTION 03151 03151 If message logging was on, the message was still logged to 03151 the file and can be viewed by displaying or printing the message log file. 03151 03152 An illegal server message block (SMB) was received. The SMB is the data. 03152 EXPLANATION 03152 03152 A software error occurred. 03152 03152 ACTION 03152 03152 Contact technical support. 03152 03152 03160 The workstation information segment is bigger than 64K. 03160 The size follows, in DWORD format: 03160 EXPLANATION 03160 03160 This message should occur only on a down-level computer. Any action to correct 03160 the problem should be performed on that computer. 03160 The workstation's main information segment is larger than 03160 the largest segment that can be allocated. 03160 03160 ACTION 03160 03160 Decrease the values for one or more of the following entries in the 03160 [workstation] section of the configuration file. If you need assistance, 03160 contact your network administrator. 03160 03160 MAXCMDS NUMCHARBUF NUMWORKBUF 03160 MAXTHREADS NUMDGRAMBUF SIZCHARBUF NUMALERTS NUMSERVICES 03160 SIZERROR 03160 03160 After you change the configuration file, restart the Workstation service. If 03160 you change the MAXCMDS or MAXTHREADS entry, you will have to restart the 03160 computer. 03160 03161 The workstation was unable to get the name-number of the computer. 03161 EXPLANATION 03161 03161 This message should occur only on a down-level computer. Any action to correct 03161 the problem should be performed on that computer. 03161 A software error occurred. 03161 03161 ACTION 03161 03161 Contact technical support. 03161 03162 The workstation could not initialize the Async NetBIOS Thread. 03162 The error code is the data. 03162 EXPLANATION 03162 03162 This message should occur only on a down-level computer. Any action to correct 03162 the problem should be performed on that computer. 03162 A software error occurred. 03162 03162 ACTION 03162 03162 Contact technical support. 03162 03163 The workstation could not open the initial shared segment. 03163 The error code is the data. 03163 EXPLANATION 03163 03163 This message should occur only on a down-level computer. Any action to correct 03163 the problem should be performed on that computer. 03163 The Workstation service may have been started improperly. Always use the NET 03163 START command to start the workstation; do not run WKSTA.EXE directly. 03163 03163 ACTION 03163 03163 To start the Workstation service, type: 03163 03163 NET START WORKSTATION 03163 03163 If more problems occur, contact technical support. 03163 03164 The workstation host table is full. 03164 EXPLANATION 03164 03164 This message should occur only on a down-level computer. Any action to correct 03164 the problem should be performed on that computer. 03164 The internal table that maintains information about network servers is full. 03164 You can access all network servers normally, but you may not be able to see all 03164 servers when you type the NET VIEW command. 03164 03164 This happens only on very large networks. 03164 03164 ACTION 03164 03164 Contact your network administrator. Your administrator may want to divide the 03164 network into domains, using the DOMAIN entry in each computer's configuration 03164 file. 03164 03165 A bad mailslot server message block (SMB) was received. The SMB is the data. 03165 EXPLANATION 03165 03165 This message should occur only on a down-level computer. Any action to correct 03165 the problem should be performed on that computer. 03165 A software error occurred. 03165 03165 ACTION 03165 03165 Contact technical support. 03165 03166 The workstation encountered an error while trying to start the user accounts 03166 database. 03166 The error code is the data. 03166 EXPLANATION 03166 03166 This message should occur only on a down-level computer. Any action to correct 03166 the problem should be performed on that computer. 03166 The Workstation service failed to start the user accounts database. 03166 03166 ACTION 03166 03166 Contact technical support. 03166 03167 The workstation encountered an error while responding to an SSI revalidation 03167 request. 03167 The function code and the error codes are the data. 03167 EXPLANATION 03167 03167 This message should occur only on a down-level computer. Any action to correct 03167 the problem should be performed on that computer. 03167 A software error occurred. 03167 03167 ACTION 03167 03167 Contact technical support. 03167 03170 The Alerter service had a problem creating the list of 03170 alert recipients. The error code is ***. 03170 EXPLANATION 03170 03170 A software error occurred. 03170 03170 ACTION 03170 03170 Contact technical support. 03170 03171 There was an error expanding *** as a group name. Try 03171 splitting the group into two or more smaller groups. 03171 EXPLANATION 03171 03171 This message should occur only on a down-level computer. Any action to correct 03171 the problem should be performed on that computer. 03171 An error occurred when LAN Manager tried to identify the members of the 03171 specified group. The group is probably too large. 03171 03171 ACTION 03171 03171 Split the group into two or more smaller groups. 03171 03172 There was an error sending *** the alert message - 03172 ( 03172 *** ) 03172 The error code is ***. 03172 EXPLANATION 03172 03172 An error occurred when an alert message was sent. The user name designated to 03172 receive the alert may no longer exist. 03172 03172 ACTION 03172 03172 Use Server Manager to repair the error. 03172 03173 There was an error in creating or reading the alerter mailslot. 03173 The error code is ***. 03173 EXPLANATION 03173 03173 A software error occurred. 03173 03173 ACTION 03173 03173 Verify that the Alerter service has been started. If the service has already 03173 been started, contact technical support. 03173 03174 The server could not read the AT schedule file. 03174 EXPLANATION 03174 03174 This message should occur only on a down-level computer. Any action to correct 03174 the problem should be performed on that computer. 03174 LAN Manager cannot read the schedule file because the file is damaged. 03174 03174 ACTION 03174 03174 Restore the schedule file from a backup copy, if you have one. If not, delete 03174 the file and create a new one with the AT utility. 03174 03175 The server found an invalid AT schedule record. 03175 EXPLANATION 03175 03175 This message should occur only on a down-level computer. Any action to correct 03175 the problem should be performed on that computer. 03175 The schedule file contains a record with an invalid format. 03175 03175 ACTION 03175 03175 Restore the schedule file from a backup copy. If you do not have one, delete 03175 the AT schedule file and create a new one with the AT utility. 03175 03176 The server could not find an AT schedule file so it created one. 03176 EXPLANATION 03176 03176 This message should occur only on a down-level computer. Any action to correct 03176 the problem should be performed on that computer. 03176 The server created a schedule file. 03176 03176 ACTION 03176 03176 No action is needed. 03176 03177 The server could not access the *** network with NetBiosOpen. 03177 EXPLANATION 03177 03177 This message should occur only on a down-level computer. Any action to correct 03177 the problem should be performed on that computer. 03177 The server could not start one of its networks. 03177 03177 ACTION 03177 03177 Be sure that each network listed in the SRVNETS entry in the server's 03177 configuration file has a corresponding entry in the [networks] section of the 03177 configuration file. 03177 03178 The AT command processor could not run ***. 03178 EXPLANATION 03178 03178 This message should occur only on a down-level computer. Any action to correct 03178 the problem should be performed on that computer. 03178 You used the AT utility to specify a program that could not run. 03178 03178 ACTION 03178 03178 Check the filename of the program you tried to schedule. If it is in a 03178 directory that is not on the computer's search path, be sure to specify its 03178 full path. 03178 03178 Be sure that all programs you schedule are executable. 03178 03180 WARNING: Because of a lazy-write error, drive *** now 03180 contains some corrupted data. The cache is stopped. 03180 EXPLANATION 03180 03180 This message should occur only on a down-level computer. Any action to correct 03180 the problem should be performed on that computer. 03180 An error occurred when the lazy-write process tried to write to the specified 03180 hard disk. 03180 03180 ACTION 03180 03180 Run CHKDSK on the specified drive to check for problems with the disk or the 03180 files affected by the lazy-write process. 03180 03181 A defective sector on drive *** has been replaced (hotfixed). 03181 No data was lost. You should run CHKDSK soon to restore full 03181 performance and replenish the volume's spare sector pool. 03181 03181 The hotfix occurred while processing a remote request. 03181 EXPLANATION 03181 03181 This message should occur only on a down-level computer. Any action to correct 03181 the problem should be performed on that computer. 03181 The fault-tolerance system found a bad disk sector and rerouted data to a good 03181 sector (this is called hotfixing). No data was lost. 03181 03181 ACTION 03181 03181 Run CHKDSK soon to ensure that enough good disk sectors are available for 03181 hotfixing. 03181 03182 A disk error occurred on the HPFS volume in drive ***. 03182 The error occurred while processing a remote request. 03182 EXPLANATION 03182 03182 This message should occur only on a down-level computer. Any action to correct 03182 the problem should be performed on that computer. 03182 An error occurred during an operation on the listed disk because of problems 03182 with the disk. The operation probably did not succeed. 03182 03182 ACTION 03182 03182 Retry the operation. If the problem persists and you are unable to recover data 03182 from the disk, use backups of the affected files, if you have any. 03182 03183 The user accounts database (NET.ACC) is corrupted. The local security 03183 system is replacing the corrupted NET.ACC with the backup 03183 made at ***. 03183 Any updates made to the database after this time are lost. 03183 03183 EXPLANATION 03183 03183 This message should occur only on a down-level computer. Any action to correct 03183 the problem should be performed on that computer. 03183 The user accounts database file is damaged, so the backup file made at the 03183 listed date is now being used. Changes made to the user accounts database since 03183 this time were lost. Local security is still in effect. 03183 03183 ACTION 03183 03183 To update the user accounts database, retype changes made to it since the 03183 listed date. 03183 03184 The user accounts database (NET.ACC) is missing. The local 03184 security system is restoring the backup database 03184 made at ***. 03184 Any updates made to the database made after this time are lost. 03184 03184 EXPLANATION 03184 03184 This message should occur only on a down-level computer. Any action to correct 03184 the problem should be performed on that computer. 03184 The user accounts database file is missing, so the backup file made at the 03184 listed date is now being used. Changes made to the user accounts database since 03184 this time were lost. Local security is still in effect. 03184 03184 ACTION 03184 03184 To update the user accounts database, retype changes made to it since the 03184 listed date. 03184 03185 Local security could not be started because the user accounts database 03185 (NET.ACC) was missing or corrupted, and no usable backup 03185 database was present. 03185 03185 THE SYSTEM IS NOT SECURE. 03185 EXPLANATION 03185 03185 This message should occur only on a down-level computer. Any action to correct 03185 the problem should be performed on that computer. 03185 Local security could not start because the user accounts database file, 03185 NET.ACC, is missing or damaged and no backup file exists on the hard disk. 03185 03185 ACTION 03185 03185 Restore NET.ACC from a backup. The backup file will be named either NET.ACC or 03185 NETACC.BKP. Then restart the computer. 03185 03185 If there is no backup, reinstall LAN Manager using the Setup program. 03185 03186 Local security could not be started because an error 03186 occurred during initialization. The error code returned is ***. 03186 03186 THE SYSTEM IS NOT SECURE. 03186 03186 EXPLANATION 03186 03186 This message should occur only on a down-level computer. Any action to correct 03186 the problem should be performed on that computer. 03186 Local security could not start because of the listed error. 03186 03186 ACTION 03186 03186 Find and correct the cause of the listed error, and then restart the computer. 03186 03190 A NetWksta internal error has occurred: 03190 *** 03190 EXPLANATION 03190 03190 This message should occur only on a down-level computer. Any action to correct 03190 the problem should be performed on that computer. 03190 A software error occurred. 03190 03190 ACTION 03190 03190 Contact technical support. 03190 03191 The redirector is out of a resource: ***. 03191 EXPLANATION 03191 03191 This message should occur only on a down-level computer. Any action to correct 03191 the problem should be performed on that computer. 03191 The workstation is out of the specified resource. 03191 03191 ACTION 03191 03191 Adjust the workstation's configuration file to increase the amount of this 03191 resource. If you need assistance, contact your network administrator. 03191 03192 A server message block (SMB) error occurred on the connection to ***. 03192 The SMB header is the data. 03192 EXPLANATION 03192 03192 This message should occur only on a down-level computer. Any action to correct 03192 the problem should be performed on that computer. 03192 An error occurred on a request that was sent to the specified 03192 server. The workstation may have been connected to a resource that is no longer 03192 shared. 03192 03192 ACTION 03192 03192 Ask a network administrator to reshare the resource so that you can use it. 03192 03192 If this solution fails, contact technical support. 03192 03193 A virtual circuit error occurred on the session to ***. 03193 The network control block (NCB) command and return code is the data. 03193 EXPLANATION 03193 03193 This message should occur only on a down-level computer. Any action to correct 03193 the problem should be performed on that computer. 03193 The connection between your workstation and the specified server was 03193 unexpectedly broken. The server may have been restarted or a network problem 03193 may have occurred. 03193 03193 ACTION 03193 03193 If the server was restarted, retry the operation to reestablish the connection. 03193 03193 If you need more assistance, contact technical support. 03193 This message displays a network control block (NCB) value and the NCB error 03193 that was returned. Save this information for technical support. 03193 03194 Hanging up a stuck session to ***. 03194 EXPLANATION 03194 03194 This message should occur only on a down-level computer. Any action to correct 03194 the problem should be performed on that computer. 03194 The session with the specified server was ended because the server stopped 03194 responding. 03194 03194 ACTION 03194 03194 Ask your network administrator if the server is running. If so, reconnect to 03194 the server. 03194 03194 The amount of time a workstation waits for a server 03194 to respond to a request is determined by the SESSTIMEOUT entry in the 03194 workstation's configuration file. If your sessions with servers are frequently 03194 ended by this error, you may want to increase the value of SESSTIMEOUT. 03194 If you need assistance, contact your administrator. 03194 03195 A network control block (NCB) error occurred (***). 03195 The NCB is the data. 03195 EXPLANATION 03195 03195 This message should occur only on a down-level computer. Any action to correct 03195 the problem should be performed on that computer. 03195 An unexpected network control block (NCB) error occurred 03195 on the session with the specified server. The server may have been restarted, 03195 or a network problem may have occurred. 03195 03195 ACTION 03195 03195 Ask your network administrator if the server was recently restarted. 03195 03195 If you need more assistance, contact technical support. This message displays 03195 an NCB value and the NCB error that was returned. Save this information for 03195 technical support. 03195 03196 A write operation to *** failed. 03196 Data may have been lost. 03196 EXPLANATION 03196 03196 This message should occur only on a down-level computer. Any action to correct 03196 the problem should be performed on that computer. 03196 An attempt to write data to a file failed. 03196 03196 ACTION 03196 03196 See if the specified disk is full. Also be sure that you have write permission 03196 for the target file. 03196 03197 Reset of driver *** failed to complete the network control block (NCB). 03197 The NCB is the data. 03197 EXPLANATION 03197 03197 This message should occur only on a down-level computer. Any action to correct 03197 the problem should be performed on that computer. 03197 The specified NetBIOS driver found a problem that 03197 required the network adapter card to be reset. Resetting the card did not solve 03197 the problem. 03197 03197 ACTION 03197 03197 Contact technical support. 03197 03198 The amount of resource *** requested was more 03198 than the maximum. The maximum amount was allocated. 03198 EXPLANATION 03198 03198 This message should occur only on a down-level computer. Any action to correct 03198 the problem should be performed on that computer. 03198 The amount of the listed resource requested was more than the maximum. The 03198 maximum amount was allocated. 03198 03198 ACTION 03198 03198 Ask your network administrator check the workstation's configuration. 03198 03204 The server could not create a thread. 03204 The THREADS parameter in the CONFIG.SYS file should be increased. 03204 EXPLANATION 03204 03204 This message should occur only on a down-level computer. Any action to correct 03204 the problem should be performed on that computer. 03204 The server was unable to create a thread. 03204 03204 ACTION 03204 03204 Increase the value of the THREADS entry in the server's CONFIG.SYS file. The 03204 range for this value is 64 to 512. 03204 03205 The server could not close ***. 03205 The file is probably corrupted. 03205 EXPLANATION 03205 03205 This message should occur only on a down-level computer. Any action to correct 03205 the problem should be performed on that computer. 03205 The server found an error while closing the listed file. 03205 03205 ACTION 03205 03205 The file may be damaged. If it is, restore it from a backup copy. 03205 03206 The replicator cannot update directory ***. It has tree integrity 03206 and is the current directory for some process. 03206 EXPLANATION 03206 03206 A directory cannot be replicated when it is the current directory of a process 03206 and its value for INTEGRITY is TREE. 03206 03206 ACTION 03206 03206 For the directory to be replicated, be sure it is not the current directory of 03206 any process. 03206 03207 The server cannot export directory *** to client ***. 03207 It is exported from another server. 03207 EXPLANATION 03207 03207 This server found that another server is exporting the listed directory to the 03207 listed import server. 03207 03207 ACTION 03207 03207 Be sure that only one computer is configured as the export server of this 03207 directory for the listed import computer. Check the EXPORTLIST and EXPORTPATH 03207 entries in the configuration files of the export servers and the IMPORTLIST and 03207 IMPORTPATH entries 03207 in 03207 03207 the configuration file of the import server. 03207 03208 The replication server could not update directory *** from the source 03208 on *** due to error ***. 03208 EXPLANATION 03208 03208 An error prevented this server from updating the listed directory from the 03208 export server. The directory cannot be updated until the problem is corrected. 03208 03208 ACTION 03208 03208 Copy the files manually, if necessary, and investigate the cause of the listed 03208 error. 03208 03209 Master *** did not send an update notice for directory *** at the expected 03209 time. 03209 EXPLANATION 03209 03209 This server's Replicator service lost contact with 03209 the export server for the listed directory. 03209 03209 ACTION 03209 03209 Be sure the Server and Replicator services are running on the export server. 03209 03210 Failed to authenticate with ***, a Windows NT or Windows 2000 domain controller 03210 for domain ***. 03210 EXPLANATION 03210 03210 This server was denied access to the security database by the domain 03210 controller. Until this problem is corrected, the server cannot synchronize user 03210 account information with the domain controller. 03210 03210 ACTION 03210 03210 Stop and restart the Netlogon service at this server. 03210 03211 The replicator attempted to log on at *** as *** and failed. 03211 EXPLANATION 03211 03211 This message should occur only on a down-level computer. Any action to correct 03211 the problem should be performed on that computer. 03211 The Replicator service was denied access to the listed export server. Until 03211 this problem is corrected, the replicator cannot update the local copies of 03211 files exported by that server. 03211 03211 ACTION 03211 03211 Be sure that the local computer has an account on the export server. 03211 The user name and password for this account are specified by the LOGON and 03211 PASSWORD entries in the local computer's configuration file. If there is no 03211 LOGON entry, then the local computer name is the user name and no password is 03211 necessary. 03211 03212 Network error *** occurred. 03212 EXPLANATION 03212 03212 The Replicator service stopped because the listed Windows NT error occurred. 03212 03212 ACTION 03212 03212 To see more information about the error, type: 03212 03212 NET HELPMSG message# 03212 03212 where message# is the error number. 03212 03213 Replicator limit for files in a directory has been exceeded. 03213 EXPLANATION 03213 03213 This message should occur only on a down-level computer. Any action to correct 03213 the problem should be performed on that computer. 03213 A directory that is being replicated can have no more than 200 files. 03213 03213 ACTION 03213 03213 Remove files from the directory until 200 or fewer remain. 03213 03214 Replicator limit for tree depth has been exceeded. 03214 EXPLANATION 03214 03214 This message should occur only on a down-level computer. Any action to correct 03214 the problem should be performed on that computer. 03214 The replication tree can be no more than 32 levels deep. 03214 03214 ACTION 03214 03214 Reorganize the replicated directories so that no path is more than 32 levels 03214 deep. 03214 03215 Unrecognized message received in mailslot. 03215 EXPLANATION 03215 03215 A software error occurred. 03215 03215 ACTION 03215 03215 Contact technical support. 03215 03216 System error *** occurred. 03216 EXPLANATION 03216 03216 The Replicator service stopped because the listed system error occurred. 03216 03216 ACTION 03216 03216 Check the cause of the system error. 03216 03217 Cannot log on. User is currently logged on and argument TRYUSER 03217 is set to NO. 03217 EXPLANATION 03217 03217 This message should occur only on a down-level computer. Any action to correct 03217 the problem should be performed on that computer. 03217 The computer cannot update its copies of the replicated files while a user is 03217 logged on and the TRYUSER option is set to NO. 03217 03217 ACTION 03217 03217 No action is needed. The computer will update the files when no user is logged 03217 on. 03217 03217 To have the local computer update files while users are logged on, change the 03217 value of the TRYUSER entry in the [replicator] section of the configuration 03217 file to YES. 03217 03218 IMPORT path *** cannot be found. 03218 EXPLANATION 03218 03218 The import path specified either from the command line or in the configuration 03218 file, does not exist. 03218 03218 ACTION 03218 03218 Check the spelling of the IMPORTPATH entry in the configuration file. This 03218 entry must specify a directory that exists. 03218 03219 EXPORT path *** cannot be found. 03219 EXPLANATION 03219 03219 This message should occur only on a down-level computer. Any action to correct 03219 the problem should be performed on that computer. 03219 The specified export path does not exist. 03219 03219 ACTION 03219 03219 Check the spelling of the EXPORTPATH entry in the configuration file. This 03219 entry must specify a directory that exists. 03219 03220 Replicator failed to update signal file in directory *** due to 03220 *** system error. 03220 EXPLANATION 03220 03220 This message should occur only on a down-level computer. Any action to correct 03220 the problem should be performed on that computer. 03220 The listed system error caused the Replicator service to fail to update its 03220 status. 03220 03220 ACTION 03220 03220 Check the cause of the system error. 03220 03221 Disk Fault Tolerance Error 03221 03221 *** 03221 EXPLANATION 03221 03221 This message should occur only on a down-level computer. Any action to correct 03221 the problem should be performed on that computer. 03221 An error was recorded by the fault-tolerance system. 03221 The error is explained in the original error message. 03221 03221 ACTION 03221 03221 Follow the action recommended in the original message. 03221 03222 Replicator could not access *** 03222 on *** due to system error ***. 03222 EXPLANATION 03222 03222 Because of the listed system error, the Replicator service could not access a 03222 file on the listed export server. 03222 03222 ACTION 03222 03222 Be sure the Replicator service's account on the export server has permission to 03222 read the directories being replicated. The name of this account can be 03222 displayed and changed using the Services option in Computer Management System 03222 Tools. 03222 03222 03223 The primary domain controller for domain *** has apparently failed. 03223 EXPLANATION 03223 03223 The domain controller for this domain has stopped. 03223 03223 ACTION 03223 03223 Wait a few minutes and then restart the domain controller. 03223 03223 If this is not possible, you have the option of promoting another server to be 03223 the domain controller. 03223 03224 Changing machine account password for account *** failed with 03224 the following error: 03224 *** 03224 EXPLANATION 03224 03224 This server found an error while changing the computer's password at the domain 03224 controller. 03224 03224 ACTION 03224 03224 If you are using Windows NT Workstation, ask your network administrator to set 03224 your computer value back to the default value. Then, using the System option in 03224 Control Panel, leave and rejoin the domain. 03224 If you are using Windows NT Server, use the Synchronize With Domain option in 03224 Server Manager to synchronize the servers. 03224 03225 An error occurred while updating the logon or logoff information for ***. 03225 EXPLANATION 03225 03225 This message should occur only on a down-level computer. Any action to correct 03225 the problem should be performed on that computer. 03225 The current logon statistics may not be accurate because an error occurred 03225 while logon and logoff information was being updated. 03225 03225 ACTION 03225 03225 No action is needed. 03225 03226 An error occurred while synchronizing with primary domain controller *** 03226 EXPLANATION 03226 03226 The local copy of the security database may be out of synchronization with that 03226 of the domain controller because an error occurred while the database was being 03226 updated. 03226 03226 ACTION 03226 03226 Use the Synchronize With Domain option in Server Manager to synchronize the 03226 security databases. 03226 03226 03227 The session setup to the Windows NT or Windows 2000 Domain Controller *** for 03227 the domain *** 03227 failed because *** does not support signing or sealing the Netlogon 03227 session. 03227 03227 Either upgrade the Domain controller or set the RequireSignOrSeal 03227 registry entry on this machine to 0. 03230 A power failure was detected at the server. 03230 EXPLANATION 03230 03230 The server had a power failure. 03230 03230 ACTION 03230 03230 The UPS service is shutting down the server. Stop applications that are running 03230 on the server and 03230 have users disconnect from the server. 03230 03231 The UPS service performed server shut down. 03231 EXPLANATION 03231 03231 The UPS battery is low, probably because of an extended power outage. 03231 03231 ACTION 03231 03231 No action is needed. The system will start automatically when power is 03231 restored. 03231 03232 The UPS service did not complete execution of the 03232 user specified shut down command file. 03232 EXPLANATION 03232 03232 This message should occur only on a down-level computer. Any action to correct 03232 the problem should be performed on that computer. 03232 The UPS service could not finish running the specified command file in less 03232 than 30 seconds. 03232 03232 ACTION 03232 03232 Modify the contents of the command file so that it can be completed in 30 03232 seconds or less. 03232 03233 The UPS driver could not be opened. The error code is 03233 the data. 03233 EXPLANATION 03233 03233 This message should occur only on a down-level computer. Any action to correct 03233 the problem should be performed on that computer. 03233 The UPS service could not access the UPS driver (UPSDRV.OS2). The UPS driver 03233 might not be configured properly. 03233 03233 ACTION 03233 03233 Be sure that your CONFIG.SYS file has a DEVICE line specifying the location of 03233 the UPS device driver and that the /PORT option of that line specifies the 03233 serial port that the battery is connected to. 03233 03233 If you make changes to CONFIG.SYS, you must restart your system for them to 03233 take effect. 03233 03234 Power has been restored. 03235 There is a problem with a configuration of user specified 03235 shut down command file. 03236 The UPS service failed to execute a user specified shutdown 03236 command file ***. The error code is the data. 03250 Initialization failed because of an invalid or missing 03250 parameter in the configuration file ***. 03250 EXPLANATION 03250 03250 This message should occur only on a down-level computer. Any action to correct 03250 the problem should be performed on that computer. 03250 The Remoteboot service could not start because the listed entry was missing 03250 from the configuration file. 03250 03250 ACTION 03250 03250 Add the listed entry to the server's configuration file. 03250 03251 Initialization failed because of an invalid line in the 03251 configuration file ***. The invalid line is the data. 03251 EXPLANATION 03251 03251 This message should occur only on a down-level computer. Any action to correct 03251 the problem should be performed on that computer. 03251 The Remoteboot service could not start because of an invalid line in the listed 03251 configuration file. 03251 03251 ACTION 03251 03251 Check the listed line. 03251 03252 Initialization failed because of an error in the configuration 03252 file ***. 03252 EXPLANATION 03252 03252 This message should occur only on a down-level computer. Any action to correct 03252 the problem should be performed on that computer. 03252 The Remoteboot service failed to start because of an error in the listed 03252 configuration file. 03252 03252 ACTION 03252 03252 Check the listed file. 03252 03253 The file *** has been changed after initialization. 03253 The boot-block loading was temporarily terminated. 03253 EXPLANATION 03253 03253 This message should occur only on a down-level computer. Any action to correct 03253 the problem should be performed on that computer. 03253 The listed file was changed after the Remoteboot service was started. Loading 03253 the boot-block stopped temporarily. 03253 03253 ACTION 03253 03253 Stop and restart the Remoteboot service. 03253 03254 The files do not fit to the boot-block configuration 03254 file ***. Change the BASE and ORG definitions or the order 03254 of the files. 03254 EXPLANATION 03254 03254 This message should occur only on a down-level computer. Any action to correct 03254 the problem should be performed on that computer. 03254 The files in the listed boot-block definition file do not fit in the boot 03254 block. 03254 03254 ACTION 03254 03254 Change the order of the files or the value of BASE or ORG. 03254 03255 Initialization failed because the dynamic-link 03255 library *** returned an incorrect version number. 03255 EXPLANATION 03255 03255 This message should occur only on a down-level computer. Any action to correct 03255 the problem should be performed on that computer. 03255 The Remoteboot service could not start because the listed dynamic-link library 03255 returned the incorrect version number. 03255 03255 ACTION 03255 03255 Be sure you are using the correct versions of the dynamic-link libraries. 03255 03256 There was an unrecoverable error in the dynamic- 03256 link library of the service. 03256 EXPLANATION 03256 03256 This message should occur only on a down-level computer. Any action to correct 03256 the problem should be performed on that computer. 03256 An unrecoverable error occurred because of a problem with the dynamic-link 03256 library of the Remoteboot service. 03256 03256 ACTION 03256 03256 Be sure you are using the correct versions of the dynamic-link libraries. 03256 03257 The system returned an unexpected error code. 03257 The error code is the data. 03257 EXPLANATION 03257 03257 The system returned an unexpected error code. The error code 03257 is in the data. 03257 03257 ACTION 03257 03257 Check the cause of the error. 03257 03258 The fault-tolerance error log file, LANROOT\LOGS\FT.LOG, 03258 is more than 64K. 03258 EXPLANATION 03258 03258 This message should occur only on a down-level computer. Any action to correct 03258 the problem should be performed on that computer. 03258 The fault-tolerance system error log is larger than 64K. 03258 03258 ACTION: 03258 03258 Run FTADMIN to fix any existing errors and clear them from the error log. 03258 03259 The fault-tolerance error-log file, LANROOT\LOGS\FT.LOG, had the 03259 update in progress bit set upon opening, which means that the 03259 system crashed while working on the error log. 03259 EXPLANATION 03259 03259 This message should occur only on a down-level computer. Any action to correct 03259 the problem should be performed on that computer. 03259 The server crashed while accessing the fault-tolerance error log, possibly 03259 damaging that log. The damaged fault-tolerance error log was cleared after its 03259 contents were backed up to LANMAN\LOGS\FT.ERR. 03259 03259 ACTION 03259 03259 No action is needed. 03299 *** *** *** *** *** *** *** *** ***. 03301 Remote IPC 03302 Remote Admin 03303 Logon server share 03304 A network error occurred. 03400 There is not enough memory to start the Workstation service. 03400 EXPLANATION 03400 03400 This message should occur only on a down-level computer. Any action to correct 03400 the problem should be performed on that computer. 03400 The computer does not have enough memory available to start the Workstation 03400 service. 03400 03400 ACTION 03400 03400 Stop other applications that are running on the computer, and then start the 03400 Workstation service again. 03400 03400 03400 03401 An error occurred when reading the NETWORKS entry in the LANMAN.INI file. 03401 EXPLANATION 03401 03401 This message should occur only on a down-level computer. Any action to correct 03401 the problem should be performed on that computer. 03401 LAN Manager could not read the entries in the [networks] section of the 03401 LANMAN.INI file. 03401 03401 ACTION 03401 03401 Be sure that the LANMAN.INI file exists (in the LANMAN directory). Check the 03401 format of the entries in the [networks] section. 03401 03402 This is an invalid argument: ***. 03402 EXPLANATION 03402 03402 This message should occur only on a down-level computer. Any action to correct 03402 the problem should be performed on that computer. 03402 The listed variable or option (from an entry in the [networks] section of the 03402 LANMAN.INI file) is invalid. 03402 03402 ACTION 03402 03402 Check the format of the entries in the [networks] section of the LANMAN.INI 03402 file. 03402 03403 The *** NETWORKS entry in the LANMAN.INI file has a 03403 syntax error and will be ignored. 03403 EXPLANATION 03403 03403 This message should occur only on a down-level computer. Any action to correct 03403 the problem should be performed on that computer. 03403 The listed entry in the [networks] section of the LANMAN.INI file has a syntax 03403 error. 03403 03403 ACTION 03403 03403 Check the format of the listed entry. 03403 03404 There are too many NETWORKS entries in the LANMAN.INI file. 03404 EXPLANATION 03404 03404 This message should occur only on a down-level computer. Any action to correct 03404 the problem should be performed on that computer. 03404 The LANMAN.INI file cannot have more than 12 entries in the [networks] section. 03404 03404 ACTION 03404 03404 Remove entries from the [networks] section until 12 or fewer remain. 03404 03406 An error occurred when opening network 03406 device driver *** = ***. 03406 EXPLANATION 03406 03406 This message should occur only on a down-level computer. Any action to correct 03406 the problem should be performed on that computer. 03406 The listed device driver could not be installed. 03406 03406 ACTION 03406 03406 Check that the listed entry in the [networks] section of the LANMAN.INI file is 03406 valid. 03406 03406 In the CONFIG.SYS file, check the DEVICE entry that loads this device 03406 driver--the parameters of that entry may not be correct. 03406 03406 Also check that the DEVICE entry specifies the correct path of the device 03406 driver. 03406 03407 Device driver *** sent a bad BiosLinkage response. 03407 EXPLANATION 03407 03407 This message should occur only on a down-level computer. Any action to correct 03407 the problem should be performed on that computer. 03407 The device driver specified is incorrect. It may be incompatible with the 03407 network adapter card, or it may be out-of-date. 03407 03407 ACTION 03407 03407 Use a different device driver. 03407 03408 The program cannot be used with this operating system. 03408 EXPLANATION 03408 03408 Your computer has an incorrect version of the operating system. 03408 03408 ACTION 03408 03408 Upgrade your computer to the latest version of Windows NT. 03408 03409 The redirector is already installed. 03409 EXPLANATION 03409 03409 This message should occur only on a down-level computer. Any action to correct 03409 the problem should be performed on that computer. 03409 The redirector is already installed. 03409 03409 ACTION 03409 03409 No action is needed. 03409 03410 Installing NETWKSTA.SYS Version ***.***.*** (***) 03410 03411 There was an error installing NETWKSTA.SYS. 03411 03411 Press ENTER to continue. 03411 EXPLANATION 03411 03411 This message should occur only on a down-level computer. Any action to correct 03411 the problem should be performed on that computer. 03411 The LAN Manager device driver NETWKSTA.SYS could not be installed. 03411 03411 ACTION 03411 03411 Another error message that contains a more detailed explanation of the error, 03411 should have been displayed prior to this message. See that message for the 03411 cause of the problem. 03411 03412 Resolver linkage problem. 03412 EXPLANATION 03412 03412 This message should occur only on a down-level computer. Any action to correct 03412 the problem should be performed on that computer. 03412 An internal error occurred. 03412 03412 ACTION 03412 03412 Contact technical support. 03413 Your logon time at *** ends at ***. 03413 Please clean up and log off. 03414 You will be automatically disconnected at ***. 03415 Your logon time at *** has ended. 03416 Your logon time at *** ended at ***. 03417 WARNING: You have until *** to logoff. If you 03417 have not logged off at this time, your session will be 03417 disconnected, and any open files or devices you 03417 have open may lose data. 03418 WARNING: You must log off at *** now. You have 03418 two minutes to log off, or you will be disconnected. 03419 You have open files or devices, and a forced 03419 disconnection may cause you to lose data. 03420 Default Share for Internal Use 03421 Messenger Service 03500 The command completed successfully. 03501 You used an invalid option. 03501 EXPLANATION 03501 03501 You typed an invalid command option. 03501 03501 ACTION 03501 03501 To see a list of options for this command, type: 03501 03501 NET HELP command 03501 03501 When typing commands, remember that most options must be preceded with a slash, 03501 as in /DELETE. 03501 03502 System error *** has occurred. 03502 EXPLANATION 03502 03502 The specified system error occurred. 03502 03502 ACTION 03502 03502 Correct the problem and retype the command. 03502 03503 The command contains an invalid number of arguments. 03503 EXPLANATION 03503 03503 The command has an invalid number of options or variables. 03503 03503 ACTION 03503 03503 To see the syntax of this command, type: 03503 03503 NET HELP command 03503 03503 03504 The command completed with one or more errors. 03504 EXPLANATION 03504 03504 The command tried to perform multiple tasks and some of them could not be 03504 completed. 03504 03504 ACTION 03504 03504 No action is needed. 03504 03505 You used an option with an invalid value. 03505 EXPLANATION 03505 03505 You typed an incorrect value for a command option. 03505 03505 ACTION 03505 03505 To see the syntax of this command and its options, type: 03505 03505 NET HELP command /OPTIONS 03505 03506 The option *** is unknown. 03506 EXPLANATION 03506 03506 The specified option is invalid. 03506 03506 ACTION 03506 03506 Check the spelling of the option you typed. 03506 03506 To see a list of options for this command, type: 03506 03506 NET HELP command 03506 03507 Option *** is ambiguous. 03507 EXPLANATION 03507 03507 The specified option can be confused with other options. 03507 03507 ACTION 03507 03507 Type enough letters of the option so that it is unambiguous. 03507 If the command has two options that both begin with /OPT, such as /OPT and 03507 /OPTION, you must type at least four letters to designate the second option. 03507 To see a list of options for this command, type: 03507 03507 NET HELP command 03507 03510 A command was used with conflicting switches. 03510 EXPLANATION 03510 03510 You typed a command with two options that conflict, such as /YES and /NO. 03510 03510 ACTION 03510 03510 Retype the command without contradictory options. 03510 03511 Could not find subprogram ***. 03511 EXPLANATION 03511 03511 The specified program file could not be found. 03511 03511 ACTION 03511 03511 Check that the program is in the same directory as NET.EXE, which is usually in 03511 your system directory. 03511 03512 The software requires a newer version of the operating 03512 system. 03512 EXPLANATION 03512 03512 This message should occur only on a down-level computer. Any action to correct 03512 the problem should be performed on that computer. 03512 The software you are attempting to run requires a more recent version of the 03512 operating system. 03512 03512 ACTION 03512 03512 Run the software using a more recent version of the operating system. 03512 03513 More data is available than can be returned by Windows 2000. 03513 EXPLANATION 03513 03513 Windows NT could not display all available data. 03513 03513 ACTION 03513 03513 The action required depends on the command that returned the error. Contact 03513 your network administrator. 03513 03514 More help is available by typing NET HELPMSG ***. 03515 This command can be used only on a Windows 2000 Domain Controller. 03515 EXPLANATION 03515 03515 This command can be used only on a Windows NT Server system. 03515 03515 ACTION 03515 03515 Redo the operation on a Windows NT Server system. 03515 03516 This command cannot be used on a Windows 2000 Domain Controller. 03520 These Windows 2000 services are started: 03521 The *** service is not started. 03522 The *** service is starting 03523 The *** service could not be started. 03524 The *** service was started successfully. 03525 Stopping the Workstation service also stops the Server service. 03526 The workstation has open files. 03527 The *** service is stopping 03528 The *** service could not be stopped. 03529 The *** service was stopped successfully. 03530 The following services are dependent on the *** service. 03530 Stopping the *** service will also stop these services. 03533 The service is starting or stopping. Please try again later. 03533 EXPLANATION 03533 03533 This task cannot be performed while the service is starting or stopping. 03533 03533 ACTION 03533 03533 Try the task later. 03533 03533 03534 The service did not report an error. 03534 EXPLANATION 03534 03534 The service did not report an error. 03534 03534 ACTION 03534 03534 Try the task later. If the problem persists, contact your network 03534 administrator. 03534 03535 An error occurred controlling the device. 03536 The *** service was continued successfully. 03537 The *** service was paused successfully. 03538 The *** service failed to resume. 03539 The *** service failed to pause. 03540 The *** service continue is pending 03541 The *** service pause is pending 03542 *** was continued successfully. 03543 *** was paused successfully. 03544 The *** service has been started by another process and is pending. 03547 A service specific error occurred: ***. 03547 EXPLANATION 03547 03547 A service-specific error occurred. 03547 03547 ACTION 03547 03547 Refer to the Help or documentation for that service to determine the problem. 03547 03660 These workstations have sessions on this server: 03661 These workstations have sessions with open files on this server: 03666 The message alias is forwarded. 03670 You have these remote connections: 03671 Continuing will cancel the connections. 03675 The session from *** has open files. 03676 New connections will be remembered. 03677 New connections will not be remembered. 03678 An error occured while saving your profile. The state of your remembered 03678 connections has not changed. 03679 An error occured while reading your profile. 03680 An error occurred while restoring the connection to ***. 03682 No network services are started. 03683 There are no entries in the list. 03688 Users have open files on ***. Continuing the operation will force the files 03688 closed. 03689 The Workstation service is already running. Windows 2000 will ignore command 03689 options for the workstation. 03691 There are open files and/or incomplete directory searches pending on the 03691 connection to ***. 03693 The request will be processed at a domain controller for domain ***. 03694 The shared queue cannot be deleted while a print job is being spooled to the 03694 queue. 03694 EXPLANATION 03694 03694 This message should occur only on a down-level computer. Any action to correct 03694 the problem should be performed on that computer. 03694 You attempted to delete an active printer. 03694 03694 ACTION 03694 03694 After the current job has finished spooling, either print or delete the job. 03694 Then delete the printer. 03694 03695 *** has a remembered connection to ***. 03710 An error occurred while opening the Help file. 03710 EXPLANATION 03710 03710 Windows NT could not find a file of Help information. 03710 03710 ACTION 03710 03710 Be sure the NET.HLP file is in the same directory as NET.EXE, which is usually 03710 in your system directory. This directory should also be on your search path 03710 (specified by the PATH command). 03710 03710 If you cannot find the Help file on your computer, contact your network 03710 administrator. Your administrator should copy the Help file from the Windows NT 03710 distribution disks to your computer. 03710 03711 The Help file is empty. 03711 EXPLANATION 03711 03711 Help file, NET.HLP, is damaged. The file is usually in your system directory. 03711 03711 ACTION 03711 03711 Contact your network administrator. Your administrator should copy the Help 03711 file from the Windows NT distribution disks to your computer. 03711 03711 If the problem persists, contact technical support. 03711 03712 The Help file is corrupted. 03712 EXPLANATION 03712 03712 Help file, NET.HLP, is damaged. The file is usually in your system directory. 03712 03712 ACTION 03712 03712 Contact your network administrator. Your administrator should copy the Help 03712 file from the Windows NT distribution disks to your computer. 03712 03712 If the problem persists, contact technical support. 03712 03713 Could not find a domain controller for domain ***. 03713 EXPLANATION 03713 03713 Either this domain does not have logon security and therefore does not have a 03713 domain controller, or its domain controller is currently unavailable. 03713 03713 ACTION 03713 03713 If this domain does not have logon security, you cannot use this domain. 03713 Otherwise, retry the command. If the problem persists, ask your network 03713 administrator if the domain controller is running. 03713 03714 This operation is privileged on systems with earlier 03714 versions of the software. 03714 EXPLANATION 03714 03714 This message should occur only on a down-level computer. Any action to correct 03714 the problem should be performed on that computer. 03714 You must have administrative privilege on the remote computer to perform this 03714 task because that computer is running a previous version of LAN Manager. 03714 03714 ACTION 03714 03714 To complete this task, ask your administrator to give you administrative 03714 privilege on the remote computer, or have that computer upgraded to Windows 03714 NT. 03714 03716 The device type is unknown. 03716 EXPLANATION 03716 03716 You typed an invalid device name. 03716 03716 ACTION 03716 03716 Check the spelling of the device name. Valid device names are LPT1: to LPT9: 03716 for printers and A: to Z: for disk devices. 03716 03717 The log file has been corrupted. 03717 EXPLANATION 03717 03717 This message should occur only on a down-level computer. Any action to correct 03717 the problem should be performed on that computer. 03717 The log file you are using is damaged. 03717 03717 ACTION 03717 03717 If you may need to refer to this log file in the future, copy it to another 03717 filename, and then clear it so that you can start another one. 03717 03718 Program filenames must end with .EXE. 03718 EXPLANATION 03718 03718 This message should occur only on a down-level computer. Any action to correct 03718 the problem should be performed on that computer. 03718 The Netrun service runs only programs with the filename extension .EXE. 03718 03718 ACTION 03718 03718 To use a program with a .COM extension, an administrator must rename it to a 03718 .EXE file. 03718 03719 A matching share could not be found so nothing was deleted. 03719 EXPLANATION 03719 03719 Windows NT could not find the resource you wanted to 03719 stop sharing. 03719 03719 ACTION 03719 03719 Check the spelling of the share name. 03719 03719 To see a list of resources the server is sharing, type: 03719 03719 NET SHARE 03719 03720 A bad value is in the units-per-week field of the user record. 03720 EXPLANATION 03720 03720 This message should occur only on a down-level computer. Any action to correct 03720 the problem should be performed on that computer. 03720 The internal record of this user is invalid. 03720 03720 ACTION 03720 03720 Contact technical support. 03720 03721 The password is invalid for ***. 03721 EXPLANATION 03721 03721 You used an incorrect password. 03721 03721 ACTION 03721 03721 Check that you have the correct password, and then retype it. 03721 03721 If you cannot remember your password, see your network administrator to have 03721 your password changed. 03721 03722 An error occurred while sending a message to ***. 03722 EXPLANATION 03722 03722 An error occurred when a message was sent to the alias you selected. An 03722 additional error message should follow this one. It will tell you what action 03722 to take to correct the error. 03722 03722 ACTION 03722 03722 Follow the recommended action in the second error message. 03722 03723 The password or user name is invalid for ***. 03723 EXPLANATION 03723 03723 Either your password or your user name is incorrect. 03723 03723 ACTION 03723 03723 Retry the operation with the correct password or user name. 03723 03723 If you cannot remember your password, see your network administrator to have 03723 your password changed. 03723 03725 An error occurred when the share was deleted. 03725 EXPLANATION 03725 03725 An error occurred when Windows NT tried to stop sharing the resource. 03725 03725 ACTION 03725 03725 Try again to stop sharing the resource. 03725 03725 If no more information about this error is displayed, use Event Viewer to read 03725 the system log. 03725 03725 03725 If no more information appears in Event Viewer and the problem persists, 03725 contact technical support. 03725 03726 The user name is invalid. 03726 EXPLANATION 03726 03726 You typed an invalid user name. 03726 03726 ACTION 03726 03726 Retype the command with a valid user name. 03726 03727 The password is invalid. 03727 EXPLANATION 03727 03727 You typed an invalid password. 03727 03727 ACTION 03727 03727 Retype the command, using a valid password. 03727 03728 The passwords do not match. 03728 EXPLANATION 03728 03728 The two passwords you typed did not match. 03728 03728 ACTION 03728 03728 Be sure to type identical passwords. 03728 03729 Your persistent connections were not all restored. 03729 EXPLANATION 03729 03729 Loading of the profile stopped after an error occurred. 03729 03729 ACTION 03729 03729 No action is needed. 03729 03730 This is not a valid computer name or domain name. 03730 EXPLANATION 03730 03730 You typed an invalid computer name or domain. 03730 03730 ACTION 03730 03730 Retype the command with a valid computer name or domain. If you need further 03730 assistance, contact your network administrator. 03730 03732 Default permissions cannot be set for that resource. 03734 A valid password was not entered. 03734 EXPLANATION 03734 03734 You typed an invalid password. 03734 03734 ACTION 03734 03734 Type a valid password. 03734 03735 A valid name was not entered. 03735 EXPLANATION 03735 03735 You typed an invalid name. 03735 03735 ACTION 03735 03735 Type a valid name. 03735 03736 The resource named cannot be shared. 03736 EXPLANATION 03736 03736 You cannot share this resource. 03736 03736 ACTION 03736 03736 No action is needed. 03736 03737 The permissions string contains invalid permissions. 03738 You can only perform this operation on printers and communication devices. 03738 EXPLANATION 03738 03738 This command is valid only for device names of printers and communication 03738 devices. 03738 03738 ACTION 03738 03738 No action is needed. 03738 03742 *** is an invalid user or group name. 03742 EXPLANATION 03742 03742 You typed an invalid user name or group name. 03742 03742 ACTION 03742 03742 Check the spelling of the user or group name. To see a list of existing users, 03742 type: 03742 03742 NET USER 03742 03742 To see a list of existing local groups, type: 03742 03742 NET LOCALGROUP 03742 03742 To see a list of existing global groups, type: 03742 03742 NET GROUP 03742 03743 The server is not configured for remote administration. 03743 EXPLANATION 03743 03743 The server is not set up to be administered remotely. 03743 03743 ACTION 03743 03743 For the server to be administered remotely, you must share the server's ADMIN$ 03743 and IPC$ resources. 03743 03752 No users have sessions with this server. 03752 EXPLANATION 03752 03752 No users have sessions with this server. 03752 03752 ACTION 03752 03752 No action is needed. 03752 03753 User *** is not a member of group ***. 03753 EXPLANATION 03753 03753 This user is not a member of the group. 03753 03753 ACTION 03753 03753 No action is needed. 03753 03754 User *** is already a member of group ***. 03754 EXPLANATION 03754 03754 This user is already a member of the group. 03754 03754 ACTION 03754 03754 No action is needed. 03754 03755 There is no such user: ***. 03755 EXPLANATION 03755 03755 You typed an unknown user name. 03755 03755 ACTION 03755 03755 Check the spelling of the user name and then retype the command. 03755 03756 This is an invalid response. 03757 No valid response was provided. 03757 EXPLANATION 03757 03757 You did not provide a valid response to a Windows NT prompt. 03757 03757 ACTION 03757 03757 Type a valid response. 03757 03758 The destination list provided does not match the destination list of the 03758 printer queue. 03759 Your password cannot be changed until ***. 03760 *** is not a recognized day of the week. 03760 EXPLANATION 03760 03760 The day you specified is invalid. Valid days are Monday, Tuesday, Wednesday, 03760 Thursday, Friday, Saturday, and Sunday. 03760 03760 Valid abbreviations are M, T, W, Th, F, Sa, and Su. 03760 03760 ACTION 03760 03760 Retype the command, using valid names or abbreviations. 03760 03761 The time range specified ends before it starts. 03761 EXPLANATION 03761 03761 You specified a time range that starts later than it ends. 03761 Time ranges must start and end on the same day. 03761 03761 ACTION 03761 03761 Retype the command with a valid time range. 03761 03761 You can use either the 12-hour or the 24-hour time format. When you use the 03761 12-hour format, you must specify either AM or PM for each time. 03761 03761 When you use the 24-hour format, do not specify AM or PM. 03761 03762 *** is not a recognized hour. 03762 EXPLANATION 03762 03762 You specified an hour in a format that could not be recognized. The hour can be 03762 a number from 0 to 12 in 12-hour format or 0 to 24 in 24-hour format. If you 03762 use the 12-hour format, you must specify either AM or PM for each time. 03762 03762 ACTION 03762 03762 Retype the command with the correct hour format. 03762 03763 *** is not a valid specification for minutes. 03763 EXPLANATION 03763 03763 You specified the minutes in a format that could not be recognized. 03763 03763 Typing the minutes is optional, but if included, the format must be :00 (a 03763 colon and two zeros). 03763 03763 ACTION 03763 03763 Retype the command, either omitting the minutes or using the correct format 03763 (:00). 03763 03764 Time supplied is not exactly on the hour. 03764 EXPLANATION 03764 03764 03764 Specifying minutes in your logon command is optional, but if included, the 03764 minutes must be in the format :00 (a colon and two zeros). 03764 03764 ACTION 03764 03764 Retype the command, either omitting the minutes or using the correct format 03764 (:00). 03764 03765 12 and 24 hour time formats may not be mixed. 03765 EXPLANATION 03765 03765 You mixed 12- and 24-hour formats in your time specification. 03765 03765 If you use the 12-hour format (with AM and PM), the hours must be from 0 to 12. 03765 If you use 24-hour format, the hours must be from 0 to 24. 03765 03765 ACTION 03765 03765 Retype the command with either the 12- or 24-hour format. 03765 03766 *** is not a valid 12-hour suffix. 03766 EXPLANATION 03766 03766 You tried to use the 12-hour format, but the time was followed by text that was 03766 neither AM nor PM. 03766 03766 If you use the 12-hour format, you must follow each time with either AM, A.M., 03766 PM, or P.M. 03766 03766 ACTION 03766 03766 Retype the command with the correct forms of AM and PM. 03766 03767 An illegal date format has been supplied. 03767 EXPLANATION 03767 03767 You used an illegal date format. 03767 03767 ACTION 03767 03767 Retype the command with a correct date format. 03767 03767 Dates should be typed in the form mm/dd/yy or dd/mm/yy, depending on the user's 03767 country code. Months can be represented by a number, spelled out, or 03767 abbreviated to exactly 3 letters. Use commas or slashes to separate the parts 03767 of the date--do not use spaces. If you do not specify the year, Windows NT 03767 assumes it to be the next occurrence of the date. 03767 03768 An illegal day range has been supplied. 03768 EXPLANATION 03768 03768 You specified an illegal range of days. 03768 03768 You must also type a hyphen between the first and last days of each range. 03768 03768 ACTION 03768 03768 When specifying days, use only the complete names of 03768 the days or valid Windows NT abbreviations. Valid abbreviations are: 03768 03768 M, T, W, Th, F, Sa, Su 03768 03768 Use a hyphen to separate the beginning and 03768 end of each range of days. 03768 03769 An illegal time range has been supplied. 03769 EXPLANATION 03769 03769 You typed an invalid time range. 03769 03769 ACTION 03769 03769 Retype the command with a valid time range. Use either the 12-hour format, with 03769 the numbers 0-12 and AM and PM, or the 24-hour format, with the numbers 0-24. 03769 03769 Use a hyphen to separate the beginning and end of a time range, as in 9AM-4PM. 03769 03770 Arguments to NET USER are invalid. Check the minimum password 03770 length and/or arguments supplied. 03770 EXPLANATION 03770 03770 You typed invalid options or variables with the command. 03770 03770 ACTION 03770 03770 Retype the command, using valid options and variables. 03770 03770 When you add a user account, the password you set for the user must conform to 03770 your system's guidelines for password length. 03770 03771 The value for ENABLESCRIPT must be YES. 03771 EXPLANATION 03771 03771 The /ENABLESCRIPT option of the NET USER command accepts only YES as a value. 03771 03771 ACTION 03771 03771 Retype the command, either specifying /ENABLESCRIPT:YES or not specifying 03771 /ENABLESCRIPT. 03771 03773 An illegal country code has been supplied. 03773 EXPLANATION 03773 03773 You typed an invalid country code. 03773 03773 ACTION 03773 03773 Specify a valid country code. 03773 03774 The user was successfully created but could not be added 03774 to the USERS local group. 03774 EXPLANATION 03774 03774 The user was successfully created but could not be added to the USERS local 03774 group. 03774 03774 ACTION 03774 03774 Try deleting the user. Then add the user to the local group again. If the 03774 problem persists, contact technical support. 03774 03775 The user context supplied is invalid. 03775 EXPLANATION 03775 03775 The user context you supplied with /USER is invalid. 03775 03775 ACTION 03775 03775 Retype the command with a valid user context which may be a simple user name or 03775 a qualified user name (in the form DOMAIN\USERNAME). 03775 03776 The dynamic-link library *** could not be loaded, or an error 03776 occurred while trying to use it. 03776 EXPLANATION 03776 03776 A system dynamic-link library could not be loaded. 03776 03776 ACTION 03776 03776 Make sure the file specified is in your system directory. If it is not, contact 03776 your network administrator. 03776 03777 Sending files is no longer supported. 03777 EXPLANATION 03777 03777 The NET SEND command no longer sends files. 03777 03777 ACTION 03777 03777 Type the message you wish to send on the same line as NET SEND. 03777 03778 You may not specify paths for ADMIN$ and IPC$ shares. 03778 EXPLANATION 03778 03778 When you are creating the special shares IPC$ or ADMIN$, you may not specify a 03778 path. 03778 03778 ACTION 03778 03778 Retype the command without a path. For example, NET SHARE ADMIN$. 03778 03779 User or group *** is already a member of local group ***. 03779 EXPLANATION 03779 03779 The account (user or global group) is already in the local group you are trying 03779 to add it to. 03779 03779 ACTION 03779 03779 No action is needed. 03779 03780 There is no such user or group: ***. 03780 EXPLANATION 03780 03780 The user or group specified does not exist. 03780 03780 ACTION 03780 03780 Retype the command with a correct user name or group name. 03780 03781 There is no such computer: ***. 03781 EXPLANATION 03781 03781 The computer account specified does not exist. 03781 03781 ACTION 03781 03781 Retype the command with a correct computer name. 03781 03782 The computer *** already exists. 03782 EXPLANATION 03782 03782 The computer account specified already exists. 03782 03782 ACTION 03782 03782 Choose a different computer name. 03782 03783 There is no such global user or group: ***. 03783 EXPLANATION 03783 03783 The global user or group specified does not exist. 03783 03783 ACTION 03783 03783 Retype the command with a correct user name or group name. 03783 03784 Only disk shares can be marked as cacheable 03790 The system could not find message: ***. 03790 EXPLANATION 03790 03790 The system could not find the message. 03790 03790 ACTION 03790 03790 Contact your system administrator. 03790 03802 This schedule date is invalid. 03802 EXPLANATION 03802 03802 You typed an invalid schedule date. 03802 03802 ACTION 03802 03802 Specify either a day of the month represented by a number between 1 and 31, or 03802 a day of the week represented by one of the following abbreviations: M, T, W, 03802 Th, F, Sa, Su. 03802 03803 The LANMAN root directory is unavailable. 03803 EXPLANATION 03803 03803 This message should occur only on a down-level computer. Any action to correct 03803 the problem should be performed on that computer. 03803 The root directory for LAN Manager is unavailable. 03803 03803 ACTION 03803 03803 Be sure the workstation is running and the directory 03803 containing the LAN Manager software is accessible. 03803 03804 The SCHED.LOG file could not be opened. 03804 EXPLANATION 03804 03804 This message should occur only on a down-level computer. Any action to correct 03804 the problem should be performed on that computer. 03804 Either the SCHED.LOG file has been opened by another process or the disk is 03804 full. 03804 03804 ACTION 03804 03804 Be sure the disk is not full. 03804 03804 If another process has opened the file, you will have to wait for it to close 03804 the file before you can open it. 03804 03805 The Server service has not been started. 03805 EXPLANATION 03805 03805 The Server service must be running for this command to run. 03805 03805 ACTION 03805 03805 Start the server, and then retype the command. 03805 03806 The AT job ID does not exist. 03806 EXPLANATION 03806 03806 You specified a job identification number that does not exist. 03806 03806 ACTION 03806 03806 To see the list of jobs and identification numbers in the schedule file, type: 03806 03806 AT 03806 03807 The AT schedule file is corrupted. 03807 EXPLANATION 03807 03807 This message should occur only on a down-level computer. Any action to correct 03807 the problem should be performed on that computer. 03807 The schedule file is damaged. 03807 03807 ACTION 03807 03807 Restore the schedule file, SCHED.LOG, from a backup copy, or delete the file 03807 and create a new one with the AT utility. SCHED.LOG is in the LANMAN\LOGS 03807 directory. 03807 03808 The delete failed due to a problem with the AT schedule file. 03808 EXPLANATION 03808 03808 This message should occur only on a down-level computer. Any action to correct 03808 the problem should be performed on that computer. 03808 LAN Manager cannot find the job you are trying to delete. 03808 03808 ACTION 03808 03808 Check the job identification number by typing: 03808 03808 AT 03808 03808 Try again to delete the job, using the correct job identification number. 03808 03808 If the error persists, the schedule file, SCHED.LOG, may be damaged. Restore 03808 SCHED.LOG from a backup copy, or delete it and create a new one with the AT 03808 utility. SCHED.LOG is in the LANMAN\LOGS directory. 03808 03809 The command line cannot exceed 259 characters. 03809 EXPLANATION 03809 03809 Commands used with the AT utility cannot exceed 259 characters. 03809 03809 ACTION 03809 03809 Type a command with 259 or fewer characters. 03809 03810 The AT schedule file could not be updated because the disk is full. 03810 EXPLANATION 03810 03810 This message should occur only on a down-level computer. Any action to correct 03810 the problem should be performed on that computer. 03810 You cannot update the schedule file because the disk is 03810 full. 03810 03810 ACTION 03810 03810 Make room on the disk by deleting unnecessary files. 03810 03812 The AT schedule file is invalid. Please delete the file and create a new one. 03812 EXPLANATION 03812 03812 This message should occur only on a down-level computer. Any action to correct 03812 the problem should be performed on that computer. 03812 The schedule file has been damaged, possibly by system errors. 03812 03812 ACTION 03812 03812 Restore the schedule file, SCHED.LOG, from a backup copy, or delete the file 03812 and create a new one with the AT utility. SCHED.LOG is in the LANMAN\LOGS 03812 directory. 03812 03813 The AT schedule file was deleted. 03813 EXPLANATION 03813 03813 The schedule file was cleared. 03813 03813 ACTION 03813 03813 No action is needed. 03813 03814 The syntax of this command is: 03814 03814 AT [id] [/DELETE] 03814 AT time [/EVERY:date | /NEXT:date] command 03814 03814 The AT command schedules a program command to run at a 03814 later date and time on a server. It also displays the 03814 list of programs and commands scheduled to be run. 03814 03814 You can specify the date as M,T,W,Th,F,Sa,Su or 1-31 03814 for the day of the month. 03814 03814 You can specify the time in the 24 hour HH:MM format. 03815 The AT command has timed-out. 03815 Please try again later. 03815 EXPLANATION 03815 03815 The command could not be completed because another scheduled command is 03815 currently running. 03815 03815 ACTION 03815 03815 Try the command later. 03815 03816 The minimum password age for user accounts cannot be greater 03816 than the maximum password age. 03816 EXPLANATION 03816 03816 The minimum password age specified must not be greater than the maximum. 03816 03816 ACTION 03816 03816 Specify a minimum password age that is less than the maximum password age. 03816 03817 You have specified a value that is incompatible 03817 with servers with down-level software. Please specify a lower value. 03817 EXPLANATION 03817 03817 User account values cannot be replicated to down-level servers unless the 03817 account values are compatible with the down-level server's values. 03817 03817 ACTION 03817 03817 No action is needed. 03817 03870 *** is not a valid computer name. 03870 EXPLANATION 03870 03870 The computer name you specified is invalid. 03870 03870 ACTION 03870 03870 Check the spelling of the computer name. 03870 03871 *** is not a valid Windows 2000 network message number. 03871 EXPLANATION 03871 03871 The specified message number does not represent a Windows NT message. 03871 03871 ACTION 03871 03871 Check that you typed the correct message number. To see more information about 03871 system messages, type: 03871 03871 NET HELPMSG message# 03871 03871 where message# is the message number. 03871 03900 Message from *** to *** on *** 03901 **** 03902 **** unexpected end of message **** 03905 Press ESC to exit 03906 ... 03910 Current time at *** is *** 03911 The current local clock is *** 03911 Do you want to set the local computer's time to match the 03911 time at ***? ***: 03912 Could not locate a time-server. 03913 Could not find the domain controller for domain ***. 03913 EXPLANATION 03913 03913 Either this domain does not have logon security and therefore does not have a 03913 domain controller, or its domain controller is unavailable. 03913 03913 ACTION 03913 03913 If this domain does not have logon security, you cannot use this command. 03913 Otherwise, retry the command. If the problem persists, ask your network 03913 administrator if the domain controller is running. 03913 03914 Local time (GMT***) at *** is *** 03915 The user's home directory could not be determined. 03915 EXPLANATION 03915 03915 The system could not determine your home directory. 03915 03915 ACTION 03915 03915 Ask your network administrator to add a home directory for you. 03915 03916 The user's home directory has not been specified. 03916 EXPLANATION 03916 03916 The system could not determine your home directory. 03916 03916 ACTION 03916 03916 Ask your network administrator to add a home directory for you. 03916 03917 The name specified for the user's home directory (***) is not a universal 03917 naming convention (UNC) name. 03917 EXPLANATION 03917 03917 Your home directory is not a network path that can be connected to. The 03917 directory must specify a full path, including the server and share names. 03917 03917 ACTION 03917 03917 Ask your network administrator to verify that the home directory path specified 03917 in the user account is correct. 03917 03918 Drive *** is now connected to ***. Your home directory is ***\***. 03919 Drive *** is now connected to ***. 03920 There are no available drive letters left. 03932 *** is not a valid domain or workgroup name. 03932 EXPLANATION 03932 03932 The name you specified is not a valid domain or workgroup name. 03932 03932 ACTION 03932 03932 Check the spelling of the name. Retype the command with a valid domain or 03932 workgroup name. 03932 03935 The current SNTP value is: *** 03936 This computer is not currently configured to use a specific SNTP server. 03937 This current autoconfigured SNTP value is: *** 03951 You specified too many values for the *** option. 03951 EXPLANATION 03951 03951 You specified too many values for the listed option. 03951 03951 ACTION 03951 03951 Retype the command with the correct number of values. To see the syntax of this 03951 command, type: 03951 03951 NET HELP command 03951 03952 You entered an invalid value for the *** option. 03952 EXPLANATION 03952 03952 You typed an invalid value for the listed option. 03952 03952 ACTION 03952 03952 Retype the command with valid values. To see the syntax of this command, type: 03952 03952 NET HELP command 03952 03953 The syntax is incorrect. 03953 EXPLANATION 03953 03953 You did not use the correct syntax of this command. 03953 03953 ACTION 03953 03953 To see the syntax of this command, type: 03953 03953 NET HELP command 03953 03960 You specified an invalid file number. 03960 EXPLANATION 03960 03960 The file identification number you specified is either outside the valid range 03960 or is nonnumeric. 03960 03960 ACTION 03960 03960 Retype the command with a valid file identification number. To see a list of 03960 the server's open files and their identification numbers, type: 03960 03960 NET FILE 03960 03961 You specified an invalid print job number. 03961 EXPLANATION 03961 03961 The print job identification number you specified is either outside the valid 03961 range or is nonnumeric. 03961 03961 ACTION 03961 03961 Retype the command with a valid print job identification number. To see a list 03961 of a server's print jobs, type: 03961 03961 NET PRINT \\computername\sharename 03961 03961 03963 The user or group account specified cannot be found. 03963 EXPLANATION 03963 03963 The user or group account you typed does not exist. 03963 03963 ACTION 03963 03963 Retype the command, specifying an existing account. 03965 The user was added but could not be enabled for File and Print 03965 Services for NetWare. 03966 File and Print Services for NetWare is not installed. 03967 Cannot set user properties for File and Print Services for NetWare. 03968 Password for *** is: *** 03969 NetWare compatible logon 04300 The media identifier does not represent a valid medium. 04301 The library identifier does not represent a valid library. 04302 The media pool identifier does not represent a valid media pool. 04303 The drive and medium are not compatible or exist in different libraries. 04304 The medium currently exists in an offline library and must be online to perform this operation. 04305 The operation cannot be performed on an offline library. 04306 The library, drive, or media pool is empty. 04307 The library, drive, or media pool must be empty to perform this operation. 04308 No media is currently available in this media pool or library. 04309 A resource required for this operation is disabled. 04310 The media identifier does not represent a valid cleaner. 04311 The drive cannot be cleaned or does not support cleaning. 04312 The object identifier does not represent a valid object. 04313 Unable to read from or write to the database. 04314 The database is full. 04315 The medium is not compatible with the device or media pool. 04316 The resource required for this operation does not exist. 04317 The operation identifier is not valid. 04318 The media is not mounted or ready for use. 04319 The device is not ready for use. 04320 The operator or administrator has refused the request. 04321 The drive identifier does not represent a valid drive. 04322 Library is full. No slot is available for use. 04323 The transport cannot access the medium. 04324 Unable to load the medium into the drive. 04325 Unable to retrieve the drive status. 04326 Unable to retrieve the slot status. 04327 Unable to retrieve status about the transport. 04328 Cannot use the transport because it is already in use. 04329 Unable to open or close the inject/eject port. 04330 Unable to eject the medium because it is in a drive. 04331 A cleaner slot is already reserved. 04332 A cleaner slot is not reserved. 04333 The cleaner cartridge has performed the maximum number of drive cleanings. 04334 Unexpected on-medium identifier. 04335 The last remaining item in this group or resource cannot be deleted. 04336 The message provided exceeds the maximum size allowed for this parameter. 04337 The volume contains system or paging files. 04338 The media type cannot be removed from this library since at least one drive in the library reports it can support this media type. 04339 This offline media cannot be mounted on this system since no enabled drives are present which can be used. 04340 (Y/N) [Y] 04341 (Y/N) [N] 04342 Error 04343 OK 04344 Y 04345 N 04346 Any 04347 A 04348 P 04349 (not found) 04350 The remote storage service was not able to recall the file. 04351 The remote storage service is not operational at this time. 04352 The remote storage service encountered a media error. 04354 Please type the password: 04358 Type a password for the user: 04359 Type the password for the shared resource: 04360 Type your password: 04361 Retype the password to confirm: 04362 Type the user's old password: 04363 Type the user's new password: 04364 Type your new password: 04365 Type the Replicator service password: 04368 Type your user name: 04372 Print job detail 04378 The following running services can be controlled: 04379 Statistics are available for the following running services: 04381 The syntax of this command is: 04382 The options of this command are: 04383 Please enter the name of the Primary Domain Controller: 04385 Sunday 04386 Monday 04387 Tuesday 04388 Wednesday 04389 Thursday 04390 The file or directory is not a reparse point. 04391 The reparse point attribute cannot be set because it conflicts with an existing attribute. 04392 The data present in the reparse point buffer is invalid. 04393 The tag present in the reparse point buffer is invalid. 04394 There is a mismatch between the tag specified in the request and the tag present in the reparse point. 04395 W 04396 Th 04397 F 04398 S 04399 Sa 04401 Group name 04402 Comment 04403 Members 04406 Alias name 04407 Comment 04408 Members 04411 User name 04412 Full Name 04413 Comment 04414 User's comment 04415 Parameters 04416 Country code 04417 Privilege level 04418 Operator privileges 04419 Account active 04420 Account expires 04421 Password last set 04422 Password expires 04423 Password changeable 04424 Workstations allowed 04425 Maximum disk space 04426 Unlimited 04427 Local Group Memberships 04428 Domain controller 04429 Logon script 04430 Last logon 04431 Global Group memberships 04432 Logon hours allowed 04433 All 04434 None 04436 Home directory 04437 Password required 04438 User may change password 04439 User profile 04440 Locked 04450 Computer name 04451 User name 04452 Software version 04453 Workstation active on 04454 Windows NT root directory 04455 Workstation domain 04456 Logon domain 04457 Other domain(s) 04458 COM Open Timeout (sec) 04459 COM Send Count (byte) 04460 COM Send Timeout (msec) 04461 DOS session print time-out (sec) 04462 Maximum error log size (K) 04463 Maximum cache memory (K) 04464 Number of network buffers 04465 Number of character buffers 04466 Size of network buffers 04467 Size of character buffers 04468 Full Computer name 04469 Workstation Domain DNS Name 04470 Windows 2000 04481 Server Name 04482 Server Comment 04483 Send administrative alerts to 04484 Software version 04485 Peer Server 04486 Windows NT 04487 Server Level 04488 Windows NT Server 04489 Server is active on 04492 Server hidden 04500 Single Instance Storage is not available on this volume. 04506 Maximum Logged On Users 04507 Maximum concurrent administrators 04508 Maximum resources shared 04509 Maximum connections to resources 04510 Maximum open files on server 04511 Maximum open files per session 04512 Maximum file locks 04520 Idle session time (min) 04526 Share-level 04527 User-level 04530 Unlimited Server 04570 Force user logoff how long after time expires?: 04571 Lock out account after how many bad passwords?: 04572 Minimum password age (days): 04573 Maximum password age (days): 04574 Minimum password length: 04575 Length of password history maintained: 04576 Computer role: 04577 Primary Domain controller for workstation domain: 04578 Lockout threshold: 04579 Lockout duration (minutes): 04580 Lockout observation window (minutes): 04600 Statistics since 04601 Sessions accepted 04602 Sessions timed-out 04603 Sessions errored-out 04604 Kilobytes sent 04605 Kilobytes received 04606 Mean response time (msec) 04607 Network errors 04608 Files accessed 04609 Print jobs spooled 04610 System errors 04611 Password violations 04612 Permission violations 04613 Communication devices accessed 04614 Sessions started 04615 Sessions reconnected 04616 Sessions starts failed 04617 Sessions disconnected 04618 Network I/O's performed 04619 Files and pipes accessed 04620 Times buffers exhausted 04621 Big buffers 04622 Request buffers 04626 Connections made 04627 Connections failed 04630 Bytes received 04631 Server Message Blocks (SMBs) received 04632 Bytes transmitted 04633 Server Message Blocks (SMBs) transmitted 04634 Read operations 04635 Write operations 04636 Raw reads denied 04637 Raw writes denied 04638 Network errors 04639 Connections made 04640 Reconnections made 04641 Server disconnects 04642 Sessions started 04643 Hung sessions 04644 Failed sessions 04645 Failed operations 04646 Use count 04647 Failed use count 04655 The message name forwarding was successfully canceled. 04661 The password was changed successfully. 04664 The message was successfully sent to all users of the network. 04666 The message was successfully sent to all users of this server. 04696 Windows NT Server 04697 Windows NT Workstation 04698 MS-DOS Enhanced Workstation 04700 Server Name Remark 04701 Share name Type Used as Comment 04702 (UNC) 04703 ... 04704 Domain 04706 Other available networks are: 04710 Disk 04711 Print 04712 Comm 04713 IPC 04714 Status Local Remote Network 04715 OK 04716 Dormant 04717 Paused 04718 Disconnected 04719 Error 04720 Connecting 04721 Reconnecting 04722 Status 04723 Local name 04724 Remote name 04725 Resource type 04726 # Opens 04727 # Connections 04728 Unavailable 04730 Share name Resource Remark 04731 Share name 04732 Resource 04733 Spooled 04734 Permission 04735 Maximum users 04736 No limit 04737 Users 04740 ID Path User name # Locks 04741 File ID 04742 Locks 04743 Permissions 04750 Computer User name Client Type Opens Idle time 04751 Computer 04752 Sess time 04753 Idle time 04754 Share name Type # Opens 04755 Client type 04756 Guest logon 04770 Offline cache enabled: manual restore 04771 Offline cache enabled: automatic restore 04772 Offline cache enabled: no sharing among users 04773 Offline cache disabled 04774 Automatic 04775 Manual 04800 Name 04801 Forwarded to 04802 Forwarded to you from 04803 Users of this server 04804 Net Send has been interrupted by a Ctrl+Break from the user. 04810 Name Job # Size Status 04811 jobs 04812 Print 04813 Name 04814 Job # 04815 Size 04816 Status 04817 Separator file 04818 Comment 04819 Priority 04820 Print after 04821 Print until 04822 Print processor 04823 Additional info 04824 Parameters 04825 Print Devices 04826 Printer Active 04827 Printer held 04828 Printer error 04829 Printer being deleted 04830 Printer status unknown 04841 Job # 04842 Submitting user 04843 Notify 04844 Job data type 04845 Job parameters 04846 Waiting 04847 Held in queue 04848 Spooling 04849 Paused 04850 Offline 04851 Error 04852 Out of paper 04853 Intervention required 04854 Printing 04855 on 04862 Driver 04930 User name Type Date 04931 Lockout 04932 Service 04933 Server 04934 Server started 04935 Server paused 04936 Server continued 04937 Server stopped 04938 Session 04939 Logon Guest 04940 Logon User 04941 Logon Administrator 04942 Logoff normal 04943 Logon 04944 Logoff error 04945 Logoff auto-disconnect 04946 Logoff administrator-disconnect 04947 Logoff forced by logon restrictions 04948 Service 04957 Account 04964 Account system settings were modified 04965 Logon restriction 04966 Limit exceeded: UNKNOWN 04967 Limit exceeded: Logon hours 04968 Limit exceeded: Account expired 04969 Limit exceeded: Workstation ID invalid 04970 Limit exceeded: Account disabled 04971 Limit exceeded: Account deleted 04972 Share 04978 Bad password 04979 Administrator privilege required 04980 Access 04984 Access denied 04985 Unknown 04986 Other 04987 Duration: 04988 Duration: Not available 04989 Duration: Less than one second 04990 (none) 04994 Access ended 04995 Log on to network 04996 Logon denied 04997 Program Message Time 04999 Account unlocked by administrator 05000 Log off network 05001 The cluster resource cannot be moved to another group because other resources are dependent on it. 05002 The cluster resource dependency cannot be found. 05003 The cluster resource cannot be made dependent on the specified resource because it is already dependent. 05004 The cluster resource is not online. 05005 A cluster node is not available for this operation. 05006 The cluster resource is not available. 05007 The cluster resource could not be found. 05008 The cluster is being shut down. 05009 A cluster node cannot be evicted from the cluster while it is online. 05010 The object already exists. 05011 The object is already in the list. 05012 The cluster group is not available for any new requests. 05013 The cluster group could not be found. 05014 The operation could not be completed because the cluster group is not online. 05015 The cluster node is not the owner of the resource. 05016 The cluster node is not the owner of the group. 05017 The cluster resource could not be created in the specified resource monitor. 05018 The cluster resource could not be brought online by the resource monitor. 05019 The operation could not be completed because the cluster resource is online. 05020 The cluster resource could not be deleted or brought offline because it is the quorum resource. 05021 The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource. 05022 The cluster software is shutting down. 05023 The group or resource is not in the correct state to perform the requested operation. 05024 The properties were stored but not all changes will take effect until the next time the resource is brought online. 05025 The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class. 05026 The cluster resource could not be deleted since it is a core resource. 05027 The quorum resource failed to come online. 05028 The quorum log could not be created or mounted successfully. 05029 The cluster log is corrupt. 05030 The record could not be written to the cluster log since it exceeds the maximum size. 05031 The cluster log exceeds its maximum size. 05032 No checkpoint record was found in the cluster log. 05033 The minimum required disk space needed for logging is not available. 05034 The cluster node failed to take control of the quorum resource because the resource is owned by another active node. 05035 A cluster network is not available for this operation. 05036 A cluster node is not available for this operation. 05037 All cluster nodes must be running to perform this operation. 05038 A cluster resource failed. 05039 The cluster node is not valid. 05040 The cluster node already exists. 05041 A node is in the process of joining the cluster. 05042 The cluster node was not found. 05043 The cluster local node information was not found. 05044 The cluster network already exists. 05045 The cluster network was not found. 05046 The cluster network interface already exists. 05047 The cluster network interface was not found. 05048 The cluster request is not valid for this object. 05049 The cluster network provider is not valid. 05050 The cluster node is down. 05051 The cluster node is not reachable. 05052 The cluster node is not a member of the cluster. 05053 A cluster join operation is not in progress. 05054 The cluster network is not valid. 05055 Mar 05056 The cluster node is up. 05057 The cluster IP address is already in use. 05058 The cluster node is not paused. 05059 No cluster security context is available. 05060 The cluster network is not configured for internal cluster communication. 05061 The cluster node is already up. 05062 The cluster node is already down. 05063 The cluster network is already online. 05064 The cluster network is already offline. 05065 The cluster node is already a member of the cluster. 05066 The cluster network is the only one configured for internal cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network. 05067 One or more cluster resources depend on the network to provide service to clients. The client access capability cannot be removed from the network. 05068 This operation cannot be performed on the cluster resource as it the quorum resource. You may not bring the quorum resource offline or modify its possible owners list. 05069 The cluster quorum resource is not allowed to have any dependencies. 05070 The cluster node is paused. 05071 The cluster resource cannot be brought online. The owner node cannot run this resource. 05072 The cluster node is not ready to perform the requested operation. 05073 The cluster node is shutting down. 05074 The cluster join operation was aborted. 05075 The cluster join operation failed due to incompatible software versions between the joining node and its sponsor. 05076 This resource cannot be created because the cluster has reached the limit on the number of resources it can monitor. 05077 The system configuration changed during the cluster join or form operation. The join or form operation was aborted. 05078 The specified resource type was not found. 05079 The specified node does not support a resource of this type. This may be due to version inconsistencies or due to the absence of the resource DLL on this node. 05080 The specified resource name is not supported by this resource DLL. This may be due to a bad (or changed) name supplied to the resource DLL. 05081 No authentication package could be registered with the RPC server. 05082 You cannot bring the group online because the owner of the group is not in the preferred list for the group. To change the owner node for the group, move the group. 05083 The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This may happen during a join operation if the cluster database was changing during the join. 05084 The resource monitor will not allow the fail operation to be performed while the resource is in its current state. This may happen if the resource is in a pending state. 05085 A non locker code got a request to reserve the lock for making global updates. 05086 The quorum disk could not be located by the cluster service. 05087 The backed up cluster database is possibly corrupt. 05088 A DFS root already exists in this cluster node. 05089 An attempt to modify a resource property failed because it conflicts with another existing property. 05090 Spain 05091 Denmark 05092 Sweden 05093 Norway 05094 Germany 05095 Australia 05096 Japan 05097 Korea 05098 China (PRC) 05099 Taiwan 05100 Asia 05101 Portugal 05102 Finland 05103 Arabic 05104 Hebrew 05153 The UPS service is about to perform final shut down. 05170 The Workstation must be started with the NET START command. 05175 Remote IPC 05176 Remote Admin 05177 Default share 05291 Never 05292 Never 05293 Never 05295 NET.HLP 05296 NET.HLP 05300 The network control block (NCB) request completed successfully. 05300 The NCB is the data. 05301 Illegal network control block (NCB) buffer length on SEND DATAGRAM, 05301 SEND BROADCAST, ADAPTER STATUS, or SESSION STATUS. 05301 The NCB is the data. 05302 The data descriptor array specified in the network control block (NCB) is 05302 invalid. The NCB is the data. 05303 The command specified in the network control block (NCB) is illegal. 05303 The NCB is the data. 05304 The message correlator specified in the network control block (NCB) is 05304 invalid. The NCB is the data. 05305 A network control block (NCB) command timed-out. The session may have 05305 terminated abnormally. The NCB is the data. 05306 An incomplete network control block (NCB) message was received. 05306 The NCB is the data. 05307 The buffer address specified in the network control block (NCB) is illegal. 05307 The NCB is the data. 05308 The session number specified in the network control block (NCB) is not active. 05308 The NCB is the data. 05309 No resource was available in the network adapter. 05309 The network control block (NCB) request was refused. The NCB is the data. 05310 The session specified in the network control block (NCB) was closed. 05310 The NCB is the data. 05311 The network control block (NCB) command was canceled. 05311 The NCB is the data. 05312 The message segment specified in the network control block (NCB) is 05312 illogical. The NCB is the data. 05313 The name already exists in the local adapter name table. 05313 The network control block (NCB) request was refused. The NCB is the data. 05314 The network adapter name table is full. 05314 The network control block (NCB) request was refused. The NCB is the data. 05315 The network name has active sessions and is now de-registered. 05315 The network control block (NCB) command completed. The NCB is the data. 05316 A previously issued Receive Lookahead command is active 05316 for this session. The network control block (NCB) command was rejected. 05316 The NCB is the data. 05317 The local session table is full. The network control block (NCB) request was refused. 05317 The NCB is the data. 05318 A network control block (NCB) session open was rejected. No LISTEN is outstanding 05318 on the remote computer. The NCB is the data. 05319 The name number specified in the network control block (NCB) is illegal. 05319 The NCB is the data. 05320 The call name specified in the network control block (NCB) cannot be found or 05320 did not answer. The NCB is the data. 05321 The name specified in the network control block (NCB) was not found. Cannot put '*' or 05321 00h in the NCB name. The NCB is the data. 05322 The name specified in the network control block (NCB) is in use on a remote adapter. 05322 The NCB is the data. 05323 The name specified in the network control block (NCB) has been deleted. 05323 The NCB is the data. 05324 The session specified in the network control block (NCB) ended abnormally. 05324 The NCB is the data. 05325 The network protocol has detected two or more identical 05325 names on the network. The network control block (NCB) is the data. 05326 An unexpected protocol packet was received. There may be an 05326 incompatible remote device. The network control block (NCB) is the data. 05333 The NetBIOS interface is busy. 05333 The network control block (NCB) request was refused. The NCB is the data. 05334 There are too many network control block (NCB) commands outstanding. 05334 The NCB request was refused. The NCB is the data. 05335 The adapter number specified in the network control block (NCB) is illegal. 05335 The NCB is the data. 05336 The network control block (NCB) command completed while a cancel was occurring. 05336 The NCB is the data. 05337 The name specified in the network control block (NCB) is reserved. 05337 The NCB is the data. 05338 The network control block (NCB) command is not valid to cancel. 05338 The NCB is the data. 05351 There are multiple network control block (NCB) requests for the same session. 05351 The NCB request was refused. The NCB is the data. 05352 There has been a network adapter error. The only NetBIOS 05352 command that may be issued is an NCB RESET. The network control block (NCB) is 05352 the data. 05354 The maximum number of applications was exceeded. 05354 The network control block (NCB) request was refused. The NCB is the data. 05356 The requested resources are not available. 05356 The network control block (NCB) request was refused. The NCB is the data. 05364 A system error has occurred. 05364 The network control block (NCB) request was refused. The NCB is the data. 05365 A ROM checksum failure has occurred. 05365 The network control block (NCB) request was refused. The NCB is the data. 05366 A RAM test failure has occurred. 05366 The network control block (NCB) request was refused. The NCB is the data. 05367 A digital loopback failure has occurred. 05367 The network control block (NCB) request was refused. The NCB is the data. 05368 An analog loopback failure has occurred. 05368 The network control block (NCB) request was refused. The NCB is the data. 05369 An interface failure has occurred. 05369 The network control block (NCB) request was refused. The NCB is the data. 05370 An unrecognized network control block (NCB) return code was received. 05370 The NCB is the data. 05380 A network adapter malfunction has occurred. 05380 The network control block (NCB) request was refused. The NCB is the data. 05381 The network control block (NCB) command is still pending. 05381 The NCB is the data. 05509 Windows 2000 could not be started as configured. 05509 A previous working configuration was used instead. 05600 Could not share the User or Script path. 05601 The password for this computer is not found in the local security 05601 database. 05602 An internal error occurred while accessing the computer's 05602 local or network security database. 05705 The change log cache maintained by the Netlogon service for 05705 database changes is corrupted. The Netlogon service is resetting 05705 the change log. 05728 Could not load any transport. 05739 This domain has more global groups than can be replicated to a LanMan 05739 BDC. Either delete some of your global groups or remove the LanMan 05739 BDCs from the domain. 05742 Service failed to retrieve messages needed to boot remote boot clients. 05743 Service experienced a severe error and can no longer provide remote boot 05743 for 3Com 3Start remote boot clients. 05744 Service experienced a severe system error and will shut itself down. 05760 Service experienced error evaluating RPL configurations. 05761 Service experienced error creating RPL profiles for all configurations. 05762 Service experienced error accessing registry. 05763 Service experienced error replacing possibly outdated RPLDISK.SYS. 05764 Service experienced error adding security accounts or setting 05764 file permissions. These accounts are the RPLUSER local group 05764 and the user accounts for the individual RPL workstations. 05765 Service failed to back up its database. 05766 Service failed to initialize from its database. The database may be 05766 missing or corrupted. Service will attempt restoring the database 05766 from the backup. 05767 Service failed to restore its database from the backup. Service 05767 will not start. 05768 Service sucessfully restored its database from the backup. 05769 Service failed to initialize from its restored database. Service 05769 will not start. 05771 The Remoteboot database was in NT 3.5 / NT 3.51 format and NT is 05771 attempting to convert it to NT 4.0 format. The JETCONV converter 05771 will write to the Application event log when it is finished. 05773 The DNS server for this DC does not support dynamic DNS. 05773 Add the DNS records from the file 'SystemRoot\System32\Config\netlogon.dns' 05773 to the DNS server serving the domain referenced in that file. 05781 Dynamic registration or deregistration of one or more DNS records failed because no DNS servers are available. 06000 The specified file could not be encrypted. 06001 The specified file could not be decrypted. 06002 The specified file is encrypted and the user does not have the ability to decrypt it. 06003 There is no valid encryption recovery policy configured for this system. 06004 The required encryption driver is not loaded for this system. 06005 The file was encrypted with a different encryption driver than is currently loaded. 06006 There are no EFS keys defined for the user. 06007 The specified file is not encrypted. 06008 The specified file is not in the defined EFS export format. 06009 The specified file is read only. 06010 The directory has been disabled for encryption. 06011 The server is not trusted for remote encryption operation. 06118 The list of servers for this workgroup is not currently available 06200 The Task Scheduler service must be configured to run in the System account to function properly. Individual tasks may be configured to run in other accounts. 07001 The specified session name is invalid. 07002 The specified protocol driver is invalid. 07003 The specified protocol driver was not found in the system path. 07004 The specified terminal connection driver was not found in the system path. 07005 A registry key for event logging could not be created for this session. 07006 A service with the same name already exists on the system. 07007 A close operation is pending on the session. 07008 There are no free output buffers available. 07009 The MODEM.INF file was not found. 07010 The modem name was not found in MODEM.INF. 07011 The modem did not accept the command sent to it. Verify that the configured modem name matches the attached modem. 07012 The modem did not respond to the command sent to it. Verify that the modem is properly cabled and powered on. 07013 Carrier detect has failed or carrier has been dropped due to disconnect. 07014 Dial tone not detected within the required time. Verify that the phone cable is properly attached and functional. 07015 Busy signal detected at remote site on callback. 07016 Voice detected at remote site on callback. 07017 Transport driver error 07022 The specified session cannot be found. 07023 The specified session name is already in use. 07024 The requested operation cannot be completed because the terminal connection is currently busy processing a connect, disconnect, reset, or delete operation. 07025 An attempt has been made to connect to a session whose video mode is not supported by the current client. 07035 The application attempted to enable DOS graphics mode. 07035 DOS graphics mode is not supported. 07037 Your interactive logon privilege has been disabled. 07037 Please contact your administrator. 07038 The requested operation can be performed only on the system console. 07038 This is most often the result of a driver or system DLL requiring direct console access. 07040 The client failed to respond to the server connect message. 07041 Disconnecting the console session is not supported. 07042 Reconnecting a disconnected session to the console is not supported. 07044 The request to control another session remotely was denied. 07045 The requested session access is denied. 07049 The specified terminal connection driver is invalid. 07050 The requested session cannot be controlled remotely. 07050 This may be because the session is disconnected or does not currently have a user logged on. Also, you cannot control a session remotely from the system console or control the system console remotely. And you cannot remote control your own current session. 07051 The requested session is not configured to allow remote control. 07052 Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number is currently being used by another user. 07052 Please call your system administrator to obtain a new copy of the Terminal Server client with a valid, unique license number. 07053 Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number has not been entered for this copy of the Terminal Server client. 07053 Please call your system administrator for help in entering a valid, unique license number for this Terminal Server client. 07054 The system has reached its licensed logon limit. 07054 Please try again later. 07055 The client you are using is not licensed to use this system. Your logon request is denied. 07056 The system license has expired. Your logon request is denied. 08001 The file replication service API was called incorrectly. 08002 The file replication service cannot be started. 08003 The file replication service cannot be stopped. 08004 The file replication service API terminated the request. 08004 The event log may have more information. 08005 The file replication service terminated the request. 08005 The event log may have more information. 08006 The file replication service cannot be contacted. 08006 The event log may have more information. 08007 The file replication service cannot satisfy the request because the user has insufficient privileges. 08007 The event log may have more information. 08008 The file replication service cannot satisfy the request because authenticated RPC is not available. 08008 The event log may have more information. 08009 The file replication service cannot satisfy the request because the user has insufficient privileges on the domain controller. 08009 The event log may have more information. 08010 The file replication service cannot satisfy the request because authenticated RPC is not available on the domain controller. 08010 The event log may have more information. 08011 The file replication service cannot communicate with the file replication service on the domain controller. 08011 The event log may have more information. 08012 The file replication service on the domain controller cannot communicate with the file replication service on this computer. 08012 The event log may have more information. 08013 The file replication service cannot populate the system volume because of an internal error. 08013 The event log may have more information. 08014 The file replication service cannot populate the system volume because of an internal timeout. 08014 The event log may have more information. 08015 The file replication service cannot process the request. The system volume is busy with a previous request. 08016 The file replication service cannot stop replicating the system volume because of an internal error. 08016 The event log may have more information. 08017 The file replication service detected an invalid parameter. 08200 An error occurred while installing the directory service. For more information, see the event log. 08201 The directory service evaluated group memberships locally. 08202 The specified directory service attribute or value does not exist. 08203 The attribute syntax specified to the directory service is invalid. 08204 The attribute type specified to the directory service is not defined. 08205 The specified directory service attribute or value already exists. 08206 The directory service is busy. 08207 The directory service is unavailable. 08208 The directory service was unable to allocate a relative identifier. 08209 The directory service has exhausted the pool of relative identifiers. 08210 The requested operation could not be performed because the directory service is not the master for that type of operation. 08211 The directory service was unable to initialize the subsystem that allocates relative identifiers. 08212 The requested operation did not satisfy one or more constraints associated with the class of the object. 08213 The directory service can perform the requested operation only on a leaf object. 08214 The directory service cannot perform the requested operation on the RDN attribute of an object. 08215 The directory service detected an attempt to modify the object class of an object. 08216 The requested cross-domain move operation could not be performed. 08217 Unable to contact the global catalog server. 08218 The policy object is shared and can only be modified at the root. 08219 The policy object does not exist. 08220 The requested policy information is only in the directory service. 08221 A domain controller promotion is currently active. 08222 A domain controller promotion is not currently active 08224 An operations error occurred. 08225 A protocol error occurred. 08226 The time limit for this request was exceeded. 08227 The size limit for this request was exceeded. 08228 The administrative limit for this request was exceeded. 08229 The compare response was false. 08230 The compare response was true. 08231 The requested authentication method is not supported by the server. 08232 A more secure authentication method is required for this server. 08233 Inappropriate authentication. 08234 The authentication mechanism is unknown. 08235 A referral was returned from the server. 08236 The server does not support the requested critical extension. 08237 This request requires a secure connection. 08238 Inappropriate matching. 08239 A constraint violation occurred. 08240 There is no such object on the server. 08241 There is an alias problem. 08242 An invalid dn syntax has been specified. 08243 The object is a leaf object. 08244 There is an alias dereferencing problem. 08245 The server is unwilling to process the request. 08246 A loop has been detected. 08247 There is a naming violation. 08248 The result set is too large. 08249 The operation affects multiple DSAs 08250 The server is not operational. 08251 A local error has occurred. 08252 An encoding error has occurred. 08253 A decoding error has occurred. 08254 The search filter cannot be recognized. 08255 One or more parameters are illegal. 08256 The specified method is not supported. 08257 No results were returned. 08258 The specified control is not supported by the server. 08259 A referral loop was detected by the client. 08260 The preset referral limit was exceeded. 08301 The root object must be the head of a naming context. The root object cannot have an instantiated parent. 08302 The add replica operation cannot be performed. The naming context must be writable in order to create the replica. 08303 A reference to an attribute that is not defined in the schema occurred. 08304 The maximum size of an object has been exceeded. 08305 An attempt was made to add an object to the directory with a name that is already in use. 08306 An attempt was made to add an object of a class that does not have an RDN defined in the schema. 08307 An attempt was made to add an object using an RDN that is not the RDN defined in the schema. 08308 None of the requested attributes were found on the objects. 08309 The user buffer is too small. 08310 The attribute specified in the operation is not present on the object. 08311 Illegal modify operation. Some aspect of the modification is not permitted. 08312 The specified object is too large. 08313 The specified instance type is not valid. 08314 The operation must be performed at a master DSA. 08315 The object class attribute must be specified. 08316 A required attribute is missing. 08317 An attempt was made to modify an object to include an attribute that is not legal for its class. 08318 The specified attribute is already present on the object. 08320 The specified attribute is not present, or has no values. 08321 Mutliple values were specified for an attribute that can have only one value. 08322 A value for the attribute was not in the acceptable range of values. 08323 The specified value already exists. 08324 The attribute cannot be removed because it is not present on the object. 08325 The attribute value cannot be removed because it is not present on the object. 08326 The specified root object cannot be a subref. 08327 Chaining is not permitted. 08328 Chained evaluation is not permitted. 08329 The operation could not be performed because the object's parent is either uninstantiated or deleted. 08330 Having a parent that is an alias is not permitted. Aliases are leaf objects. 08331 The object and parent must be of the same type, either both masters or 08331 both replicas. 08332 The operation cannot be performed because child objects exist. This operation can only be performed on a leaf object. 08333 Directory object not found. 08334 The aliased object is missing. 08335 The object name has bad syntax. 08336 It is not permitted for an alias to refer to another alias. 08337 The alias cannot be dereferenced. 08338 The operation is out of scope. 08340 The DSA object cannot be deleted. 08341 A directory service error has occurred. 08342 The operation can only be performed on an internal master DSA object. 08343 The object must be of class DSA. 08344 Insufficient access rights to perform the operation. 08345 The object cannot be added because the parent is not on the list of possible superiors. 08346 Access to the attribute is not permitted because the attribute is owned by the Security Accounts Manager (SAM). 08347 The name has too many parts. 08348 The name is too long. 08349 The name value is too long. 08350 The directory service encountered an error parsing a name. 08351 The directory service cannot get the attribute type for a name. 08352 The name does not identify an object; the name identifies a phantom. 08353 The security descriptor is too short. 08354 The security descriptor is invalid. 08355 Failed to create name for deleted object. 08356 The parent of a new subref must exist. 08357 The object must be a naming context. 08358 It is not permitted to add an attribute which is owned by the system. 08359 The class of the object must be structural; you cannot instantiate an abstract class. 08360 The schema object could not be found. 08361 A local object with this GUID (dead or alive) already exists. 08362 The operation cannot be performed on a back link. 08363 The cross reference for the specified naming context could not be found. 08364 The operation could not be performed because the directory service is shutting down. 08365 The directory service request is invalid. 08366 The role owner attribute could not be read. 08367 The requested FSMO operation failed. The current FSMO holder could not be contacted. 08368 Modification of a DN across a naming context is not permitted. 08369 The attribute cannot be modified because it is owned by the system. 08370 Only the replicator can perform this function. 08371 The specified class is not defined. 08372 The specified class is not a subclass. 08373 The name reference is invalid. 08374 A cross reference already exists. 08375 It is not permitted to delete a master cross reference. 08376 Subtree notifications are only supported on NC heads. 08377 Notification filter is too complex. 08378 Schema update failed: duplicate RDN. 08379 Schema update failed: duplicate OID. 08380 Schema update failed: duplicate MAPI identifier. 08381 Schema update failed: duplicate schema-id GUID. 08382 Schema update failed: duplicate LDAP display name. 08383 Schema update failed: range-lower less than range upper. 08384 Schema update failed: syntax mismatch. 08385 Schema deletion failed: attribute is used in must-contain. 08386 Schema deletion failed: attribute is used in may-contain. 08387 Schema update failed: attribute in may-contain does not exist. 08388 Schema update failed: attribute in must-contain does not exist. 08389 Schema update failed: class in aux-class list does not exist or is not an auxiliary class. 08390 Schema update failed: class in poss-superiors does not exist. 08391 Schema update failed: class in subclassof list does not exist or does not satisfy hierarchy rules. 08392 Schema update failed: Rdn-Att-Id has wrong syntax. 08393 Schema deletion failed: class is used as auxiliary class. 08394 Schema deletion failed: class is used as sub class. 08395 Schema deletion failed: class is used as poss superior. 08396 Schema update failed in recalculating validation cache. 08397 The tree deletion is not finished. The request must be made again to continue deleting the tree. 08398 The requested delete operation could not be performed. 08399 Cannot read the governs class identifier for the schema record. 08400 The attribute schema has bad syntax. 08401 The attribute could not be cached. 08402 The class could not be cached. 08403 The attribute could not be removed from the cache. 08404 The class could not be removed from the cache. 08405 The distinguished name attribute could not be read. 08406 A required subref is missing. 08407 The instance type attribute could not be retrieved. 08408 An internal error has occurred. 08409 A database error has occurred. 08410 The attribute GOVERNSID is missing. 08411 An expected attribute is missing. 08412 The specified naming context is missing a cross reference. 08413 A security checking error has occurred. 08414 The schema is not loaded. 08415 Schema allocation failed. Please check if the machine is running low on memory. 08416 Failed to obtain the required syntax for the attribute schema. 08417 The global catalog verification failed. The global catalog is not available or does not support the operation. Some part of the directory is currently not available. 08418 The replication operation failed because of a schema mismatch between the servers involved. 08419 The DSA object could not be found. 08420 The naming context could not be found. 08421 The naming context could not be found in the cache. 08422 The child object could not be retrieved. 08423 The modification was not permitted for security reasons. 08424 The operation cannot replace the hidden record. 08425 The hierarchy file is invalid. 08426 The attempt to build the hierarchy table failed. 08427 The directory configuration parameter is missing from the registry. 08428 The attempt to count the address book indices failed. 08429 The allocation of the hierarchy table failed. 08430 The directory service encountered an internal failure. 08431 The directory service encountered an unknown failure. 08432 A root object requires a class of 'top'. 08433 This directory server is shutting down, and cannot take ownership of new floating single-master operation roles. 08434 The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles. 08435 The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers. 08436 The replication operation failed. 08437 An invalid parameter was specified for this replication operation. 08438 The directory service is too busy to complete the replication operation at this time. 08439 The distinguished name specified for this replication operation is invalid. 08440 The naming context specified for this replication operation is invalid. 08441 The distinguished name specified for this replication operation already exists. 08442 The replication system encountered an internal error. 08443 The replication operation encountered a database inconsistency. 08444 The server specified for this replication operation could not be contacted. 08445 The replication operation encountered an object with an invalid instance type. 08446 The replication operation failed to allocate memory. 08447 The replication operation encountered an error with the mail system. 08448 The replication reference information for the target server already exists. 08449 The replication reference information for the target server does not exist. 08450 The naming context cannot be removed because it is replicated to another server. 08451 The replication operation encountered a database error. 08452 The naming context is in the process of being removed or is not replicated from the specified server. 08453 Replication access was denied. 08454 The requested operation is not supported by this version of the directory service. 08455 The replication remote procedure call was cancelled. 08456 The source server is currently rejecting replication requests. 08457 The destination server is currently rejecting replication requests. 08458 The replication operation failed due to a collision of object names. 08459 The replication source has been reinstalled. 08460 The replication operation failed because a required parent object is missing. 08461 The replication operation was preempted. 08462 The replication synchronization attempt was abandoned because of a lack of updates. 08463 The replication operation was terminated because the system is shutting down. 08464 The replication synchronization attempt failed as the destination partial attribute set is not a subset of source partial attribute set. 08465 The replication synchronization attempt failed because a master replica attempted to sync from a partial replica. 08466 The server specified for this replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation. 08467 A schema mismatch is detected between the source and the build used during a replica install. The replica cannot be installed. 08468 Schema update failed: An attribute with the same link identifier already exists. 08469 Name translation: Generic processing error. 08470 Name translation: Could not find the name or insufficient right to see name. 08471 Name translation: Input name mapped to more than one output name. 08472 Name translation: Input name found, but not the associated output format. 08473 Name translation: Unable to resolve completely, only the domain was found. 08474 Name translation: Unable to perform purely syntactical mapping at the client without going out to the wire. 08475 Modification of a constructed att is not allowed. 08476 The OM-Object-Class specified is incorrect for an attribute with the specified syntax. 08477 The replication request has been posted; waiting for reply. 08478 The requested operation requires a directory service, and none was available. 08479 The LDAP display name of the class or attribute contains non-ASCII characters. 08480 The requested search operation is only supported for base searches. 08481 The search failed to retrieve attributes from the database. 08482 The schema update operation tried to add a backward link attribute that has no corresponding forward link. 08483 Source and destination of a cross-domain move do not agree on the object's epoch number. Either source or destination does not have the latest version of the object. 08484 Source and destination of a cross-domain move do not agree on the object's current name. Either source or destination does not have the latest version of the object. 08485 Source and destination for the cross-domain move operation are identical. Caller should use local move operation instead of cross-domain move operation. 08486 Source and destination for a cross-domain move are not in agreement on the naming contexts in the forest. Either source or destination does not have the latest version of the Partitions container. 08487 Destination of a cross-domain move is not authoritative for the destination naming context. 08488 Source and destination of a cross-domain move do not agree on the identity of the source object. Either source or destination does not have the latest version of the source object. 08489 Object being moved across-domains is already known to be deleted by the destination server. The source server does not have the latest version of the source object. 08490 Another operation which requires exclusive access to the PDC FSMO is already in progress. 08491 A cross-domain move operation failed such that two versions of the moved object exist - one each in the source and destination domains. The destination object needs to be removed to restore the system to a consistent state. 08492 This object may not be moved across domain boundaries either because cross-domain moves for this class are disallowed, or the object has some special characteristics, eg: trust account or restricted RID, which prevent its move. 08493 Can't move objects with memberships across domain boundaries as once moved, this would violate the membership conditions of the account group. Remove the object from any account group memberships and retry. 08494 A naming context head must be the immediate child of another naming context head, not of an interior node. 08495 The directory cannot validate the proposed naming context name because it does not hold a replica of the naming context above the proposed naming context. Please ensure that the domain naming master role is held by a server that is configured as a global catalog server, and that the server is up to date with its replication partners. 08496 Destination domain must be in native mode. 08497 The operation can not be performed because the server does not have an infrastructure container in the domain of interest. 08498 Cross-domain move of account groups is not allowed. 08499 Cross-domain move of resource groups is not allowed. 08500 The search flags for the attribute are invalid. The ANR bit is valid only on attributes of Unicode or Teletex strings. 08501 Tree deletions starting at an object which has an NC head as a descendant are not allowed. 08502 The directory service failed to lock a tree in preparation for a tree deletion because the tree was in use. 08503 The directory service failed to identify the list of objects to delete while attempting a tree deletion. 08505 Only an administrator can modify the membership list of an administrative group. 08506 Cannot change the primary group ID of a domain controller account. 08507 An attempt is made to modify the base schema. 08508 Adding a new mandatory attribute to an existing class, deleting a mandatory attribute from an existing class, or adding an optional attribute to the special class Top that is not a backlink attribute (directly or through inheritance, for example, by adding or deleting an auxiliary class) is not allowed. 08509 Schema update is not allowed on this DC. Either the registry key is not set or the DC is not the schema FSMO Role Owner. 08510 An object of this class cannot be created under the schema container. You can only create attribute-schema and class-schema objects under the schema container. 08511 The replica/child install failed to get the objectVersion attribute on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not have permission to read it. 08512 The replica/child install failed to read the objectVersion attribute in the SCHEMA section of the file schema.ini in the system32 directory. 08513 The specified group type is invalid. 08514 You cannot nest global groups in a mixed domain if the group is security-enabled. 08515 You cannot nest local groups in a mixed domain if the group is security-enabled. 08516 A global group cannot have a local group as a member. 08517 A global group cannot have a universal group as a member. 08518 A universal group cannot have a local group as a member. 08519 A global group cannot have a cross-domain member. 08520 A local group cannot have another cross domain local group as a member. 08521 A group with primary members cannot change to a security-disabled group. 08522 The schema cache load failed to convert the string default SD on a class-schema object. 08523 Only DSAs configured to be Global Catalog servers should be allowed to hold the Domain Naming Master FSMO role. 08524 The DSA operation is unable to proceed because of a DNS lookup failure. 08525 While processing a change to the DNS Host Name for an object, the Service Principal Name values could not be kept in sync. 08526 The Security Descriptor attribute could not be read. 08527 The object requested was not found, but an object with that key was found. 08528 The syntax of the linked attribute being added is incorrect. Forward links can only have syntax 2.5.5.1, 2.5.5.7, and 2.5.5.14, and backlinks can only have syntax 2.5.5.1 08529 Security Account Manager needs to get the boot password. 08530 Security Account Manager needs to get the boot key from floppy disk. 08531 Directory Service cannot start. 08532 Directory Services could not start. 08533 The connection between client and server requires packet privacy or better. 08534 The source domain may not be in the same forest as destination. 08535 The destination domain must be in the forest. 08536 The operation requires that destination domain auditing be enabled. 08537 The operation couldn't locate a DC for the source domain. 08538 The source object must be a group or user. 08539 The source object's SID already exists in destination forest. 08540 The source and destination object must be of the same type. 08542 Schema information could not be included in the replication request. 08543 The replication operation could not be completed due to a schema 08543 incompatibility. 08544 The replication operation could not be completed due to a previous schema incompatibility. 08545 The replication update could not be applied because either the source or the destination has not yet received information regarding a recent cross-domain move operation. 08546 The requested domain could not be deleted because there exist domain controllers that still host this domain. 08547 The requested operation can be performed only on a global catalog server. 08548 A local group can only be a member of other local groups in the same domain. 08549 Foreign security principals cannot be members of universal groups. 08550 The attribute is not allowed to be replicated to the GC because of security reasons. 08551 The checkpoint with the PDC could not be taken because there too many modifications being processed currently. 08552 The operation requires that source domain auditing be enabled. 08553 Security principal objects can only be created inside domain naming contexts. 08554 A Service Principal Name (SPN) could not be constructed because the provided hostname is not in the necessary format. 08555 A Filter was passed that uses constructed attributes. 08556 The unicodePwd attribute value must be enclosed in double quotes. 08557 Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased. 08558 For security reasons, the operation must be run on the destination DC. 08559 For security reasons, the source DC must be Service Pack 4 or greater. 08560 Critical Directory Service System objects cannot be deleted during tree delete operations. The tree delete may have been partially performed. 09001 DNS server unable to interpret format. 09002 DNS server failure. 09003 DNS name does not exist. 09004 DNS request not supported by name server. 09005 DNS operation refused. 09006 DNS name that ought not exist, does exist. 09007 DNS RR set that ought not exist, does exist. 09008 DNS RR set that ought to exist, does not exist. 09009 DNS server not authoritative for zone. 09010 DNS name in update or prereq is not in zone. 09016 DNS signature failed to verify. 09017 DNS bad key. 09018 DNS signature validity expired. 09501 No records found for given DNS query. 09502 Bad DNS packet. 09503 No DNS packet. 09504 DNS error, check rcode. 09505 Unsecured DNS packet. 09551 Invalid DNS type. 09552 Invalid IP address. 09553 Invalid property. 09554 Try DNS operation again later. 09555 Record for given name and type is not unique. 09556 DNS name does not comply with RFC specifications. 09557 DNS name is a fully-qualified DNS name. 09558 DNS name is dotted (multi-label). 09559 DNS name is a single-part name. 09560 DNS name contains an invalid character. 09561 DNS name is entirely numeric. 09601 DNS zone does not exist. 09602 DNS zone information not available. 09603 Invalid operation for DNS zone. 09604 Invalid DNS zone configuration. 09605 DNS zone has no start of authority (SOA) record. 09606 DNS zone has no Name Server (NS) record. 09607 DNS zone is locked. 09608 DNS zone creation failed. 09609 DNS zone already exists. 09610 DNS automatic zone already exists. 09611 Invalid DNS zone type. 09612 Secondary DNS zone requires master IP address. 09613 DNS zone not secondary. 09614 Need secondary IP address. 09615 WINS initialization failed. 09616 Need WINS servers. 09617 NBTSTAT initialization call failed. 09618 Invalid delete of start of authority (SOA) 09651 Primary DNS zone requires datafile. 09652 Invalid datafile name for DNS zone. 09653 Failed to open datafile for DNS zone. 09654 Failed to write datafile for DNS zone. 09655 Failure while reading datafile for DNS zone. 09701 DNS record does not exist. 09702 DNS record format error. 09703 Node creation failure in DNS. 09704 Unknown DNS record type. 09705 DNS record timed out. 09706 Name not in DNS zone. 09707 CNAME loop detected. 09708 Node is a CNAME DNS record. 09709 A CNAME record already exists for given name. 09710 Record only at DNS zone root. 09711 DNS record already exists. 09712 Secondary DNS zone data error. 09713 Could not create DNS cache data. 09714 DNS name does not exist. 09715 Could not create pointer (PTR) record. 09716 DNS domain was undeleted. 09717 The directory service is unavailable. 09718 DNS zone already exists in the directory service. 09719 DNS server not creating or reading the boot file for the directory service integrated DNS zone. 09751 DNS AXFR (zone transfer) complete. 09752 DNS zone transfer failed. 09753 Added local WINS server. 09801 Secure update call needs to continue update request. 09851 TCP/IP network protocol not installed. 09852 No DNS servers configured for local system. 10004 A blocking operation was interrupted by a call to WSACancelBlockingCall. 10009 The file handle supplied is not valid. 10013 An attempt was made to access a socket in a way forbidden by its access permissions. 10014 The system detected an invalid pointer address in attempting to use a pointer argument in a call. 10022 An invalid argument was supplied. 10024 Too many open sockets. 10035 A non-blocking socket operation could not be completed immediately. 10036 A blocking operation is currently executing. 10037 An operation was attempted on a non-blocking socket that already had an operation in progress. 10038 An operation was attempted on something that is not a socket. 10039 A required address was omitted from an operation on a socket. 10040 A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself. 10041 A protocol was specified in the socket function call that does not support the semantics of the socket type requested. 10042 An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call. 10043 The requested protocol has not been configured into the system, or no implementation for it exists. 10044 The support for the specified socket type does not exist in this address family. 10045 The attempted operation is not supported for the type of object referenced. 10046 The protocol family has not been configured into the system or no implementation for it exists. 10047 An address incompatible with the requested protocol was used. 10048 Only one usage of each socket address (protocol/network address/port) 10048 is normally permitted. 10049 The requested address is not valid in its context. 10050 A socket operation encountered a dead network. 10051 A socket operation was attempted to an unreachable network. 10052 The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress. 10053 An established connection was aborted by the software in your host machine. 10054 An existing connection was forcibly closed by the remote host. 10055 An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. 10056 A connect request was made on an already connected socket. 10057 A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied. 10058 A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call. 10059 Too many references to some kernel object. 10060 A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. 10061 No connection could be made because the target machine actively refused it. 10062 Cannot translate name. 10063 Name component or name was too long. 10064 A socket operation failed because the destination host was down. 10065 A socket operation was attempted to an unreachable host. 10066 Cannot remove a directory that is not empty. 10067 A Windows Sockets implementation may have a limit on the number of applications that may use it simultaneously. 10068 Ran out of quota. 10069 Ran out of disk quota. 10070 File handle reference is no longer available. 10071 Item is not available locally. 10091 WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable. 10092 The Windows Sockets version requested is not supported. 10093 Either the application has not called WSAStartup, or WSAStartup failed. 10101 Returned by WSARecv or WSARecvFrom to indicate the remote party has initiated a graceful shutdown sequence. 10102 No more results can be returned by WSALookupServiceNext. 10103 A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled. 10104 The procedure call table is invalid. 10105 The requested service provider is invalid. 10106 The requested service provider could not be loaded or initialized. 10107 A system call that should never fail has failed. 10108 No such service is known. The service cannot be found in the specified name space. 10109 The specified class was not found. 10110 No more results can be returned by WSALookupServiceNext. 10111 A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled. 10112 A database query failed because it was actively refused. 11001 No such host is known. 11002 This is usually a temporary error during hostname resolution and means that the local server did not receive a response from an authoritative server. 11003 A non-recoverable error occurred during a database lookup. 11004 The requested name is valid and was found in the database, but it does not have the correct associated data being resolved for. 11005 At least one reserve has arrived. 11006 At least one path has arrived. 11007 There are no senders. 11008 There are no receivers. 11009 Reserve has been confirmed. 11010 Error due to lack of resources. 11011 Rejected for administrative reasons - bad credentials. 11012 Unknown or conflicting style. 11013 Problem with some part of the filterspec or providerspecific buffer in general. 11014 Problem with some part of the flowspec. 11015 General QOS error. 11016 An invalid or unrecognized service type was found in the flowspec. 11017 An invalid or inconsistent flowspec was found in the QOS structure. 11018 Invalid QOS provider-specific buffer. 11019 An invalid QOS filter style was used. 11020 An invalid QOS filter type was used. 11021 An incorrect number of QOS FILTERSPECs were specified in the FLOWDESCRIPTOR. 11022 An object with an invalid ObjectLength field was specified in the QOS provider-specific buffer. 11023 An incorrect number of flow descriptors was specified in the QOS structure. 11024 An unrecognized object was found in the QOS provider-specific buffer. 11025 An invalid policy object was found in the QOS provider-specific buffer. 11026 An invalid QOS flow descriptor was found in the flow descriptor list. 11027 An invalid or inconsistent flowspec was found in the QOS provider specific buffer. 11028 An invalid FILTERSPEC was found in the QOS provider-specific buffer. 11029 An invalid shape discard mode object was found in the QOS provider specific buffer. 11030 An invalid shaping rate object was found in the QOS provider-specific buffer. 11031 A reserved policy element was found in the QOS provider-specific buffer.